Equipment For Sale

Track System Replacement Rollers. BERCO NEW rollers! And all the parts, pins etc. see photos. There are 18 rollers. Call 800-459-2148 for more info.

(3) 60HP Motors (1) 75HP Motor with Large Hydraulic Holding Tank

20HP HYDRAULIC UNIT

Bertheson Press Platform size 51 Wide X 102 Long with 2 16 ft shuttle driven aluminum runner platforms. Pressure 2500 psi and we ran a temperature of 350 degrees for Tego and 165 degrees for plywood. The Press can laminate Tego Film glue or pva c glue. This press is a double shuttle and can laminate up to 14 ft by double pressing on shuttle. We can get the press operational if you are interested. We only have to hook up the power. Very good condition!

YM-800 1 YARD 4 OR 5 TINE Orange Peel GrappleSpecifications: -- Operating Weight 2,400lbs -- Opening Width 71 1/8" -- 4 or 5 Tine in stock - Ready to ship -- Rotating -- Hanger for Extra Cost

BIESSE AKRON 855 EDGEBANDER (W/PRE-MILL & CORNER ROUNDING):Specifications: -- Edge & Workpiece Capacity: 0.4 -15 mm (0.016" - 0.59"), Edge thickness, 14 - 65 mm (0.55" - 2.56"), Edge height, 10 - 60 mm (0.39" - 2.36"), Panel thickness:140 mm (5-1/2") Min. panel length, 85 mm (3.3") Min. panel width.Infeed Section: -- Pre-Milling Unit, "FI-701 Rectifies face to be edged before applying glue, Horizontal & vertical movement of (2) motors on linear guides, Independent automatic temporized intervention of (2) 1.8 kW (2-1/2 HP) 12,000 RPM Motors, Independent copying pads on each unit, Auto-set device to ensure optimum positioning of cutters according to the thickness of panel being machined. -- Edge Feeding, Gluing & Pressing Unit, "VC-710": with Automatic edge magazine for strip & coil stock, 3 mm (0.04") PVC Guillotine, "TEKNO-GLUE" System Includes: Pre-Melt, "QM-701", For quick heating & tank changing with floating & bidirectional glue roller applicator, and NC axis idle presser roller movement device. -- Pressure Section: (1) Large driven & (5) Idle rollers, Independent pneumatic pressure control, Programmable servo motor for quick edge thickness changeover, Feed speeds 10, 14 & 20 MPM (33, 46 & 65 FPM).Workstations: -- End (Edge) Trimming Unit, "IN-701-V": (2) 0.35 kW (1/2 HP) 12,000 RPM Motors, Automatic 4-position programmable chamfer from control panel (0°, 3.6°, 11°, 15°), Sliding in slicing motion on 45° precision guide bar with oversized bearing blocks. -- Superimposed Flush (Double Edge) Trimming Unit: "RS-701": Top & bottom, (2) 0.8 kW (1 HP) 12,000 RPM Motors with Superimposed motor position, 1° Tilt capability. Includes: Pneumatic exclusion device & Pneumatic top/bottom motor positioner. -- Tilting Top & Bottom Trimming Unit, "RI-701": (2) 0.65 kW (0.87 HP) 12,000 RPM Motors, For radius top & bottom fine trimming, Unit can be tilted 0° - 45°. Includes: NC axis multiple machining device. -- Corner Rounding Unit, "CR-200V": For corner rounding, top & bottom trimming on panel edge with synthetic material & wood edgebanding up to 5 mm (0.20") Maximum edge thickness. -- Edge Scraping Unit, "RB-701": For finishing rounded-off edges in PVC or ABS up to 5 mm (.20")thickness; Includes: Pneumatic unit lifter. -- Flat (Glue) Scraper, "RCC-700":Top & Bottom, removes potential excess glue before buffing unit. -- Buffing Unit, "SPL-700": Top & bottom. -- Hot Air Blower Unit, "PH-700", (2) STEINEL "2346" 2,000 W, Reactivates color of thick plastic.Complete with: -- PC-based control panel with 15" Color LCD monitor, HF (High-frequency motors on all cutting & trimming workstations. --Top pressure beam programmable via positioning motor, Top pressure provided by belt hold-down. -- 36" Diameter Coil table, Padded sound enclosure. -- Manuals (as pictured). -- Dimensions: 280" x 42" x 72" H. Weight: 3500 kG (7,750 Lbs).

