Equipment For Sale
10596 Results Found
Call for Price
GLOBAL BAGGER SYSTEMSpecifications: -- Support Structure 2" Tubular Steel -- Height 86 Inches -- Length 12 Feet -- Width top 60" and 90" Base -- Total Weight 1900 Lbs approx. -- Hopper Width 60" -- Hopper Length 106" -- Hopper Depth 44 " -- Capacity 3 Cu.Yards -- Hopper Conveyor Length 146 " -- Hopper Conveyor Width 25" -- Rubber Conveyor Belt 18" Wide -- Bag Clamp Air Operated -- Heat Sealer 24" capacity -- Bagging Capacity up to (200) Bags per HourOptions available, but not included; -- Weight Measure Scale -- Air Compressor -- Bag Stitching Machine -- One Year Warranty -- Loaded on your Truck
Call for Price
Globe 5 head panel trim saw 5 powered adjustable heads, Lug chain feed air cylinders to raise or drop saw heads Approximate panel capacity: 8 feet WIDE X 26ft LONG Prior used of saw was cutting large full size sheets (8ft+ x 26ft+?) at a particle board manufacturer- directly after sheets came out of the press. Saw has been removed in one piece to reduce reinstallation time & cost- contact us for a delivered price to your location. Stored inside our warehouse Lugs on chains have micro adjustment bolt ( brass) Brands of chain: Woodward & White Contact us for additional details, photos and measurements Approximate shipping information: Overall width: 14 ft. 6inches Overall height: 6 ft. Overall length: 33 ft. 4 inches+- Price includes loading. contact us for a delivered price to your location.
$ 35,000
MLS Number 10689968 Globe 5 Head Panel Trim Saw Approximate panel capacity: 8 feet wide X 26ft long Saw was cutting large full size sheets (8ft+ x 26ft) at a particle board manufacturer Lugs on chains have micro adjustment bolt ( brass) Air cylinders raise and drop heads Brands of chain: Woodward & White Overall width: 14 ft. 6inches Overall height: 6 ft. Overall length: 33 ft. 4 inches+-
Call for Price
$ 15,000
587 hr. 5.43CI per REV, 2900 RPM, 5000 PSI sn# 6A168752RC, In working condition . Call for more info 315- 257-0175
$ 27,500
1993 Chevrolet Top Kick Truck with Cat motor. Only 161,000 miles. Allison Transmission, Prentice grapple behind cab. Double framed. 23-500 rear. All tires 100%. Truck had an original dump bod, so the truck can use a dump body or a log body. Nice Truck. Owner Retiring.
$ 49,995
2004 GMC C4500 Duramax diesel 146k miles Airbag suspension New injectors New fuel pumps 11R22.5 tires BW gooseneck hitch Stereo system Road ready Two trailers available
$ 25,000
1993 GM with Prentice 180d Loader -8.2l engine with automatic transmission -6059 JD engine in loader (3000 hours) -Road worthy -Turntable tight and dry -60 inch Siro Saw Table
$ 8,500
Call for Price
RM6x6 Master resaw with return | Salve head RS 6 x 8, second head | Year 1/30/2021 | Serial Number N/A. | Voltage Single Phase | Capacity 1/4 to 6" tall Cut Height, 8" Wide, Unlimited length cut
Call for Price
New 2024 UpSTAK Board Stacker machine for sale. Includes unscrambler, 7.5HP Motor, 15 layers per minute package, 7' Outfeed, and HMI controls. Wired for 480V. READY TO SHIP. CLICK ON VIDEO TO SEE MACHINE UP CLOSE.
The Go Fast Firewood Wrapper is the only industrial duty firewood wrapper available on the market today. This machine can wrap a bundle in under 12 seconds, making it the perfect solution for banding firewood bundles. The wrap is tensioned by a standard nut that ensures tight bundles and maximum wrap usage. Our firewood wrappers are simply better by design and unlike other manufacturers, we use high speed farm duty motors along with lubed bathed gear boxes. This allows us to get a higher amount of torque from our energy efficient 1/3HP motor. These components have proven themselves to outlast the light-duty, low speed motors that are commonly found on other firewood wrappers.
Call for Price
NXL-M Single Head Notcher. 20HP motor, can notch 4 stringers at a time. Notches new or recycled material. Equipped with a pop-up guard. Table floats on linear bearings and takes minimal effort for the operator to move.
$ 6,000
Call for Price
The Go Fast Deduster is the solution to sawdust left on boards. Material can be fed by hand or from an inline process into the machines hopper. An adjustable gate allows the rubber feed belt to pull the bottom board forward to the feed wheel and through the top and bottom rotating brushes. THE DIFFERENCE: There are several features that set the Go Fast DeDuster apart from the rest, and it all starts with the brush! Our side sweeping disc brushes sweep sideways, providing cleaner boards than traditional drum brushes. They also do not require an air collection. BOARD KNOCKER: Our famous board knocker system helps meter the boards through the machine one at a time. It breaks frozen and sticky boards apart and prevents 99% of jams!
Call for Price
The Go Fast NXL Single Head Notcher is a compact, heavy duty, and SAFE machine for your notching needs. Notch new or recycled material or even 6” wide cants. A dual hand control check valve requires that the operator has both hands on the push buttons while the table is moving through the cutter. The cutter head is well guarded and never exposed to the operator. In addition to a front clamp, a top clamp is included to help hold the material down while it is being notched. Unfortunately many other notchers do not include this feature which results in you replacing more cutter tips and spending more money.
Call for Price
Call for Price
Go Fast 5-Head Resaw Unit was cut into two pieces and can be put back together with a weld in the middle. Approx layout is 31' x 8'
PRICE REDUCED 6x6 Master Return Resaw - ¼” – 6” Tall Cut Height, 6” Wide, Unlimited Length Capacity - 4” Dust Connection (No dust collector required) - Heavy Duty 2-7/16” Blade Arbors and Bearings - 20” Band Wheels - Air Tensioned Blade Mechanism - Powered Belt Return w/ Adjustable Height Sheer Plate - Top Mounted Powered Tire Hold Down Wheel - Self- contained Hydraulic System: Adjustable Infeed Speed (0-150 ft/ min) - Easy Crank for Adjustable Blade Position - 3” Right Side Fences - Feed Belt Height: 34” -Dimensions: 132” L, 96” W, 53” H - Approx. Weight: 1840 lbs 6x8 Slave Resaw - ¼” – 6” Tall Cut Height, 8” Wide, Unlimited Length Capacity - 4” Dust Connection (No dust collector required) - Heavy Duty 2-7/16” Blade Arbors and Bearings - 20” Band Wheels - Air Tensioned Blade Mechanism - Self- contained Hydraulic System Runs off First Saw - Easy Crank for Adjustable Blade Position - Top Mounted Powered Tire Hold Down Wheel - 3” Right Side Fences - Feed Belt Height: 34” -Dimensions: 60” L, 90” W, 48” H - Approx. Weight: 1340 lbs Additional options included: -Air holdover -6” fence -1.25” blade and guides - (2) 15 HP Motors (230/480/3/60 TEFC) 2 HEAD Resaw Control Panel - 480V Line Voltage Location: Salem, MO