Equipment For Sale
10582 Results Found
DOES NOT HAVE HYDRAULIC CONNECTING LINES ON ATTACHMENT END JRB 962K HYDRAULIC COUPLER SOLD AS IS WORKS FROM MACHINE SIDE 962 TO JRB 416 ATTACHMENTS WORKS FROM MACHINE SIDE CATERPILLAR 962 TO JRB 416 ATTACHMENTS WORKS FROM MACHINE SIDE CATERPILLAR 962 TO JRB 418 ATTACHMENTS
Call for Price
JV MANUFACTURING HE-60 BIG MOUTH Closed-Door Horizontal BalerSpecifications: -- Cylinders: (2) 6" -- Main motor: 20 HP -- Bale size: 60"; x 30"; x 48"; -- Cycle Time (No Load) – 47 seconds -- Platen Force – 120,600 lbs normal - 140,800 lbs max -- Hydraulic Cylinder Bore Diameter: 8"; -- Hydraulic Cylinder Stroke: 84"; Equipped with: -- Conveyor hopper -- Heavy duty operator controlsNote: back cover is included.
Call for Price
JV MANUFACTURING MODEL CC-02, ...Stationary CompactorSpecifications: -- Charge box capacity: 2 Cu/Yards -- Clear Top opening: 40"x 58 1/2" -- Average cycle time: 63 Sec -- Total normal force: 56,500 Lbs -- Max. total force: 67,900Lbs -- Normal ram pressure: 33 PSI -- Max. ram pressure: 39.7 PSIEquipped with: -- Standard 3-button controls -- Heavy-Duty structural steel components and welded by AWS Certified Welding TechniciansDesigned for: ● Retailers ● Hospitals ● Hotels ● Distribution Centers ● Manufacturing Centers ● Recycling Centers ● Home Centers
Call for Price
JV MANUFACTURING - VB-72B, ...Vertical Hydraulic BalerSpecifications: -- Bail size: 72" W x 30" D x 48" H -- Bale weight (up to): 1,200 Lbs -- Cylinder: 6" -- Cylinder stroke: 44" -- Feed opening height: 24" -- Load height: 52" -- Main motor: 10 HP -- Platen force: 59,370 Lbs -- Average cycle time: 57 Sec
Call for Price
JV MANUFACTURING SC-T2-34 Self-Contained Compactor with Cart TipperSpecifications: -- Feed opening: 58" x 41" -- Cylinder: (2) 4" -- Main motor: 10 HP -- Capacity: 34 yd.Equipped with: -- Rear hydraulic Cart Tipper -- Universal rails
JV MANUFACTURING - HE-60 BIG MOUTH, ...Closed-Door Horizontal BalerSpecifications: -- Cylinders: (2) 6" -- Main motor: 20 HP -- Bale size: 60"; x 30"; x 48"; -- Feed opening: 18,000 LbsEquipped with: -- Conveyor hopper -- Factory infeed conveyor -- Full penRefurbished work. New: Guides, press head cover, main door hinge pin, main door patch pin, oil & filters, hoses as required, seals in control manifold, belt on conveyor, drive chain, and sprockets on conveyor.Rebuilt: Cylinders, door latch cylinder, shear blades sharpened and adjusted. - Gear oil changed in conveyor drive.
Call for Price
JV MANUFACTURING - PH-04, ...Pre-Crusher CompactorSpecifications: -- Hydraulic Cylinder: 7" -- Charge Box Capacity: 4 Cu.yd -- Cycle Time: 56 Sec -- Total Force: 77,000 Lbs -- Ram Face Dimensions: 60" x 35" -- Motor: 20 HPEquipped with: -- Rear Deck
(2) JV MANUFACTURING - VB-60-B & VB-72-B, ...Vertical Balers Lot: (2) Vertical Balers in great working condition!Specifications: -- Cylinder: 6" -- Main motor: 10 HPEquipped with: -- ANSI Z245.5 Compliant -- Key operated controls -- Quiet operating Vane Pump -- Gas spring assisted Loading Door
Call for Price
JWC ENVIRONMENTAL Muffin Monster 3-Shred-H-800 Shredder/GrinderSpecifications: -- Model #: 3-Shred-H-800 - Stainless Steel -- Used only two times -- Stainless steel construction -- Alloy steel drive shafts and scrapers -- Cartridge-style tungsten carbide mechanical seals -- Mill opening:Length: 7 inches Width: 9 inches -- 5 HP motor -- Electrical:230 V 60 Hz Phase 3
Like NEW heavy duty package deck. 40' OAL, 3 strands, WR132 chain. 194:1 x 25 HP drive. Heavy 8" x 31# H beam runners. Run less than one year. Strands can be spaced as needed or shortened or made into 4 strands by mill.
Call for Price
Call for Price
Call for Price
KAESER - ASD 40 T, ...40 HP Rotary Screw Air Compressor, with Integrated Dryer & 17,702 Run & 3,775 Load Hrs (as of 2/16/24)Specifications: -- Rated capacity: 191 CFM. -- Max. pressure: 125 PSIG. Equipped with: -- 40 HP - 3,570 RPM TEFC Direct drive motor; IE3 (Premium Efficiency). -- "SIGMA PROFILE" Air end. -- 1:1 Motor-air end coupling. -- Wye-Delta reduced voltage magnetic starter. -- Electronic Thermo-Management (ETM) system. -- 2-Stage 4 micron air intake filter with Cyclone pre-separation & replaceable element. -- Safety pressure relief valve. -- Anti-vibration mounts. -- Sound enclosure. -- KAESER "SIGMA CONTROL 2" PC-Based controller with LCD Display & Touchpad.Complete with: -- Integrated Refrigerated Dryer. -- Compressor Operator Manual & Controller User Manual.Dimensions for this Specific Machine: 70" x 36" x 61" H.Weight for this Specific Machine: 750 kG (1,650 Lbs).