BIESSE SKIPPER V31 CNC MACHINING CENTER (VERTICAL): -- Specifications:Flexible "Vertical" Machining Center that can reach movement speeds of 164 FPM (50 MPM) in "X" & "Y" axis & 50 FPM (15 MPM) in "Z" axis with total safety. -- Max. workable part size: "X" axis is 98.4" (2,500 mm), "Y" axis 35.4" (900 mm), max. part thickness 2.75" (70 mm). -- Min workable part size: "X" axis is 7.8" (200 mm), "Y" axis 2.7" (70 mm), min. part thickness of .39" (10 mm). -- Boring unit:(1) Boring block with "QUICK CHANGE" spindle system, 4.2 HP (3 kW), variable speed from 1,500 - 7,500 RPM, (10) vertical spindles (5) spindles in "X" axis & (5) spindles in "Y" axis;(6) Horizontal spindles with (2+2) horizontal spindles in "X" axis & (1+1) horizontal spindle in "Y" axis;(1) "X" axis grooving saw; 9,000 RPM, 120 mm saw blade dia. -- Machining unit:(1) 6 HP (4.5 kW) Electro spindle router with ISO 30 adaptor, variable speed from 1,000 - 20,000 RPM;ISO 30 "QUICK CHANGE" push button tool change system. -- Operator & Machine Control:Biesse XP 600 + "BiesseWORKS Advanced" operating system.19" TFT monitor; international keyboard, soft-touch keypad & industrial mouse;RS-232 Serial ports, USB ports; (1) CD ROM drive, modem. Ethernet connection. Real-time multitask processing; programs can be transferred via diskette or downloaded by wire. -- Complete with:Pneumatic part clamping devices; sound enclosure; Lateral grid protection & safety mats; forced Auto Lubrication; Air conditioned control cabinet. -- Actual Model is BIESSE SKIPPER V31

BIESSE ROVER 20 CNC MACHINING CENTER (W/ATC/BORING):Specifications: -- Working capacity: X-Axis 2,885 mm (113.58"), Y-Axis 898 mm (35.35") for Boring & 950 mm (37.40") for Routing, Max. panel thickness 65 mm (2.56"). -- Positioning speed: X-Axis 75 MPM (246 FPM), Y-Axis 45 MPM (147 FPM), & Z-Axis 15 MPM (49 FPM).Equipped with: -- Work area, with (2) Working zones, (6) Manually-positioned & Pneumatically-locked panel supports, Each with (2) 6"; x 6-1/4"; Vacuum pods, (6) Backstops/clamps, Left & Right Side stops, All Pneumatic, raised & lowered automatically by start/stop of machining cycle. -- High precision prismatic guides & Ground helical rack on X-Axis, Hardened ground ball screws on Y & Z-Axes. -- Boring unit: 1.7 kW (2.3 HP) - 5,135 RPM Motor, Spindle speed 4,000 RPM, (10) Vertical independently-operated spindles with (6) in X-Axis & (4) in Y-Axis, (6) Horizontal spindles with (2+2) in X-Axis & (1+1) in Y-Axis, (1) Grooving saw in X-Axis with 120 mm (4.72") Dia. Blade & Blade speed 5,200 RPM. -- Machining: HSD "ES 919A" 6.6 kW (8.9 HP) Air-cooled electro-spindle, with ISO 30 Adapter, RH & LH rotation, Spindle speeds 1,000 - 24,000 RPM, 4-Position Side-mounted automatic tool changer magazine, & 3-Position Rear-mounted on-the-fly Automatic tool changer. -- Control: PC Front-end with 15" Color display, Pendant control, & (2) Foot pedal controls.Complete with: -- BECKER "PICCHIO 2200" 3 kW (4 HP) 130 mbar Vacuum Pump.Control dimensions: 60" x 36" x 77" H.Vacuum pump dimensions: 28 x 14 x 24 H.

