Equipment For Sale

Jet Turret Milling Machine

Oscillating Edge Sander: 1 1/2 HP, 6" x 89" Belt Size (In.), 4,000 SFPM Belt SFPM, CordedFor edge, face, bevel, and contour applications. Oscillating feature reduces heat build-up. Quick-release lever and control dial help track and replace belts. Cast-iron table moves up or down.Specifications: 1-1/2 HP, Hz60, Amps AC18/9, Belt Size 6" x 89", Belt SFPM 4,000, Table Work Surface 32" x 7", Dust Collection Port Size 4" Features: -- 4 in Dust Port Hooks Up to Your Dust Collection System for Efficient Dust Removal, adjustable outer drum, support table enables contour sanding. -- Cast Iron table moves up or down to provide exact work piece positioning, Graphite covered Platen runs cooler increasing machine and belt life. -- Oscillating feature reduces heat build up on sanding belt, Quick Release Lever and Tracking Control Dial are conveniently located for replacing and tracking belts, Tilting Sanding Head for sanding bevels.

2 HP motor 220 volt single phase

New 35 Ton Ag Hydraulic Detach, 53’x102, 34' Well, 33” Heavy Duty 3 Beam Aluminum Slide-outs, 14’ Overall Width, 4 Position Front and Rear Adjustable Ride Height 18-24", Manual Override, Air Ride Suspension, Liquid Air Gauge, Lockable Toolbox, Aluminum Front Deck, Full Center Apitong Wood Floor, Full Covered Rear Deck, 255/70R 22.5 Tires, Strobe Lights with Battery Backup, Keyhole Tie Downs on 3’ Centers, Drings on 6’ Centers Prices are plus FET

JET EHVS-80 6"; x 89" Non-Oscillating Horizontal/Vertical Edge SanderSpecifications: -- Table size 12-1/2"; x 37"; x 3/4"; Thick, Table tilt 0° - 90°. -- Platen size 7" x 34". -- Belt speed 3,900 SFPM.Equipped with: -- 6" x 89" Abrasive belt. -- 1-1/2 HP 3,600 RPM Direct drive motor.Palletized Dimensions: 50" x 31" x 44" H.

JT9-414483 Blade speed 82 - 330 fpm Blade 1/8 - 1/2” Motor 1 HP, 115/230V, 1Ph Dimensions 34 x 24 x 68” Table height 39” 20 x 20 Throat 14” Weight 634#

2006 JLG G6-42A Stand-Up Reach Forklift with 4,093 hours. Max Lift Height 42ft in, Max Forward Reach 28.97ft in, Lift Capacity 6,600 lb. Operating Weight 20,399.4lb Length To Fork Face 17.72ft in Width Over Tires 7.91ft in Overall Height 7.81ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 JLG G5-18A Stand-Up Reach Forklift with 1,157 hours. 74 hp, Max lift Ht. 18.05ft in, Max Forward reach 10.83ft in. Lift Capacity 5,500 lbs. Operating Weight 10,800.5lb 12.6ft in Height 6.4ft in Width 6ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

JLG Man Lift

ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALERSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESS AND INDIVIDUALS! 60 ft Max Lift Height, 500 lb Max Weight Capacity, Jib, Power to Platform, Tier 4, 2014 US EPA Label, Kubota 1 Cylinder 4.5 kW 0.276L Diesel Engine, 36x14LL-22.5 Tires Shipping Not Included- Call For Pricing!

19' Platform Height 25'6" Working Height 30" Platform Width Expandable Platform Non Marking Tires Onboard Charger Upper Controls Lower Controls

JLT 79X-5-DM Door Clamp

JLT 79F-16-PC Multi Level Panel Clamp16' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (36) clamps total manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps # 302-40-H-R with 40" opening with a 3-1/2" high x 4" wide jaw. -- (72) # 80-1706 Rocker adaptor plates for up to 6" thick glue stock -- (1) Fastener and shim kit for precise clamp alignmentAvailable Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1450 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,150 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,275 -- Clamp 3 1/2" X 40" opening ... $ 160 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 16' x 52"W x 70" high

JLT 78H-16W-42L Mini Air Pod PressThis Pneumatic Vertical Clamping System features upper and lower 16" wide and up to 42" long steel platens for face gluing a variety of solid wood components. With its modular design with each section having its own pressure control and 40" opening, Specifications: -- 16" Deep x 42" long clamping capacity. -- Air-operated assembly, for face gluing of engineered stiles & rails, kickers, headers, and many other solid wood applications. -- Single lever valve operation with dial regulator pressure controls for quick & accurate clamping pressure. -- Up to 30 Ton max. clamping pressure @ 120 PSI.

JLT Miter Door Pro Clamp System

JLT Panel Pro Clamp Model 78D-5-S 5-Levels with (6) clamps each with panel flatner 110 v Single phase Will do 80”x 40”

This Pneumatic Vertical Clamping System features upper and lower 12" wide and up to 42" long steel platens for face gluing a variety of solid wood components. With its modular design with each section having its own pressure control and 40" opening, 13" daylight. -- 12" Deep x 42" long clamping cap. -- Air operated assembly, for face gluing of engineered stiles & rails, kickers, headers, and many other solid wood applications. -- Single lever valve operation with dial regulator pressure controls for quick & accurate clamping pressure. -- Up to 30 Ton max. clamping pressure @ 120 PSI.

JLT Drawer Clamp

JLT 79F- 6-PC Multi Level Panel Clamp6' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (8) clamps manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 4" wide jaw. (52" clamp available upon request)Available Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,425 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1100 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,275 -- Clamp 3 1/2" X 40" opening ... $ 142 -- 79-1680-Handle $105 for use with 1/2" drive impact gun (adjustable torque preferred with a setting of 50-55 ft/lbsFloor space requirement: 75" x 70" x 48" high

JLT 79F-12-PC Multi Level Panel Clamp12' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (6) clamps per level (a total of 30) manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 4" wide jaw.Available Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,425 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,100 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,275 -- Clamp 3 1/2" X 40" opening ... $ 142 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 144" x 78" x 52" high