Equipment For Sale

150hp, 1775rpm, 4445T frame, working condition

WHIRLWIND - 855, ...Dual Table Oscillating Edge SanderDouble-sided with: 8" x 56" Platens size.Specifications -- 7-1/2 HP - 1,725 RPM TEFC Motor; abrasive belt size: 8" x 151"; approx. (150) oscillations/Min with 3/8" stroke. -- 11" x 55" Side table; tilts 0° - 45° with 8" vertical adjustment; tiltable end table; iron frame machine base. Complete with: -- Magnetic electrical controls w/overload protection; dust hood on drive end; all standard equipment.

MLS Number 11436962 Whirlwind 212 R Pop Up Saw 18” Blade Envelope Pressure 250 psi 10 HP Motor Air Operated Holddown 4" Diameter Dust Chute Maximum Cutting Cycles Per Minute (Approximate): 45 – 50 Cutting Capacity 4? x 10?, 2? x 12?, 1? x 13? Approx. 2,500 pounds

Whirlwind 212 And Others Various Brands And Sizes 8 To Choose From No Feed Tables

Whirlwind Pop-Up saw 212. #00804

Whirlwind Undercut Saw with Tiger Stop Fence

Model 212 Whirlwind Chop Saw, s/n 2594M81L, 18"x8' infeed rolls, upcut saw

Whirlwind Sawdust Blower 36" fan 8 paddle fan 18" inlet reduced down to 17" 16" outlet

Whirlwind Chop Saw Model 1000 5 HP Right to Left hand 5 available

Brand New Whirlwind blowers in stock, 8" -14" inlet, good selection, all with AR-400 steel and Dodge bearings, heavy duty built, call with your needs

Several Whirlwind Up Cut Saws Blade Capacity: 14? Cutting Capacity: 2-3/16? x 8-1/4? Motor HP: 5 Electrical: 230/460V/3PH

Whirlwind Mod. 1000L left hand defect saw w/stop & 7in x 8ft infeed rollers s/n S3074198L

Whirlwind Up Cut Saw with Infeed & Outfeed Rollers

WHITNEY NO. 105 24" x 8" Single-Sided Planer, with Knife SharpenerSpecifications: -- Planing thickness 1/16"; - 8";. -- Min. stock length 13";, 3"; Butted. -- Infeed & Outfeed table sizes 23-3/4" W x 16-1/4"; L. -- Feed speeds 20 - 60 FPM. Equipped with: -- 4-1/2"; Dia. 4-straight knife cutterhead, with 7-1/2 HP - 3.500 RPM Motor. -- 5"; Dia. Segmented serrated infeed with 2"; W Spring-loaded segments & 3-9/16"; Dia. Smooth solid steel outfeed upper feed rollers, with 1-1/2 HP Motor & Micro-feed selector. -- Chip breaker, with 2-1/4"; W Sections. -- (2) 3-9/16"; Dia. Smooth steel in-table feed rollers.Complete with: -- Motorized Knife Sharpener, with 1/4 HP - 1,750 RPM Motor.

wicker forks are on a 644G loader we are parting out . Good condition for information you can contact Gavin 601/394/7796 Tim 251/366/3237 Kameron 251/242/5493 located at 467 Saint Peter Street State Line MS 39362 ALL SALES ARE CASH, CASHIERS CHECK OR BANK TRANSFER.

1999 Wildcat RHC 6-230 Trommel Screen, Tandem Axle, Conveyor Systems, 5th Wheel Hook up with Air Brakes Ready to Screen, Getting more information soon. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Wilkens Walking Floor Brand New Tarp

Williams Hammer Mill 40"w #C740

WILLIAMS - Hammer Mill: Half-round Type ConfigurationFeatures: -- 220 HP Main Drive Motor with Belt Drive; complete with Guard. -- 26"; x 12"; Input Opening. -- Powered Input Pull Rolls -- 4"; Main Shaft with Swing Hammers, approx. 3/8"; thickness -- Ratchet Lift Access Lid. -- Mounted on Steel Support Structure with Access Platform and Ladder -- Pneumatic Bottom Discharge with built-in Viewing Window in Ducting below the Hammermill (no fan included) -- Electrical Cabinet with Motor Starters -- NOTES: This machine was last utilized to break up virgin dried pulp for further processing. Already been removed from service – ready to load.

Williams 125 CJS1 Hammermill