BIESSE ROVER A 1532 CNC MACHINING CENTER (4-AXIS): -- Specifications:Working Field "X" axis 123.6" (3,140 mm), "Y" axis 61.4" (1,560 mm), "Z" axis stroke 15" (383 mm), max. material thickness 9.6" (245 mm). -- Positioning speed: "X" Axis 262 FPM (80 MPM), "Y" axis (60 MPM), "Z" axis 65 FPM (20 MPM). -- Work Table:(6) NC controlled "EPS" Adjustable panel supports with (4) lifting bars for heavy panels, (4) vacuum pods per panel support.(2) Independent working areas with (6) pneumatic back stops, (2) pneumatic side stops & (2) pneumatic central stops. -- Boring Unit:"BH 29" Boring unit with 4 HP (3 kW) motor with variable speed from 2,800 - 6,000 RPM; (19) Independent vertical spindles with (12) spindles in "X" axis & (7) spindles in "Y" axis;(25) Total ATC positions with (1) 13-position ATC tool plate located at the back of the machine base & (1) 12-position ATC rack mounted on the base of the machine frame.(10) Horizontal boring spindles with (3+3) in "X" axis & (2+2) in "Y" axis; (1) "X" axis grooving saw for 120 mm dia. blade. -- Machining: -- Router(1) 17.4 HP (13 kW) Liquid Cooled, electro-spindle router with HSK F63 adaptor, variable speed from 3,000 - 24,000 RPM. Pre-wired for C Axis -- Saws(2) Grooving saw with 120 mm blase (1) in X axis and (1) in Y axis -- Operator & Machine Control:PC Front End with Biesse "BH 660" + "BiesseWORKS" + WINDOWS "7" operating system, 21" color CRT, full keyboard, mouse, 1.44MB & CD ROM disk drives,RS 232 & USB ports, Ethernet connection, specific function controls & and internet trouble shooting capabilities; air conditioning & dust free environment."BiesseWORKS" is a multitask operating system, input/output modules, axes override, 5-axes interpolation, diagnostic graphics aid for programming, machine data & tool management." Bsolid" Software included -- Complete with:(1) 300 m³/Hr Vacuum pump; hand-held remote-control pendant; safety light barrier system; scrap conveyor; original documentation; user & maintenance manuals, wiring diagrams and operation of Numerical Control.Automatic chips removal conveyor -- Actual Model is BIESSE ROVER A 1532Note: This machine has only 39 hours on the clock

