Equipment For Sale

SNX nVISION System2 G2 CONTOUR EDGEBANDER + Optional Dual Telescoping Arms for simultaneous Contour Banding & Trimming: -- Specifications: Curved (Contour) Edgebander to allow 360° edgebanding to contoured (shaped) panels.Edgebanding is applied automatically as part is advanced past the edgebanding workstations via turntable.Reduced learning curve/expertise for operation as operator simply loads part to vacuum turntable, then activates the edgebanding cycle. -- Working Capacity: The nVision Contour Bander can band a minimum material size of 150 mm (6") diameter.Maximum material size 2,400 x 2,400 mm (94" x 94"); Maximum material weight up to 104.5 KG (230 LBS).Material thickness from 10 - 60 mm (0.4" - 2.36"); Banding thickness from 0.5 mm thin tape w/low temp adhesive - 3mm tape. -- Radii Capacity:Minimum Internal (inside) radius 80 mm (3.14"); minimum external (outside) radius 30 mm (1'18") based on 1 mm thick edge tape. &#9679 Edgebanding thickness 1 mm, min = R 30 mm &#9679 Edge thickness 2 mm, min = R 50 mm &#9679 Edge thickness 3 mm, min = R 80 mm &#9679 Panel thickness 10-60 mm with edge thickness 1 mm &#9679 Panel thickness 10-60 mm with edge thickness 2 mm &#9679 Panel thickness 10-45 mm with edge thickness 3 mmIMPORTANT: ALL minimum & maximum radii are affected by tape thickness, quality of adhesive and edgebanding being applied. Radius size dramatically affected by adhesive temperature and quality of edge tape, semi or rigid. -- Equipped with:(1) Thermal-regulated glue pot heated via (2) 800-Watt heating elements with electronic temperature controls; holds up to 1 KG (2.2 LBS) of granules. (2) Pressure rollers to copy the shape of the piece, automatic guillotine for coiled material up to 3 mm (0.11") thickness & 57 mm height (0.125" - 2.25"). -- Features: TRIAX 3-AXIS Laser System (patented) for tighter butt joints & easy length identification with closed parts without the need for additional length measurement.The Laser also detects a tight radius and will automatically slow the speed + resume the set speed when the detected radius has passed.The machine is also equipped with the foot pedal for manual control/intervention. Motorized turntable for automated edgebanding application to large panels.(2) "Heavy Duty" Articulating arms to support the parts during edgebanding and trimming. Arm has a large inter-changeable vacuum pod to secure panels during edging and trimming.NOTE: Panels can be irregular in shape but must conform to the min. tolerances of inner & outer radii and fit within the work area. -- Complete with: &#9679 Top & Bottom Trimming unit &#9679 Centralized control panel with Simple PLC Touchscreen Interface with individual controls for all stations to enable manual feeding of panels if desired &#9679 Banding station &#9679 Edgeband coil stand &#9679 Standard-size vacuum pod for articulated arm &#9679 80 mm dia. (3") dust extraction outlet &#9679 Foot pedal activation/de-activation control &#9679 Larger feed roller

SNX - Coil Hub, ...Edgebanding Heater & Storage System: For straight-line and contour Edgebanders - Keeps banding at the perfect temperature. - Softens banding, making it more pliable. - Keeps banding at the perfect temperature. - Softens banding, making it more pliable. - Increases adhesion. - Decreases delamination issues. - Allows a cleaner guillotine cut. - Lessens the chance of chipping when trimming. This "CoilHub" also keeps the coils contamination-free, keeps the edgebanding easily accessible right at the machine, and can store up to (20) coils.

Soderhamn 48" Chipper M671 Diesel Engine Mounted on trailer

Soderhamn 48" 3 Knife Stationary chipper S/N 616

Soderham Chip Pack 48"

84" Veneer Chipper w/ Feed Box was running when removed

48" SODERHAMN/PRECISION chipper. HFVD; 6 knife; standard 14 3/4" knife length; pockets in good condition; 12" round discharge; 3 fan blades; 11" round wood capacity x 26" diagonal length.

Soderhamn S/N 030031 150HP Electric Motor

Logging Forwarder Started out as a Soderhamm Prentice Series 50 Hydraulic Loader Rotobec Grapple Model 4642HD Ford BSD 666 Diesel Motor 6 Cylinder Franklin 240 Axles T88 Transfer Case AG430 Transmission Comes with 28.6 or 66x43x26 Flotation Tires Runs and Operates Great

58" Large Mouth Soderhamn Chipper 6K w/ Andritz Turnknife disposable knife system. Includes motor, common base, & guards. This unit is ready to ship & go to work.

84" Soderhamn Veneer Feed Box Assembly

SODERHAMN 5' X 5' rotary screen with drive and screen plates. Offered as-is-/ where-is but loaded on your truck.

Soderhamn 48" 4 Knife Wood Chipper w/ 100hp Motor s/n: 735

30" dia Cambio ring debarker, 6 arms, steel infeed press wheels, all electric, all electrical and controls included, recently in production and in good working condition, infeed/ outfeed also available, call for price

2009 Soderhamn Ericksson Cambio 71-45 AIR-TEN, CAMBIO 71-45 AIR-TEN DEBARKER, SECOND HAND, Debarker for logs. For clean and gentle debarking. - Technical data Rotor opening: 450 mm - Min. log diameter: 65 mm - Min. log length: 2.5 m - Rotor speed and feed speed: 410 rpm, 75 m/min - Feedwork motor: 7.8/5.7 kW at 1460/985 rpm - Rotor motor: 37 kW at 1470 rpm - Weight net: 3,150 kg - Dynamic load: 48,000N. Call 800-459-2148 for more info.

SORBINI TM/95-2F Flow Coater Specifications: -- 24" Coating width, 4" max. thickness, hand crank controls curtain thickness, (1) head gravity feed. -- 2 HP feed motor for variable feed speed from 90 - 350 FPM, (1) 1.5 HP circulating pumps, (1) stainless steel tank & return reservoir. -- Conveyor: 24" Wide, 60" Long at infeed, 72" long at outfeed. 34" long center belt.

SORBINI MR1TFF26420 Single Head Differential Roll Coater;SORBINI Single head differential Roll Coater, 51" width cap., all functions PLC controlled.Specifications: -- (1) 9.8" Dia. applicator roll. -- (1) 6.8" Dia. hard chromed doctor rolls. -- Chromed wiper blades with precision control on applicator & doctor rolls. -- 1 HP Motor with AC inverter control on applicator rolls, 0.5 HP motor with AC inverter, speed control on all rolls. -- 3-15/16" Part thickness opening with dial indicator readouts mounted in both hand wheels, "quick change" feature of applicator rolls. -- Variable conveyor feed speed from 20 - 80 FPM, 1 HP AC inverted control for speed control. -- Complete with: Fluid pump with automatic low level fill, return trough.

Southern Vac LLC 8 Ton Vacuum Tank Trailer VIN #4S9V6TA24CG270016

New Tires Everything Works on this trailer LED lights on back

2022 Southstar 605, 4000 hours, completely gone through, CALL