Equipment For Sale

Timber Treatment Solutions designs and manufactures turnkey high pressure wood treatment plants for impregnating timber to Use Class 3, Use Class 4 and a variety of other requirements. These plants generally include: – - an autoclave with quick closing door(s) - one or several tanks to store the treatment chemical - a process skid, with all necessary pumps, valves, and pipes - a timber pack handling system, from completely manual to fully automated - a mixing / dosing system - a PC or HMI based control system with our latest plant operating system There are lots of possible configurations, and our teams will be able to advise the most suitable high pressure wood treatment plant for you, according to your needs and budget. Plants can be designed for any of the processes required by the timber impregnation industry: – - Bethel (full cell) – this is the most common for treatment of timber to Use Class 3 and 4 - Rueping (empty cell) – this process cycle is used for more specialist lumber treatments, such as creosote and copper oil, where the impregnation rate needs to be reduced on highly absorbent wood species - Lowry - Special cycles using any combination of vacuum, air pressure & fluid pressure phases, which can be designed on request WHEN TO USE HIGH PRESSURE IMPREGNATION High pressure treatment is widely used whenever deep impregnation of wood by a preservative required: – - Sawn or round posts using water-based copper chemicals (UC3 / UC4) - Poles, sleepers, posts using Creosote, Creosote/Oil mix, CuNap & Copper Oil - Construction timber with fire retardant chemical - For specific applications, such as resin or furfural impregnation before curing

Timber Treatment Solutions impregnation plants can all be fitted with one of our automated timber handling systems. An automated wood handling and storage system is the best option for treating large volumes of timber in a short space of time due to minimising charge changeover times. This makes annual impregnation volumes of over 100,000m3 on a single plant easily achievable. The automated handling system can consist of anything from a transfer car which changes over one charge automatically to a multi-lane multi-level fully automatic system which only requires operator input once per day. Timber Treatment Solutions are the only manufacturer able to offer the patent pending multi-level timber handling and storage system, which can half or even third the building space required for an automated wood package handling system. There are lots of possible configurations and our teams will be able to advise the most suitable for you, according to your needs and budget.

Timber Treatment Solutions designs and manufactures turnkey low pressure wood treatment plants of any size which are suitable for use with any of the existing treatment chemicals on the market, whether they are water based or solvent based. These plants generally include: – - Autoclave or rectangular vessel with quick closing door(s) - One or several tanks to store the treatment chemical - Process skid, with all necessary pumps, valves, and pipes - Timber pack handling system, from completely manual to fully automated - Mixing / Dosing System - PC or HMI based control system with our latest plant operating system There are lots of possible configurations of low pressure plant, and our teams will be able to advise the most suitable for you, according to your needs and budget. Plants can be designed for any of the processes usually required by wood impregnation industry, such as Double Vacuum & Envelope WHEN TO USE LOW PRESSURE TREATMENT? Low pressure treatment is widely used, whenever light impregnation of wood by a preservative is required (also called surface treatment or envelope treatment): - To impregnate timber for Use Class 1, such as timbers that will remain dry (e.g. upper floor joists, truss rafters) - To impregnate timber for Use Class 2, such as timbers that are exposed to a slight risk of wetting or damp (e.g. tile battens, CLS framing) - To impregnate construction timber with fire retardant chemical

1996 Timberjack 810B forwarder, Perkins engine, lots of recent upgrades including center pins, rebuilt control system too much to list. $47,500

1997 Timberjack 460 Grapple Skidder, Hours Reading 17,248, Winch, Enclosed Cab with Heat and Air Conditioning, Full Glass Cab, 28L x 26 Tires, Chains, Center Section is Tight, Ready for the Woods. Length:23 ft 0 in Width:10 ft 1 in Height:10 ft 7 in Weight:30,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1998 Timberjack 460 Grapple Skidder, 9000 Hours, Winch, Tires are 30.5 x 32, New Pins and Bushings, New Valve Bank, Cylinders Repacked, Chains All Around, Ready for the Woods. Length 23 ft 0 in Width 10 ft 1 in Height 10 ft 7 in Weight 30,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1995 Timberjack 380C Grapple Skidder, Winch, Need Drive Shaft for Winch, Cummins 12 Valve, Hours Unknown, Good Tire Tread, Center Section was done recently, More Pictures Coming, Ready for the Woods Length: 23 ft 0 in Width: 10 ft 1 in Height: 10 ft 7 in Weight: 30,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

TBJ430BII parts loader (a lot is the same as a JOHN DEERE loader)

2005 and 2004 Timberjack 1270D Combo -14000 hours -758HD 4 roller head -Good tires -New parts -Ready to work 2004 1270D or for parts -9000 hours -758 HD head -Needs a few things before it hits the woods -Tons of extra parts -Spare parts head as well

TBJ 450C skidder, lots of good parts!

several good 460 TBJ parts axles, cylinders, etc..

Nice Tight Machine 21K Hours Working Dailey add 5K for 1 set of tracks 10K for Both

2001 Timberjack 460D Single Arch Grapple Skidder, No Winch, Enclosed Cab with Heat, No Air Conditioning, NEW ENGINE With 2,000 Hours, Center Section as minor play, 30.5 x 32 Tires, Chains all around, Ready for the Woods. Length 23 ft 0 in Width10 ft 1 in Height10 ft 7 in Weight 30,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1997 Timberjack 560 Dual Arch Grapple Skidder, Remaned Cummins 8.3 Diesel Engine, with 2,000 Hours, 1 Set of Bear Claw Chains, 30.5 x 32 tires 70%, New Fuel Injection Pump, No Winch, Has Large Fuel Tank, Enclosed Cab with Heat No AC, Good Centers Ready for the Woods. Length 305.60" Width 127.50" Operating Wt. 32,450 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Timberjack 608 Logging Processor Track Machine Timberjack 762C Processor Head

2004 Timberjack 360 Cable Skidder, Includes Winch, Enclosed Cab with Heat and Air Conditioning, Good Centers, ORIGINAL HOURS 4,900, Chains, Machine is in Excellent Condition, Ready for The Woods. Length 23 ft 0 in Width 10 ft 1 in Height 10 ft 7 in Weight 30,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Timberjack 1710D Double Bunk Forwarder, Engine has 18,000 Hours, Enclosed Cab with Heat and Air Conditioning, New Center Section, Machine is Ready for the Woods. Operating Weight 42,990 lb Length 35.6ft in Width Over Tires 10.47ft in Height To Top Of Crane 12.8ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Timberjack 230 Skidder

1995 Timberjack 608B, 18 “ head, Cummins Diesel Hours unknown, Small hydraulic leak near the pumps but it runs quite often and no issue 18" koehring saw head runs everyday reliable starts good in the cold… Operating weight 46,300lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1999 Timberjack 460C Winch -Less than 3000 hours and complete rebuild on transmission as well as new shifter -Low hours and rebuilt motor as well as new head and turbo -New front axle pivot bearing -Tires 40% chains 95% -24.5-32 tires -Ready to work