Biesse Cosmo Case Clamp Bought new, never used

Biesse Rover C 9.65 CNC Router Vacuum Pumps Still under power for inspection

BIESSE AKRON 1330 EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): -- Specifications: Computer controlled interface for workstations with servos and pneumatic positioning devices. Programmable selections for 1-touch changeover between edgebanding types and thicknesses.Top Pressure Beam with automatic adjustment from the machine control. -- Working Capacity: Edgebanding thickness, 0.4 - 5 mm capacity. Min. panel width 85 mm (3.3"); min. panel length 140 mm (5.5"); panel thickness 10 - 50 mm (0.39" - 1.96").3 HP (2.2 kW) Variable Feed Speed from 10 - 20 MPM (32 - 65 FPM).Front-End Equipped With: -- Premilling Unit with "Autoset" automatic intervention, Strip & Coil Edge magazine, automatic shear type guillotine. -- Hot-Melt Glue System: Teflon coated glue pot, digital thermostats with automatic kick-down when machine is in idle mode.Pressure Section with (1) large dia. "non-stick" coated drive roller & (5) Teflon plated idle rollers with servo positioning NC controlled material thickness adjustment.Workstations: -- End Trimming Unit:NC controlled end trimming unit, 0.33 HP (0.24 kW) - 12,000 RPM motors;Motors travel on (2) straight slides and pneumatic tilt 0° - 15° on horizontal. plane -- Top & Bottom Multi- Function Flush/Bevel/Radius Trimming Unit: NC Controlled 2-motor Top & Bottom Multi- Function Flush/Bevel/Radius Trimming Unit, 0.3 HP (0.24 kW) - 12,000 RPM.Servo driven positioning of motors for different edge trimming profiles & positions. -- Corner Rounding Unit:2-motor 0.3 HP (0.24 kW) - 12,000 RPM motors for trimming leading & trailing upper & lower edge/corners with "Fast Position",Unit can be used as a second top & bottom fine trimmer as well. -- Profile Scraping Unit:Top & bottom 2 mm or 3 mm thick PVC banding, digitals for horiz. adjustments. --÷ Flat Scraping Unit:Top & bottom glue scraping unit. -- Buffing Unit: Top & bottom Buffing Unit, 0.5 HP (0.37 kW) - 2,800 RPM motors), units tilt 0° - 30°Operator & Machine Control: -- Biesse SMART TOUCH 7" + Windows operating system, user friendly touchscreen control panel for workstations, rotating operator control panel w/keypad and LCD readout.Graphic 7" display touch screen. High-resolution screen for defined and intuitive images and text. Integrated 4GB hard disk for filing media files and the programs back up.USB port for managing in a simple and efficient way multimedia files, programs and updates. Ethernet port for connecting the machine to the net.Complete With: -- Insulated sound enclosure over all trim stations with split dust hood, viewing windows. -- Actual Model is BIESSE AKRON 1330 A

BIESSE AKRON 1445 A SINGLE SIDE EDGEBANDER Edgebander (W/PRE-MILL & CORNER ROUNDING): -- Specifications: &#9679 Min. panel height: 10 mm; Max. panel height: 60 mm; Height of edgebanding material: 14 - 64 mm; Thickness of edgebanding material in rolls: 0.4 - 3 mm; Thickness of edgebanding in strips: 0.4 - 10 mm.Min. panel protrusion from the track: 25 mm; Panel length: 140 - 3200 mm; Min. panel width (with length 140 mm): 85 mm; Min. panel width (with length 250 mm): 50 mm.Multi Speed Track-Feed Kit with (4) processing speeds of 8-12-15-18 MPM. (26-39-49-59 FPM), max speed is 15 MPM (49 FPM) when Corner Rounding, 12 MPM (39 FPM) for panels over 40 mm (1.57") height.Glue & Pressure Section: &#9679 Infrared lamp IRL 700; Gluing unit Quickmelt QM 703 EVA melting glue. Special glue container for PU glue; Additional glue container for EVA gluing unit with melting device; Automatic edge feed; Cutter knife; Pressure zone with 1-Drive & 2 pressure rollers.Working Units: &#9679 Anti-Adhesive Unit ADZ02: for ease of good cleaning before Pre-Milling. -- Pre-milling unit RT02; with "AUTO-SET", 2 x 0,8 kW, 12000 RPM motors, Diamond Cutters; front/rear inclination 0° -15°. -- NC Controlled Gluing, edge feeding, and pressing unit VC-511. -- End trimming unit IN-801; with 2 x 0,8 kW, 12000 RPM, front/rear, inclination 0° -15°. -- Rough trimming unit RS-502: 2 × 0,65 kW, 12000 RPM top/bottom. -- NC Controlled Fine trimming unit RF-02: 2 × 0,65 kW, 12000 RPM top/bottom; Unipoint tilting from 0° - 45° to facilitate adjustments. -- Sliding Liquid Unit for Corner Rounding. -- (2) NC Controlled Multifunction Corner Rounding unit AR02E, 0,65 kW each, for Corner Rounding, Straight Work pieces, Post and Soft-Forming 90° -180° degrees. -- NC Controlled Edge scraper unit RB02; Glue scraper unit RC02. -- Cleaning Unit LPT02 for scrapped edges. -- Buffing unit SZ02: 2 × 0,37 kW, 2,800 RPM motors. -- Hot Air Blower PH-501; To re-activate color of plastic after scrapping. Machine Features:&#9679 Top Belt pressure beam. The top presser comprises a rubber belt with a stain-proof coating. The thrust exercised on the panel is provided by springs housed on techno polymer connecting rods. -- Automatic track lubrication system with dynamic track absorption. -- Manual infeed system for narrow pieces. -- One coil automatic edge feeding. -- "TEKNO GLUE" system for Optimal gluing in any working condition. -- Pre-Melter QM-703 for EVA Glue. -- Hybrid gluing head for granulated EVA and Polyurethane glue. -- Pre-Melter QM703 for Polyurethane glue in cartridges. On-demand top-loading pre-melter for PUR glues. -- Adaptive infra-red lamp AdlRL-700, to heat up the panel side before the glue application, in order to optimize the adhesion process. -- Independent pneumatic exclusion of the top/bottom fine trimming unit. Operator & Machine Control:&#9679 Biesse, Windows-based, 21.5" full HD "SMART TOUCH 10" control & operating system.Complete With:&#9679 Kit p

