Equipment For Sale
10602 Results Found
$ 280,000
2019 Rottne F15D -7500 hours -Tight and dry -Serviced every 500 hours -Two sets of ECO tracks and front chains Ready to work!!!!! Low Hours!!!!!!
Call for Price
2023 HULTDINS SG360S (SN: 027-25226) BLADE 8-WHEEL, 15 TON FORWARDER CAB 710/45-26.5 TIRES
$ 299,000
2019 Rottne F15D 8 Wheel Forwarder, One New Set of Eco-Tracks, One Set of Chains, Espar Heat, Enclosed Cab Heat, Air and Radio, Engine has 7,500 Hours, NO DEF, Good Center Section Tight, Ready For the Woods. Width: 114 in Length: 387 in Transportation height: 150.5 in Service weight: 41,225 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
Call for Price
If you run an industrial business, you likely need numerous pieces of specialized equipment that can be difficult to find in a hurry. Row Electrical Equipment, Inc., stocks a vast inventory of industrial motors, motor starters, transformers, and other electrical equipment that is used in a wide variety of industries. We try to minimize down-time by having available a variety of equipment that is always important in a "need it now" situation.
Call for Price
MOTORS - MOTOR STARTERS - TRANSFORMERS - MISC ELECTRICAL EQUIPMENT - PHASE CONVERTERS
Call for Price
Call for Price
Call for Price
$ 7,250
RYE R 72 2-Spindle Automatic Rotary Copy ShaperSpecifications: -- Cutting circle cap. 24" - 80", Max. square cap. 56", Max. rectangular shape cap. 71" x 35-1/2", & Max. length capacity 50". -- Table size 68" Dia. x 40-1/2" H. -- Table speeds 0.3 - 3 RPM. -- Spindle speed 9,000 RPM. Equipped with: -- (2) 1-1/8"; Dia. High frequency floating spindles, with Frequency changer. -- 6-1/2"; Dia. Center clamp plate.
Call for Price
$ 139,500
S&W Model 700 Sawmill 4500 hours 1600bf per day Capacity 26' long x 52" Heavy duty mill Believed to be a 1994
Call for Price
$ 10,400
SAC - PRIMA K 630, ...Single Head Sander24" Width cap single head. -- Combination sanding head with: 4-3/4" Dia. grooved rubber contact roll & 2" wide polishing platen. -- 7.5 HP Motor; abrasive belt size 25" x 75" with air tensioning & electronic abrasive belt tracking. -- Dual feed speed 15 or 31 FPM; infeed & outfeed rubber-covered holddown rolls. -- 6-1/4" Motorized thickness adjustment by 0.5 HP motor with: LED Readout, and automatic part thickness adjustment; micro switch; 7" dust hood opening. -- Complete with: --: Emergency stop button, motor load meter, and selection of belts.
Call for Price
SAC F 430 430 mm (16.93") Jointer Specifications: Max. depth of cut 8 mm (0.31"), Rabbeting cap. 1/3" x 16". Infeed table size 430 x 1,570 x 860 mm (16.93” x 61.81” x 33.86”) H. Outfeed table size 430 x 1,280 x 860 mm (16.93” x 50.39” x 33.86”) H. Cutterhead speed 5,000 RPM. Equipped with: 120 mm (4.72”) Dia. 4-Knife Nickel-Chromium Molybdenum Steel Cutterhead, with "TERSA" Knives. 3 kW (4HP) Motor, with Brake. 1,200 mm L x 160 mm H (47.24” L x 6.30” H) Aluminum fence, with 0° - 45° Tilt. Swing-away guard. Knife setting gage. Complete with: Spare Knife Set (Needs sharpening).
$ 3,950
SAV S 53 S Single Sided Planer20" Width x 1/8" to 12" opening; 6.6 HP motor, 4-knife 4-3/4" dia. cutterhead rotates @ 5,000 RPM, max. cutting depth 5/16" -- (4) fixed feed speed settings 13 - 23 - 36 - 59 FPM. Equipped with: -- (1) Steel outfeed roller, (2) adjustable bed rollers, sectional infeed roller, sectional chip breaker, manual raise & lower w/mechanical digital readout; -- Table size 41" x 21". Complete with: -- Emergency stop, magnetic starter w/overload protection & 5-1/2" dia. dust hood.
$ 17,500
Complete Operation For Sale: - S. A. Woods Moulder 4 x 8. - Includes all switch gear, large blower and piping, many heads, knives, sharpening equipment. - Cap 150 BF 2 x 6 per minute. - Drop channel siding and tongue and groove set ups. - 2 Top heads, 2 Side heads, 1 Bottom head. - 550 volt, 3 phase. Call 800-459-2148 for more info.
$ 20,000
2 - S A Woods 4 Head Moulders with automatic feeders on both and many upgrades. Original owner and comes with all tooling and extra parts. 1 Moulder is manufactured in 1939 with original blue prints and parts books. The other Moulder is a 1960s model. Both machines were pulled out of service 2 years ago. Both moulder are in working order. There are 20 + heads available and 3 pallets of parts go with the machines. They have been kept indoors. Make an offer! Call 800-459-2148 for more info.
$ 6,490
SAC TS120 Heavy Duty Single Spindle ShaperSpecifications: -- Precision ground cast iron table: 51" x 32 -- Max tool diameter: 250 mm / 9.84" -- Capacity under nut: 6" -- Main motor: 9 HP -- (5) Spindle speeds: 3000 / 4500 / 6000 / 8000/10,000 RPMEquipped with: -- Magnetic controls with overload protection -- Self braking motor -- Guard assembly with -- Fence assembly with micro adjust on outfeed fence -- Miter slot in table -- Interchangeable spindles -- Reverse rotation switch -- Manual raise and lower of spindle by handwheel -- Spindle lock for tool changes -- Mechanical readout for spindle height in handwheel -- Electronic indicator for RPM -- Includes tool box with accessories and wrenches, manualsNote: Machine has a 1600 CFM dust requirement.
SAFETY SPEED MFG 60HA Hot Air Edgebander; Safety Speed Cut now offers a Hot Air Edgebander that is small in price yet big in ability.The NEW "60HA" features: -- Electronic variable speed control -- Digital Electronic temperature control -- Adjustable Heat nozzle that saves energy. -- Electromagnetic end-cutters; no compressed air needed -- Accutrim edge trim system uses industrial duty trim routers to ensure a quality finish. -- Dust collection outlet to keep the part machine and floors clean -- Automatic conveyor for consistent feed rate.....and yes it is "American Made"!
SAFETY SPEED 72GP EDGEBANDER -- Digital P.I.D. Temperature control Glue Pot that reduces overheating and burning of the glue. -- Standby temperature mode for small runs. -- Short 10 - 15 Min heat up time -- Digital Electronic temperature control. -- Adjustable Heat nozzle that saves energy. -- Electromagnetic guillotine end-trim means no compressed air needed. -- Accutrim edge trim system uses industrial duty trim routers to ensure a quality finish. -- Dust collection outlet to keep the part machine and floors clean. -- Automatic conveyor for consistent feed rate -- American Made.