Equipment For Sale

Automatically feeds, shapes & ejects Rosette blocks in sizes from 5-1/2" - 8" max. square blocks; 3 HP motor belt drives 4-3/4" spindle cutterhead @ 7,500 RPM. -- Operation: Adjustable hopper feed to side of spindle automatically indexes Rosette blocks under cutterhead up against a corner-V holding fixture with overhead spring fingers, cutterhead advances and machines Rosette, then automatically ejects block to front (hydraulic position of block and air eject cylinder). -- Features: Cutterhead equipped for standard 16°/60° corrugated back 1/4" thick knives to be ground at 0° hook angle. -- Produces up to (500) Rosettes/Hr; Rosette profiles can be ground on any profile grinder for infinitely variable design possibilities; table top unit may include base.

Military Dump Truck All Wheel

Army pullout truck, manual trans, hyd brakes, good condition

6x6 Military Truck Automatic Air Brakes Cummings Engine

Military Truck Automatic Air Brakes

23' x 30" x 8" Roll Case w/ Electric Drive

New Never Installed 2007 Mill Tech Precision End Trim Saw; Clam shell Opening P.E.T Trimmer with 2 Banks of Motorized Saws; Right Hand Lumber Line; Each Bank with W/Zero Saw & 3 P.E.T.Saws W/Infeed System; Operates on Skip Lug Basis with Mill Tech; Inches & Centimeters

Miller Dialarc 250 AC/DC Welder

MLS Number 11983452 USNR M6 Millexpert Edger Optimizer Computer System USNR M6 Millexpert computer system for edger. Installed 2010 and took out December 2022. Has one windows 7 analize computer and one data acquisition computer. Seventeen M6 Dynavision scanner heads, an Allen Bradley PLC-5/40E with five 1771 input cards and seven output cards, four 1771 linear positioning cards. Three TT5RBU0240 24” stroke temposonic wands, four 60” stroke TTSRBU0600 wands. Seven Moog model 641F229C valves. Two operator panels.

Milwaukee 8" Panel Saw

Miner Edger 2 saw Laser lghts Good condition

Miner 4” Edger

Miner 3 blade vertical edger, 50 hp electric drive, self-contained hyd unit, includes various spare parts, very good condition

Miner 3-31 STATIONARY Board Edger -- Welded steel frame constructed with 8 inch channel and including legs -- Working height may be determined by buyer, standard is 36" -- Overall length of frame is 16 feet, bay is 31"; wide, maximum board width is 24"; -- Two Live bottom feed rolls and two overhead gravity pressure rolls -- One stationary saw collar and one hand lever shifting saw collar, each with a 12"; diameter carbide saw -- Kohler 30 HP gasoline engine with electric start and including battery and fuel tank -- Belt drive with belt guard -- Infeed and outfeed tables with dead rolls, fixed and movable laser light.

Miner 3-31 STATIONARY Board Edger -- Welded steel frame constructed with 8 inch channel and including legs -- Working height may be determined by buyer, standard is 36" -- Overall length of frame is 16 feet, bay is 31"; wide, maximum board width is 24"; -- Two Live bottom feed rolls and two overhead gravity pressure rolls -- One stationary saw collar and one hand lever shifting saw collar, each with a 12"; diameter carbide saw -- 30 HP electric motor with 480 volt 3 phase magnetic starter included -- Belt drive with belt guard -- Infeed and outfeed tables with dead rolls

Miner B-53 STATIONARY Board Edger -- Welded steel frame constructed with 6 inch channel and including legs -- Working height may be determined by buyer, standard is 36" -- Overall length of frame is 16 feet, bay is 31"; wide, maximum board width is 24"; -- Two Live bottom feed rolls and two overhead gravity pressure rolls -- One stationary saw collar and one hand lever shifting saw collar, each with a 14"; diameter split carbide saw -- 30 HP electric motor mounted on edger -- 480 volt magnetic motor starter -- Belt drive with belt guard -- Infeed and outfeed tables with dead rolls -- Laser lights aligned with each saw

MINNESOTA 24-8 Multi-Spindle Carving Machine.Specifications: -- Spindles/Capacity: (24) Spindles, 8" between centers & 72" length capacity. -- Motors: (12) 0.75 HP motors with (1) motor driving (2) spindles via flat belt. -- Features: Manual table elevation, motorized stock rotation, non-indexable head. -- Comes with: (2) Sets of carving tools (one medium and one fine). -- Includes: Tables for flat carving - to be confirmed (?).

Location: Connecticut 85 KW Mitsubishi genset, 100 gal fuel tank. Call 800-459-2148 for more info

Mixer Direct 304SS Tanks These were installed in a building that has been sold. Except for one tank that was used once, the rest were never put into production. Includes: - (3) 10,000 gal tanks - (3) 15,000 gal tanks with agitators - (2) 1,000 gal high shear mixing tanks with dual motors - (1) Holding tank with agitation (I think this is a 2,000 gal tank with agitator, but I have not gotten up there to look at the tag.

MJ PR-4000 PRIMARY REDUCER Mobile ShredderSpecifications & Features: --The M&J PreShred 4000M is an easily transportable industrial waste shredder used for waste recycling and waste processing applications. It can handle many types of waste from municipal solid waste, industrial and commercial waste to bulky waste. --C15 700 HP Diesel Shredder with Remote --Metal, Wood, Tires Material Reducer to 10 inch --Hydraulic Conveyor and Magnetic Conveyor