BIESSE - AKRON 855, ...Edgebander with Premill & Corner Rounding (Loaded!)Specifications: -- Edge & Workpiece Capacity: 0.4 - 15 mm (0.016" - 0.59") Edge thickness; 14 - 65 mm (0.55" - 2.56") edge height; 10 - 60 mm (0.39" - 2.36") panel thickness; 140 mm (5-1/2") min. panel length; 85 mm (3.3") min. panel width. Infeed Section: -- Premilling Unit - "FI-701"Rectifies face to be edged before applying glue; horizontal & vertical movement of (2) motors on linear guides; independent automatic temporized intervention of (2) 1.8 kW (2-1/2 HP) - 12,000 RPM motors; independent copying pads on each unit, Autoset device to ensure optimum positioning of cutters according to thickness of panel being machined. -- Edge Feeding, Gluing & Pressing Unit - "VC-710"With automatic edge magazine for strip & coil stock; 3 mm (0.04") PVC guillotine; "TEKNO-GLUE" System includes: Pre-Melt "QM-701"; for quick heating & tank changing with floating & bidirectional glue roller applicator & NC axis idle presser roller movement device. -- Pressure Section: (1) Large driven & (5) Idle rollers, Independent pneumatic pressure control, Programmable servo motor for quick edge thickness changeover, Feed speeds 10, 14 & 20 MPM (33, 46 & 65 FPM).WORKSTATIONS: -- End (Edge) Trimming Unit - "IN-701-V"(2) 0.35 kW (0.5 HP) - 12,000 RPM Motors; automatic 4-position programmable chamfer from Control Panel (0°, 3.6°, 11°, 15°); sliding in slicing motion on 45° precision guide bar with oversized bearing blocks. -- Superimposed Flush (Double Edge) Trimming Unit - "RS-701"Top & bottom; (2) 0.8 kW (1 HP) - 12,000 RPM motors with superimposed motor position; 1° tilt capability; includes: Pneumatic exclusion device & Pneumatic top/bottom motor positioner. -- Tilting Top & Bottom Trimming Unit - "RI-701"(2) 0.65 kW (0.87 HP) - 12,000 RPM Motors; for radius top & bottom fine trimming; unit can be tilted 0° - 45°; includes: NC axis multiple machining device. -- Corner Rounding Unit - "CR-200V"For corner rounding; top & bottom trimming on panel edge with synthetic material & wood edgebanding up to 5 mm (0.20") max. edge thickness. -- Edge Scraping Unit - "RB-701"For finishing rounded off edges in PVC or ABS up to 5 mm (0.20") thickness includes: Pneumatic Unit Lifter. -- Flat (Glue) Scraper - "RCC-700"Top & Bottom, Removes potential excess glue before buffing unit. -- Buffing Unit, "SPL-700":Top & Bottom. -- Hot Air Blower Unit - "PH-700" - (2) STEINEL "2346" 2,000 W; reactivates color of thick plastic.Complete with: -- PC-Based Control Panel with: 15" Color LCD monitor, HF (High Frequency motors on all cutting & trimming workstations. Top pressure beam programmable via positioning motor; top pressure provided by belt holddown. 36" Dia. Coil table: Padded sound enclosure. -- Manuals (as pictured).Dimensions: 280" x 42" x 72" H. - Weight: 3,500 kG (7,750 Lbs.).

