Equipment For Sale

2019 CMI 300 Mulcher, Cat Engine with 1600 hrs. Good undercarriage, FAE mulching head… MACHINE Overall Length: 197 inches Ground Clearance: 19 inches Overall Height: 116 inches Overall Tractor Width: 89 inches MULCHER Overall Width Attachment: 107 inches Working Width: 89 inches Overall Height (pushbar fully retracted): 64 inches Total Weight (Crawler & Mulcher): 28,840 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 CMI 300 Mulcher, Cat Engine with 1600 hrs. Good undercarriage, FAEmulching head… MACHINE Overall Length: 197 inches Ground Clearance: 19 inches Overall Height: 116 inches Overall Tractor Width: 89 inches MULCHER Overall Width Attachment: 107 inches Working Width: 89 inches Overall Height (pushbar fully retracted): 64 inches Total Weight (Crawler & Mulcher): 28,840 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 CMI C175 Twister, 5000 Hours, FAE Head, Excellent Undercarriage, New Head Bearings. Teeth are 90%, New Head Skid Plates, Just Fully Serviced, No Leaks. A/C

2014 CMI C175 TWISTER II Forestry Mulcher with 1,935 hours. Equipped with a with FAE 140/U - 140 mulching head. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 CMI C450 Forestry Mulcher with 2,014 hours. Recent Work Done: Egr cooler A/c compressor Espar Fire suppression inspection LED lights Recent valve set Weight: 47,000 lbs Machine Length: 268 inches Height: 130 inches Width: 112 inches Mulcher Seppi Starforst 250 (Hydraulic Tilt) Overall Width Attachment: 111 inches Overall Height (pushbar fully retracted): 81 inches (206 cm) Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight

Complete, state of the art, drying systems that are custom manufactured for your application, location and production. Systems are designed to be fueled by green wood waste. Sized from 75-600 cubic yards per hour. Contact CMS for more information. - ?Furnace systems complete with fuel bin, dampers & controls - Material infeed & outlet airlocks - Complete ductwork systems - Air recycling systems - All controls & instumentation - Complete system integration

This machine is in good working condition and can be inspected under power. Specs (to be confirmed): - Electric spindle 18.1 HP - X-axis stroke 145.66î - Y-axis stroke 82.67î - Z-axis strke 13î - Working area 145.66î x 68.90î - Automatic tilting head - Telescoping spindle extension for surface polishing - (26) ISO 40 tool holders at rear - Bar code reader for program interface

COE 249D Veneer Lathe with the following: -- 27" maximum log diameter, 110" knife length. -- 1484 Veneer Lathe Big Bar. -- 1390 Veneer Lathe Core drive. -- 3 to 1 inner drive ratio. -- Capable of peeling 35 cubic meters per hour. -- This COE Veneer lathe line was completely rebuilt and installed in 2006. The lathe was operated less than one year and is reportedly in excellent condition.

COE 4 Ft. Veneer Peeling Line with the following major components and features: -- Log cut-off saw. -- Geometric lathe charger. -- Dual spindle 4' COE Model 263 Lathe: &#9679 Diameter of outer spindle 7" &#9679 Diameter of inner spindle 4" &#9679 Max. swing 48" &#9679 Knife length 56" &#9679 Lloyd controls including motor starters &#9679 Main drive DC-AC 165 HP/200 HP -- Veneer conveyor to clipper. -- Pneumatic Clipper.ALSO AVAILABLE: VENTEK Veneer Scanner (no computer included).NOTE: Veneer stackers not included.

Coe 47' x 26' Package type dry Kiln with Controls, 1989 Hurst gas boiler 150 PSI, 6900# Steam Per Hour S/N 51000-750-3, Condensate Tank & Pumps & Electrical. can Buy as a Package or Seperate the Hurst Boiler.

Coe 6' x 9" Double Cut Air Strained Band Mill Model# 972 Serial# 114

Coen 230 Combustion Wood/LP Gas Fired Burner

COLUMBUS MCKINNON - E-915, ...Tire Shredder -- Motor: 250 HP. -- Control panel: 120 Volts. -- Feed opening: 28" x 49". -- Knives width: 2-1/16" (double). -- Weight: 33,000 Lbs. -- Loaded onto Truck.

Comac TAG 100 Package Kiln 30'x36' Gas fired with control room Looks like 70 MBF with 4/4 lumber

Photos coming Compact DDM6 Profile Canter Line Double Length Infeed Production: 27,000 Logs/ 24 hours, 360 FPM (2x6), 500 FPM 2x4 Infeed belt conveyor V flight scanning conveyor without the scanner and optimization system One pass small log processor Outfeed belt conveyor #1 Outfeed lifting belt conveyor #2 Outfeed belt conveyor #3 Lumber landing table Motor Control Centers (MCC) Programmable Logic Controller (PLC) - obsolete

2002 Comact 18' x 10' x 10' Wave Log Feeder

ComacT Edger, 2-Saw Movable, All Motors - $32,000 - Call Jeff for more info at 574-370-5050

Denis 948 Gang Saw

MLS Number 11922341 Denis Comact 948 Gang Saw Edger 6" infeed table Spare guides

2019 Combilift C10000 Pneumatic Tire Forklift with 5,278 hours on a diesel engine. Standard Lift, Overhead Guard, Enclosed cab, Lever Transmission. Fork length 47", Lowered Ht. 148", Max Ht. 230", and Free Lift 113". Tires have 90% tread remaining. Weight 21,000 lb Length 98" Width 86" Height 113" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.