Call for Price
This mill will be refurbished before it is shipped out. Can be configured for any application. Pellet Mill Line: Refurbished Model 39-1000 Including: - - Conditioner - - Feeder - - Drive - - Outlet box - - Discharge device - - Knife assembly - - 250 HP motor - - Hydraulic System - - Complete Roller Head - - MCC complete with starters - - PLC complete with programming - - Used Die 6mm - - Steel pellet mill base
Call for Price
This system is part of a project that never took off. The machines are new, never installed: - (6) Kahl 39-1000 Pellet Mills - 200 kW (268 HP) Motors: Two are wired at 460v, four at 575v. The other 4 can be rewound for a fee. Manufacturer specs (to be confirmed): Equipment List 6 Pelleting press type flat die 39-1000 Consisting of: 575V, 60 Hz 110 V AC 24 V DC - Divided cast iron case provided with cooling fins in the gear zone - Venting port in pellet mill middle part - Dust and inlet hood with product distributor and a venting port - Main shaft with thrust and radial bearings - Pan grinder head with scrapers and pan grinder rollers made of flame hardened steel - Temperature measuring of the die - Spring assembly, stainless steel - Spacer rings - Discharge unit with special scrapers - Worm gear turning in oil bath, worm wheel made of special bronze, hardened worm - shaft - Fan pulley - Oil pump to lubricate the main bearings, with oil filter, pressure device and thermometer 6 Three phase induction motor For the drive - Voltage: 575V - Motor power: 200 kW at 1,800 RPM - Drive shaft 90x170mm - Protection class: IP65, motor type B3 - Bearing suitable for 18 kN @ x=136mm - Stainless steel nuts and bolts - 12 tension rails • Two pieces per motor 6 Drive accessories for the pelleting press Consisting of: - V-belt pulley - V-belts - V-belt guard, steel construction, lateral walls with special air guiding plates, - indispensable for pelleting press cooling - 6 Roller gap control, type Distamat - For continuous adjustment of the roller head via the hydraulic nut Consisting of: - Hydraulic system for the press - Valve control - Electronic elements for transforming the measuring signals - Output: 4 – 20 mA = 0-5 mm - 6 Central slip ring seal air cleaning - For protection of the pan grinder roller slip ring seals during operation of the press Consisting of: - Air distribution with piping and coupling - Hose with central air connection to the pressed air 6 Oil coolers for the press Designed as oil-to-air heat exchanger Consisting of: - Oil-to-air heat exchanger - Oil pump - Hose connections - Temperature controller - 6 Press outlet box 39-1000 - Stainless steel design Equipped with: - Reversing flap - Inspection opening - Control socket - Aspiration connection, venting port - Pile up indicator - 1 Spare roller head for the 39-1000 - Spare, for easy and quick exchange of the roller head - 6 Automatic press control, type EAPR - Allen Bradley - For automation of pelleting line - Enclosed design, wired ready for connection according to IP 65 Consisting of: - Control and monitoring of all drives and units belonging to the line - Load dependent control of the pelleting press - Min/Max current monitoring of the pelleting press - Slippage monitoring of the pelleting press - Throughput control (t/h) - Visualization of the line on a graphic operator panel - Preselection of the process parameters at the OP - Fault and alarm messages at the OP - Start/s
$ 44,900
MLS Number 11249978 2007 Kalmar Ottawa 4x2 Yard Spotter Truck 7108 miles 3204 hours 200 HP Cummins Allison automatic 11R22.5 tires
$ 45,000
KALMAR MODEL KLMV42-1200 Container LoaderSpecifications: --95,595 LB capacity @ 48" Load Center. Rebuilt Cummins L10 Diesel engine (32,462 hours) and transmission, Spreader and hydraulics rebuilt. -- 394" lift, full cab, air brakes. -- Sideshift, tilt and fork adjustments, 5 valves. -- Toplift 20' - 40' Spreader w/ 77,162 lb capacity. -- 125,443 lb. Operating capacity.
unused-new, bulk bags, super sacks, bulk totes, FIBC- flexible intermediate bulk container, New-unused-still packaged on original packaging pallets ( bags were manufactured in October 2011 - were stored in warehouse and still stored inside), 35"x 35"x 25" S/S, weight capacity: 2,200 LBS. SWL (1000KGS) safety factor 5:1, single trip FIBC, factory bag drawing is available in photos or upon request, we have approximately 31,000 bulk bags available, bags are packaged 130 bags per pallet- (MINIMUM ORDER IS ONE PALLET: 130 bags at $3.46 each = $449.80 per pallet and will be sold in pallet quantities) , the bag information tags are labeled with the original sellers name: K.C.B. Kansas City Bag Company, document pouch, top filling spout 14” diameter and 19” long, bottom discharge chute 14” diameter and 19” long- with tabbed gusseted liner , liner, reduced price for purchasing large quantities, bags are stored inside on their original pallets with the original covers strapped to the pallets, ocean container loading available - 5200+ bags fit in a 40 ft container, bags are at our location close to ports, Call for pricing and a freight quote or with any questions. Free samples are available upon request - shipped via UPS ground, used semi-automatic bag filling machines with weight check are available- can be used to fill these bags, nationwide deliver is available, call David @360.864.2800 with any questions or for additional photos or delivered prices to your location nationwide or overseas. Estimated freight cost to northern California is 25 cents per bag in truck load quantities, estimated freight cost to southern California is 35 cents per bag in truck load quantities,
$ 18,500
Kason 72" Shaker Screener Model K72-1-SS Single Deck 2 HP Mounted on 36" Steel Base Came out Running