--This machine is in an Auction on exfactoryauctions.com--NO RESERVE-- (2 Available) BIESSE SKIPPER 100 2-Head CNC Machining Center, with Infeed & Outfeed Tables – Seller states that machine was run (2) shifts from 2005 - 2021, then only a few hours per day since! Specifications: Flexible "Top & Bottom" Machining Center that uses an innovative panel handling system. Working Capacity: "X" Axis 3,000 mm (118.11"), "Y" Axis 1,000 mm (39.37"), Max. part thickness 60 mm (2.36"). Min. workable part size: "X" Axis 90 mm (3.54"), "Y" Axis 70 mm (2.76"), & "Z" Axis 8 mm (0.31"). Work Table: Left-hand infeed & Right-hand outfeed, Each with 20-1/2” x 66” x 35-1/2” H infeed & outfeed areas with Fixed caster-type conveyor rails. Positioning Speed: "X" Axis 120 MPM (393 FPM), "Y" Axis 90 MPM (295 FPM), "Z" Axis 30 MPM (98 FPM). Boring Units: (1) Top & (1) Bottom boring blocks, Each with: 3 kW (4 HP) Motor, Boring spindle speed 4,000 RPM, (29) Vertical spindles with (17) "X" Axis & (12) "Y" Axis, (10) Horizontal spindles with (4 + 4) "X" Axis & (1 + 1) "Y" Axis, & (1) "X" Axis Grooving saw with 3 kW (4 HP) Motor, Blade speed 5,000 RPM, & Blade diameter 150 mm (5.91"). Machining: (1) Top & (1) Bottom 3.5 kW (4-3/4 HP) Electrospindles, Each with: Variable spindle speeds 7,000 - 18,000 RPM, Right-hand/Left-hand rotation, HSK D-50 Adapters for Manual push-button quick tool change, ERC-32 Toolholders & RC-32 Collets. Operator & Machine Control: Mobile Control Console, with PC-Based Control, 18" LCD Monitor, BIESSE "WORKS" + "WINDOWS" Operating system. Pedestal & Pendant controls. Equipped with: Universal transformer, 200 - 600 V, 50/60 Cy, 3-Ph., Automatic lubrication system for guides & ways, Sound hood, 79" H Safety fence with Lock-out door, & TAPESWITCH "CONTROLMAT CKP" 24" x 72" Heavy-duty ribbed pressure-sensitive safety mat. Complete with: 7’ x 9’ x 35-1/2” H Infeed Table, with Rails & Pusher. 6-1/2’ x 8’ x 35-1/2” H Outfeed Table, with Transfer Belts. Handheld Bar Code Reader. Dust Manifold. Dimensions including Safety Fence: 307" x 184" x 98" H.

