Equipment For Sale

POWERMATIC - RB-37, ...Single Head Wide Belt Sander1-Head, 36" width cap., combination sanding head. -- Includes: 4" Dia. contact roll & 2" wide polishing platen, micro-adjust platen; 15 HP main motor. -- Abrasive belt size: 37" x 60"; with air tensioning, air jet abrasive belt tracking.1 HP Feed drive; variable feed speed of 15 - 30 FPM conveyor speed.0" - 5-1/4" Opening with: (4) Screw jacks; double infeed & outfeed rubber covered holddown rolls. -- Complete with: Magnetic starter; overload protection; load meter; emergency brake.

POWERMATIC - WB-25, ...Wide Belt Sander1-Head; 25" width capacity; 1/8" to 6" thickness capacity.Combination sanding head with: 4" Dia. rubber-covered contact roll; 2" wide polishing platen; micro-adjust platen; steel abrasive belt tension roll; steel idler roll: 25" x 75" Abrasive belt capacity.Equipped with: -- 15 HP 3-Phase main motor; 1 HP variable feed motor, 15 - 49 FPM. -- 1/4 HP Table raising & lowering motor with: Auto adjust thickness assist; 1/8" to 6" opening with (4) screw jacks. -- Double infeed & outfeed rubber covered holddown rolls. -- Complete with: -- Digital readout; air eye belt sensing; limit switch overtravel protection; magnetic starter; overload protection; load meter; emergency brake.Includes: Owner's manual & parts list.

Powermatic TS 80 Shaper Call 800-459-2148 for more info.

POWERMATIC Shaper TS-29, with Sliding Table & Tilting SpindleSpecifications: -- 3/4", 1", & 1-1/4" Dia. interchangeable tilting spindle, 3/8" & 1/2" collet & router bit adapters, tilts 45° forward and 5° back, 7-1/2 HP - 3,600 RPM motor; 3,000 - 4,000 - 6,000 - 8,000 - 10,000 RPM spindle speeds via 4-step V-pulley with "quick release". -- 4-3/4" Cap. under nut when using the 1-1/4" spindle, 7-1/16" spindle travel; 51-1/2" x 33-1/2" extra thick cast iron main table, (3) removable table inserts 2-1/2" - 5-1/2" & 5-7/8" x 4-3/16" (oval).Complete with: -- Large scale "ACCU Fence" with integrated 4" dust collection shroud, reversing switch, AMBI-TECH electronic brake, cutterhead guard, clamping miter gauge & magnetic control; incl. owners manual & parts list. Actual Model # 1791284

POWERMATIC - TS-80, ...Single Spindle ShaperAccepts: 3/4" - 1" - 1-1/4" Dia. interchangeable spindles; 5-1/2 HP motor; 3,625 - 5,000 - 7,250 - 10,000 Spindle speeds. -- 4" Cap. under nut when using 1-1/4" spindle; 6-19/64" spindle stroke; approx.: 39-1/2" x 31-1/2" Extra thick cast iron main table. -- Complete with: Adjustable split fence; spring holddowns; removable table inserts; dust collection shroud; reversing switch; spindle brake; cutterhead guard. -- Includes: Infeed & outfeed tables shown in picture. - NOTE: Needs some work on bearings.

Powermatic Model 13 Edge Sander 42" table

Powermatic Model 221 Planer

Powermatic Model 100 12" Planer 3 Phase power

2006 POWERSCREEN CHIEFTAIN 1400 -8785 hours -Hydraulic folding conveyors for quick setup -Screen walkways and access ladders for easy maintenance -Drop-down tail conveyor for screen media changes -Radio-controlled tipping grid -Integrated high-capacity variable-speed belt feeder -Grease-filled 4-bearing,2-deck screenbox -Impressive 400 TPH capacity -Applications Sand & gravel, Blasted rock, River rock, Topsoil, Composted materials, Wood by-products and more!

2021 Powerscreen Chieftain 1400 -1900 hours -2 deck vibratory box -Up to 400 tph -54,895lbs whole system -Tier 4 engine (110H.P) -3 Conveyors Main,Tail(fine),Side(midsize/oversize) -Belts in good shape -Clean ready to work unit

2013 Powerscreen Xh320-3 Trakpactor -8300 hours -No DEF -CAT C9(325H.P) -320 T.P.H -Twin apron -4 Bar rotor -Twin Shaft Vibrator -Hydraulic Folding features for transport and work

2005 Powerscreen 1800 Track Unit, Engine is a Caterpillar, 5000 Hours, Grizely Bars on Top Deck, Scalping Screener, Brand New Tailings Conveyor, New Bearing Housing for Shaker, Complete Engine Service done Recently, Ready to Work. Weight 66,139 lbs Transport width 9'6? Transport length 50'11” Transport Height 11'2" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2001 Powerscreen 725 Trommel Screen, Equipped with Remaned Deutz 100 HP Turbo Diesel, 1000 Hours, Used 1/2" Screen Cloth, New Sticky Belts, All New Brushes, New Tires, All New Radial Stacker Motor, Ready for Work. Weight 55,116 lb Transport length 638" Transport width 108" Transport height 158" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 Power screen 260 Trakpactor -2500 hours -Potential output of 250 tph -Load management to control feed system -Remote -Serviced regularly -Machine weight is 59,525 lbs -Clean machine MORE PICTURES COMING SOON !!!!

(4) Precision Products 14M Chop Saw s/n's: 1839, 1841, 14-1325, 1878

58" Precision T/D 200 HP

Debarker is a Precision heavy duty P742H Rosserhead built to accommodate longer logs.

(7) Precision Up Cut Saws 14M

Precision P748H rosserhead debarker, 32’, 3 7/16" shaft, S/N D-577, debarker will debark logs up to 30’, includes (6) strand infeed deck w/ hydraulic motor/drive, includes Precision 65'barn sweep w/ incline, (ref #181) Call Rachel for more information 931-797-6284

The seller has confirmed that this 96" Precision chipper is in good working/running condition and is ready to load. This was not heavily run. This came out of a chip plant in WA. Model 96.27 - Horizontal feed - Side discharge - 4-Knife whole log chipper - 8" thick chipper dissc - Built in disc brake - Extended front shaft for hydraulic starter - Hydraulic starting motor - Side discharge pipe with motorized outlet adjustment - 27" maximum log diameter - Many spare parts and knives included - Average production rate: 125 tons per hour - No hydraulic pump - No motor - an 800HP one can be added for additional cost though... The photo's show the optional extended shaft and hydraulic starting motor which is a special feature....