Equipment For Sale

Electric Single Spindle Pocket Drill. Specifications: -- Capacity: Materials from 1/2"- to 1 1/2"-thick. -- 1.5 HP direct drive electric motor (also available 1.5 HP direct drive pneumatic motor); 40" table top working height; 1 Sec cycle time. -- Drills the pocket hole with a 3/8" dia. step bit in (1) smooth operation. The bit is supported all the way to the workpiece by a hardened steel drill guide that ensures tear-out free holes and consistent placement in virtually any material. -- Electrical: 110 VAC, Pneumatics: 90 PSI, recommended for clamping. -- Dimensions: 50"H x 24"W x 24"D (40" table height), 176 lbs.Features: -- 15° Boring angle for greater stability, reduced screw breakout & splitting. -- This produces a smaller "flat bottom" pocket hole with rounded sides that can be plugged with a dowel if desired. Includes: -- Pressure gauge & cycle counter, fence, holddown tower, (1) 3/8" cobalt drill bits, and foot pedal actuation.

Pneumatic Single Spindle Pocket Drill;Specifications: -- 1.25 HP direct drive pneumatic motor; 40" table top working height; (0.5 - 1) Sec cycle time. -- Drills the pocket hole with a 3/8" dia. step bit in (1) smooth operation. -- The bit is supported all the way to the workpiece by a hardened steel drill guide that ensures tear-out free holes and consistent placement in virtually any material. Pneumatics: 120 PSI recommended. Features: -- 15° Boring angle for greater stability, reduced screw breakout & splitting. This produces a smaller "flat-bottom" pocket hole with rounded sides that can be plugged with a dowel if desired. Includes: -- External regulator, filter & lubricator, (1) 3/8" cobalt drill bit, and foot pedal actuation. Just add $150 to the price of the machine for shipping.

Pneumatic Single Spindle Tabletop continuous operation drill;Specifications: -- 1.25 HP direct drive pneumatic motor; 8" tabletop working height; 1 Sec cycle time. -- Drills the pocket hole with a 3/8" dia. step bit in (1) smooth operation; the bit is supported all the way to the workpiece by a hardened steel drill guide that ensures tear-out free holes and consistent placement in virtually any material. -- Capacity: Materials from 1/2"- to 1-1/2" thick.Features: -- Pneumatic drill motor, pneumatic clamping. -- 15° Boring angle for greater stability, reduced screw breakout & splitting; this produces a smaller "flat-bottom" pocket hole with rounded sides that can be plugged with a dowel if desired.Includes: -- External regulator, filter & lubricator, 3/8" cobalt drill bit, and foot pedal actuation.Requires a compressor able to produce 8 CFM at 120 PSI (50% duty cycle).

KREG DK 3100 Pocket Hole Boring MachineElectric 3-spindle Pocket Drill; 1.5 HP direct drive electric motor; 39-1/2" table/ top working height; (0.5 - 1) Sec cycle time. -- Drills (2) pocket holes in (1) machining cycle across rails of varying widths with 3/8" dia. step bit in (1) smooth operation.... Drill spindles in the machine are fixed at 3/4" - 1" and 1-3/4" on center allowing it to handle most common rail widths of 1-1/2" up to 3-3/4" with ease. -- One of the (3) Spindles is with left-handed, simply remove one bit from the spindle not being used to set the desired 2-hole spacing. -- The bits are supported all the way to the workpiece by a hardened steel drill guide that ensures tear-out free holes and consistent placement in virtually any material. -- Features: 15° Boring angle for greater stability, reduced screw breakout & splitting. This produces a smaller "flat-bottom" pocket hole with rounded sides that can be plugged with a dowel if desired. -- Includes: Pressure gauge & cycle counter, fence, holddown & clamping assembly, (2) 3/8" cobalt drill bits, and foot pedal control.

Krusi Krusimatic G2 Log Milling Machine - Capable of milling dovetails, lap joints, joinery, end cuts, key cuts and drill holes - Fully automated - Still installed and available for inspection

2016 KRUZ TRAILER DUMP 32 FT LONG GOOD TARP GOOD TIRES GOOD FLOOR NO RUST FINANCING AVAILABLE WITH NO MONEY DOWN GRANITEHE.COM

2021 KUBOTA KX40-4 MINI EXCAVATOR 389 HOURS 4 WAY BLADE THUMB QUICK COUPLER 24" DIGGING BUCKET 50" DITCHING BUCKET LIKE NEW CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTH DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2017 KUBOTA KX91-3S2 SUPER SERIES 2 2,800 HOURS ANGLE BLADE 2 SPEED AUTO IDLE NEW 18 INCH DIGGING BUCKET AUX HYD 7,500 LB OPERATING WEIGHT 30 HP ENGINE BEACON LIGHT TRAVEL ALARM NEDS AC BELT VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN NO PAYMENTS FOR 3 MONTHS WITH GOOD CREDIT GRANITEHE.COM

Enclosed cab

MLS Number 12783860 2017 Kubota SVL 95 2-S Skid Steer 1300 hours New tracks Grapple bucket Cab heat and AC Runs perfect

2 Speed Travel Air Conditioner Auxiliary Hydraulics Flow Bucket Combined Hydraulics Heater / Defroster Lighting Radio Regulatory Marking Ultra Low Sulfur Diesel Fuel

2 Speed, A/C, Air Ride Seat, Aux Hydraulics, Cab Enclosure, EH Controls, Hi-Flo, Joystick, Ride Control, Rubber Tracks, Self-Leveling

1 set of 15 inch tracks for a Kubota SVL65-2 track loader. Part# VO211-28521. 380x52x86. They came off a brand new machine.

2008 Kubota M108S Tractor 4120 hours 108 HP New tires and tubes on front Rears are good Nice tractor Woods backhoe available

2012 Kubota L3200 Tractor Under 50 hours Includes 6' bush hog Runs great

2013 KUBOTA M7040DHC TRACTOR 759 ORIGINAL HOURS HEAT AND AC RADIO QUICK RELEASE FRONT BUCKET GOOD GLASS GOOD TIRES VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2023 Kubota Tractor LX2610 SU, Equipped with Grapple Rake Bucket, Bucket, Brush Hog, and Root Rake. Weight: 1,786 lbs Length: 101.8 inches Width: 53.7 inches Height: 88.4 inches Ground clearance: 14.6 inches Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2020 Kubota MX5400 Tractor, Only 500 Hours, Enclosed Cab with Heat and Air Conditioning, Nice Tires, Ready for Work Nice Condition. Weight 3,716 lb Length 127.8 inches Width 69.7 inches Height 95.7 inches Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2021 KUBOTA KX057-4 MINI EXCAVATOR 683 TOTAL HOURS THUMB ANGLE BLADE GOOD TRACKS HI-FLOW GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2020 Kubota KX71-3 Mini Excavator, thumb, 1995 HRS, VERY NICE MACHINE