BIESSE AKRON 440 AX EDGEBANDER (W/PRE-MILL & CORNER ROUNDING: -- Specifications: Material infeed for strips & coiled edge material like PVC, ABS, veneer, and solid wood. -- Edge & Workpiece Capacity: 0.4 - 3 mm (0.016 - 0.12") Edge; 10 - 60 mm (0.39 - 2.36") panel thickness; 140 mm (5-1/2") min. panel length, and 85 mm (3.3") min. width. -- Working Units:Pre-milling Station: (2) 3 kW (4 HP) - 150 Hz, 9,000 RPM Motors; equipped with panel blow off device and SIKO digital counters for adjustments. -- EVA Gluing Unit: Edge Feeding & Pressing Unit; automatic loading of tape in rolls and strips; quick-change glue pot system. -- Pressure Section: (1) Large 150 mm dia. driven & (5) idle pressure rollers. -- Feed Speeds: Operating feed speeds 12 & 18 MPM (39 & 60 FPM). -- Workstations: Double Motor End Trim; tiltable from 0° - 15°; each motor 0.8 kW (1 HP) - 12,000 RPM; sliding in a slicing motion on a 45° precision guide bar with oversized bearing blocks. -- Top & Bottom Trimming: (2) Motors 0.65 kW (0.87 HP) each; "Pro-Nesting" copiers; cutters R=2 mm. -- Fine Trim/Corner Rounding Unit: (2) Motors; each 0.65 kW (0.87 HP) - 12,000 RPM; motors carry out Corner Rounding and Top & Bottom Trimming on panel edge with PVC, ABS, etc. material, and wood edge banding up to 3 mm max. edge thickness. -- Top & Bottom Flat Glue Scrapper: To remove potential glue squeeze out. -- Buffing Station: Top & Bottom, (2) motors, each 0.37 kW (0.5 HP) - 2,800 RPM. -- Operator Interface:Operator Control Panel, "HDI" High-Definition touchscreen control, Windows XP based. -- User-friendly graphic user interface with diagnostic and assisted maintenance. -- USB and Ethernet port; 1.44 MB floppy drive, automatic or manual startup. -- Complete with:High frequency motors (200 HZ): Padded sound enclosure. -- Top pressure beam with staggered double-row hold-down wheels mounted on ball bearings. -- Actual Model is: BIESSE AKRON 440 AX

BIESSE SKIPPER V31 CNC MACHINING CENTER (VERTICAL): -- Specifications:Flexible "Vertical" Machining Center that can reach movement speeds of 164 FPM (50 MPM) in "X" & "Y" axis & 50 FPM (15 MPM) in "Z" axis with total safety. -- Max. workable part size: "X" axis is 98.4" (2,500 mm), "Y" axis 35.4" (900 mm), max. part thickness 2.75" (70 mm). -- Min workable part size: "X" axis is 7.8" (200 mm), "Y" axis 2.7" (70 mm), min. part thickness of .39" (10 mm). -- Boring unit:(1) Boring block with "QUICK CHANGE" spindle system, 4.2 HP (3 kW), variable speed from 1,500 - 7,500 RPM, (10) vertical spindles (5) spindles in "X" axis & (5) spindles in "Y" axis;(6) Horizontal spindles with (2+2) horizontal spindles in "X" axis & (1+1) horizontal spindle in "Y" axis;(1) "X" axis grooving saw; 9,000 RPM, 120 mm saw blade dia. -- Machining unit:(1) 6 HP (4.5 kW) Electro spindle router with ISO 30 adaptor, variable speed from 1,000 - 20,000 RPM;ISO 30 "QUICK CHANGE" push button tool change system. -- Operator & Machine Control:Biesse XP 600 + "BiesseWORKS Advanced" operating system.19" TFT monitor; international keyboard, soft-touch keypad & industrial mouse;RS-232 Serial ports, USB ports; (1) CD ROM drive, modem. Ethernet connection. Real-time multitask processing; programs can be transferred via diskette or downloaded by wire. -- Complete with:Pneumatic part clamping devices; sound enclosure; Lateral grid protection & safety mats; forced Auto Lubrication; Air conditioned control cabinet. Actual Model is BIESSE SKIPPER V31

