Equipment For Sale

2018 Volvo ECR145EL -2,995 hours -A/C and Heat -Hydraulic Thumb -X1 Auxiliary -Hydraulics Plumbed for Hydraulic Quick Coupler -Push Blade -Engine Block Heater -36” Bucket w/ new teeth -15'1" Boom -8'2" Arm -20" Shoes w/ Bolt-on Rubber Pads

This 2006 Volvo truck is in great condition internally and externally. The truck has 1,429,462.4 miles on it. The truck has an automatic transmission. The passenger seat has been taken off. We are currently waiting for the title of the truck to come in. If interested in this truck call Mr. Gavin 601-394-7796 Mr. Tim 251-366-3237 Kameron 251-242-5493 The truck is located in State Line, Mississippi, 467 St Peter St

MLS Number 12700853 2017 Volvo DD120B Smooth Drum Roller Compactor 700 hours

2019 Volvo ECR88D Excavator with 2500 hours, Quick coupler, Thumb, Blade, New Tracks, Radio, A/C and Heat. Weight 6,012 lb Height To Top Of Cab 8.91ft in Overall width 7' 7? ft in Overall length 20' 11? ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

MLS Number 12496080 2019 Volvo L50H Wheel Loader 3575 hours Volvo D4J Diesel Rockland GPX 2 yard bucket Solid tires @ 70%

Air Conditioner Auxiliary Hydraulics Pressure - High Pressure Beacon Combined Hydraulics EPA Label Hand and Foot Control Lighting Mirrors Pilot Control Radio - AM FM CD Radio Ultra Low Sulfur Diesel Fuel

Volvo L-90C wheel loader, 20,567 hrs., includes log clamp attachment, has quick-attach, working condition

2022 Volvo L70H Wheel Loader Only 1,700 Original Hours, DEF Engine, Long boom Loader, 3rd Function, Ride Control Reversing Fan, Back Up Camera, Electronic Joystick Controls, Load Rite Scales, JRB 416 Coupler, 3.5 Yard Bucket, Extended Warranty Purchased 5000 Hours or 3 Years, 20.5 z 25 Tires, Ready for Work Compare a New Price. Weight 31,107 lbs. Length 24.64ft in Width 8.08ft in Height 10.77ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Volvo wheel loader bucket, 2 yard capacity, good condition

1999 Volvo L50 Wheel Loader, 5800 Hours, 17.5 X 25 Tires, Bucket 2yd, Coupler, Clean/Nice

2016 VOLVO 170H WHEEL LOADER 6,742 HRS QUICK COUPLER 3YD BUCKET HEAT AND AC GOOD TIRES VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

1996 Volvo A35C, 16,981 hrs., Volvo 6cyl. Turbo diesel, automatic trans., 6 wheel drive, front/rear diff locks, tailgate, EROPS, Heat/AC, 26.5R25 tires, new air and fuel filters, %59,500

Vonnegut M9 4 Head Planer/Moulder Serial# 8364, 8" Wide Planer Heads

VOORWOOD "A 515 GH" Arch Door Sander with Floating Head ARCH SANDER with: (4) 1.5 HP Motors for precision sanding; quality sanding using Disc sanding at continuous feed. Equipped with: -- (4) Floating Sanding Stations equipped with: 1.5 HP Precision balanced drive motors and quick change spindles. -- Infeed & outfeed (1st and last) spindles equipped with: Double collets and angular, horizontal & vertical adjustments with accurate and repeatable digital readouts. -- PLC Control with: Monitor at eye level height.Feedthrough Arch Machine capable of sanding arch profiles on cabinet door components, plus can do straight cuts.. .

VOORWOOD M 15A CNC Round End Tenoner & Mortiser for 45° Door --The "M15A" Miter Machine is designed to rapidly make mortise and tenon cuts at 0°, 45° Only, . Parts can be up to 1.5"; thick and up to 4"; wide, and of ANY length. --A primary application for this machine is for miter cabinet door frames. Parts can be quickly transferred from left to right. They are mortised on the left side of the machine and tenoned on the right. The machine can also mill the slots. --Specifications & Equipped with: -- The mortise station has (3) servo-controlled axes (X, Y, and Z) that are coordinated by the machine controller to achieve complex CNC motion. It is equipped with a collet-style router spindle for cutting. The tenon station uses the same X- and Y-servo-controlled axes as the mortise station and is configured for pneumatically actuated in-and-out movement along the Z-axis. The tenon station is equipped with a direct drive shaper spindle for cutting. -- -- Pneumatic clamping assemblies with non-marring urethane pads are mounted to the hold-down assembly to secure the parts during cutting and these can be adjusted to various locations over the cutting surface. -- -- M15 Miter Machine operator interface consists of a colored touch screen. For simplicity, the entire calibration, setup, and monitoring of the machine are accomplished using only four touchscreen displays. The program designs the depth and location of both the mortise and the tenon. When the design is complete, it is saved in a recipe format. Once this recipe is opened, the operation is as simple and boils down to feeding the substrate into the machine. -- -- The full-color touchscreen panel is located on the front of the machine to provide easy access for setting up or operating the machine. Clamping and shaping operations are controlled by operating lighted pushbutton switches.

2024 Vortex Eterra Stump Grinder, VM27, 27 Wheel, 18-30 GPM, Heavy Duty Stump Grinder. Please Call For More Info

While most chippers in this class have openings 12 inches high and from 15 inches to 20 inches wide, the VORTEX® V-12 has an opening of 12 inches high by 32 inches wide .... 50% to 100% bigger. This makes it suitable for multiple markets others can't handle. Tree care, municipalities, utility line maintenance, golf course management, and even light land clearing are all better suited to the VORTEX® V-12 than others in its class. Hand fed or machine fed, the "oversized" opening makes feeding and operating best in class. While operators of other brands must "cut to the opening", VORTEX® V-12 operators can process limbs, branches, and even small whole trees as-is, bringing truth to the statement of "less trim time" that others claim. Another feature of the VORTEX® V-12 design is the ability to throw chips wet or dry, in ANY direction, with velocity unequaled by any other drum-style chipper in its class. This model matches and can even exceed the throwing capability of a disc-style chipper. Add in the revolutionary skinless-no pocket drum, you have the highest capacity, most productive machine in the 12-inch class available in today's market.

LIKE NEW CONDITION AVAILABLE IMMEDIATELY VULCAN Drum Dryer

Wadkin K23 5 Head Moulder Largest Motor is 20HP S/N 99/2093 440 Volt 3 Phase Electric Motors

Wadkin Visage Profile Grinder Manufacturer specs (to be confirmed): 2 Hp, 220 volt three phase, 60 hz Max cutter length (hydrolock) 355 mm (13") Max cutter length (Mechanical) 315 mm (12.4") Max cutting circle (Profiling) 350 mm (13.8") Max cutting circle (Straight knife) 300 mm (12") Min cutting circle 70 mm (2.75") Max cutting depth of profile 40 mm (1.5") Spindle speed 3600 rpm Adjustable axial grinding angles Machine work light Side template holder with micro-adjustment Turret style tracing pin head Front operator arm rest Swing type diamond tipped wheel dresser Push button motor controls Includes (1) 40" mm diameter grinder arbor