BIESSE AKRON 245 Edgebander with Corner Rounding: Left-hand material infeed for strips & coiled edge material like PVC, ABS, veneer, and solid wood.Specifications: -- 0.4 - 8 mm (5/16") Cap. Edgebanding thickness, min. panel width 85 mm & min. length 140 mm, panel thickness 10 - 50 mm.Equipped with: -- Adjustable top pressure beam positioning. -- Automatic strip & coil feed magazine with robust shear type 3 mm PVC guillotine. -- Hot-Melt glue system (12 min. heat up time) with Teflon coated gluepot, digital thermostats with automatic kick-down when machine is in idle mode; 1" dia. glue applicator roller. -- Pressure section with (1) large dia. "non-stick" coated drive roller & (2) chrome plated idle rollers with pneumatic positioning.Workstations: -- Front & Rear End Trims (0.33 HP - 12,000 RPM motors), motors travel on (2) straight slides and pneumatic tilt 0° - 25° on horizontal plane. -- Top & Bottom Flush Trims with "Quick Change" motors (1.0 HP - 12,000 RPM motors), digital readouts for easy setup. -- 2-Motor (0.3 HP - 12,000 RPM motors) Corner rounding unit for trimming leading & trailing upper & lower edge/corners with "Fast Position" and can be used as a second Top & Bottom fine trimmer as well. -- Top & bottom Scrapers for 3 mm thick PVC banding, digitals for horizontal adjustments. -- Top & bottom Buffing (0.5 HP - 2,800 RPM motors), units tilt 0° - 30°. -- Top & bottom (2,000 Watt) Hot Air Blowers with temperature adjustment. -- Feed Speed 39 FPM, 3 HP feed drive.Complete with: -- Microprocessor for workstations & feed speed. -- Insulated sound enclosure over all trim stations with triple split dust hood, industrial lights and viewing windows. -- Extendable side panel support rail, 12 KVA - 240 Hz digital frequency inverters. - Includes: Used tooling on all workstations.

BIESSE JADE 240 EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): -- Specifications: Edgebanding thickness: 0.4 - 8 mm (0.01" - 0.31"); Min. panel width 85 mm (3-1/2"); min. length 150 mm (5.9"); max. panel thickness 10 - 60 mm (0.39 - 2.36"). -- Premill Unit: (2) 1.8 kW (2.4 HP) - 12,000 RPM Motors; "AUTO-SET" device ensures optimum positioning of the cutters according to the thickness of the panel being machined; numerical readout; pneumatic exclusion when not needed. Workstations: -- End Trimming: Front & rear end trims: 0.8 kW (1.0 HP) - 12,000 RPM Motors; motors travel on 45° slides and pneumatic tilt 0° - 15° from the Control Panel. -- Flush/Bevel Trimming Unit: Top & bottom flush or bevel trims with: "Quick Change" Motors; 0.65 kW (0.8 HP) - 12,000 RPM motors; digital readouts for easy setup. -- Corner Rounding Unit: (2) Motors, 0.65 kW (0.8 HP) - 12,000 RPM for trimming leading & trailing upper & lower edge/corners with 2-position pneumatic set-up for corner rounding. -- Edge Scraping Unit: Finishing unit to eliminate previous machining imperfections; pneumatic exclusion from the machine control. -- Glue Scraping Unit:Top & Bottom scrapers for 3 mm thick PVC banding. -- Buffing Station: Top & Bottom.Operator & Machine Control: -- BIESSE "Smart Touch 7" + Windows Operating System: User-friendly touchscreen Control Panel for workstations; rotating Operator Control Panel w/keypad and LCD readout.Graphic 7" display touchscreen; high-resolution screen for defined and intuitive images and text; integrated 4 GB hard disk for filing media files and the programs back up.USB Port for managing in a simple and efficient way multimedia files, programs, and updates; Ethernet port for connecting the machine to the net.Complete with: -- Top pressure beam & motorized feed track with "anti-slip" "Quick Change" snap on 80 mm wide x 60 mm long rubber pads; low friction nylon graphite self-lubricating chain pads. -- Sound Enclosure & Panel Support: Overall trimming stations; industrial lights and viewing windows; extendable side panel support rail. -- Fixed feed speed at 39 FPM (12 MPM); 3 HP feed drive.Options include: -- Anti-Adhesive Unit:The unit applies an anti-adhesive liquid on the Top & Bottom surface of the panel. It is positioned before the Pre-milling Unit.The anti-adhesive liquid is applied with precision by means of injectors controlled by the machine control. -- Nesting Package:Allows trimming of pre-machined panels. -- Transformer:230 Volt auto-transformer. -- Actual Model is BIESSE JADE 240

Biesse Rover B Edge semi automatic pod setting 4 coil magazine vertical and horizontal drill bank main spindle with U axis Milling X1: 5055 mm Y1: 1600 mm Edgebanding X2: 4100 mm Y2: 1600 mm Milling Module H74 - Z1: 245 mm Module H29 - Z2: 290 mm