Equipment For Sale

2013 Bobcat T650 -1507 hours -Enclosed cab with heat and A/C -Hand and foot controls -Pre emissions kubota diesel -NO DEF OR DPF -Wide track -Power quick attach -Keyless start -Air ride seat -No leaks codes or issues! Ready to work

2021 BOBCAT T770 Skidsteer, AC, 2spd, HI FLOW, NEW TRACKS VERY NICE

Air Conditioner Auxiliary Hydraulics Flow - High Flow Auxiliary Hydraulics Pressure - High Pressure Bucket Combined Hydraulics - One Way Coupler Type - Mechanical Hand and Foot Control Heater / Defroster Lighting Radio - AM FM Radio Ride Control ROPS - Enclosed Self Leveling Tier 2 Compliant Ultra Low Sulfur Diesel Fuel

2 Speed, 78" Bucket, Aux Hydraulics, General Purpose Bkt, Joystick, ROPS, Rubber Tracks, Self-Leveling

BOBCAT 595 HAND FOOT CONTROL 2109 HOURS 71 PACKAGE 74 HP ENGINE MEETS TIER 4 REGULATIONS WITHOUT DPF. RATED OPERATING CAPACITY AT 35% TIPPING LOAD IS 2,200 LBS VERTICAL LIFT PATH FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2 Speed Travel Air Conditioner Bucket Coupler Type - Hydraulic Heater / Defroster Lighting ROPS - Enclosed Ultra Low Sulfur Diesel Fuel

AIR CONDITIONER AM FM RADIO BLADE BLUETOOTH EPA LABEL HAND AND FOOT CONTROL LIGHTING PILOT CONTROL THUMB, HYDRAULIC ULTRA LOW SULFUR DIESEL FUEL

2016 BOBCAT E85 EXCAVATOR 2,820 HOURS BLADE AUX HYDRAULICS 18,977 OPERATING WEIGHT GOOD TRACKS GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

Air Conditioner Auxiliary Hydraulics Pressure Blade Hand and Foot Control Lighting Mirrors Thumb Type - Hydraulic

2014 Bobcat S630 Skid Steer Engine Gross Power 74hp Aspiration Turbocharged Operational Lift Arm Path Radius Fuel Capacity 24gal Max Speed 7.1mph Loader M2-Series Operating Load Rating 2,180lb Tipping Angle 4360 degrees Auxiliary Std Flow 23 gal/min Auxiliary High Flow 30.5 gal/min Operational Weight 7610lb Length With Bucket 1.14ft in Width Over Tires 6.01ft in Height To Top Of Cab 6.78ft in Wheelbase 3.78ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2 Speed Travel Air Conditioner Bucket Combined Hydraulics - Two Way Coupler Type - Hydraulic Emissions Level Hand and Foot Control Heater / Defroster Lighting Pilot Control Product Link Radio - Bluetooth Regulatory Marking Ride Control ROPS - Enclosed Self Leveling Ultra Low Sulfur Diesel Fuel

2 Speed Travel Air Conditioner Anti-theft System Auxiliary Hydraulics Flow - High Flow Auxiliary Hydraulics Pressure - High Pressure Beacon Bucket Coupler Type - Hydraulic Hand and Foot Control Heater / Defroster Lighting Radio - AM FM Radio Ride Control Rig Saver ROPS - Enclosed Self Leveling Ultra Low Sulfur Diesel Fuel

BOERE - TKS 900, ...2-Head Top Wide Belt Sanding Machine900 mm (36") Working width; equipped with: (1) Contact roller, (1) Fine sanding pad. Head Configuration -- 1st Head: Rubber contact roller, spirally grooved, Shore hardness 80, diameter 265 mm (10.4"), driven by 18 kW (25 HP) motor. -- 2nd Head: Sanding pad, electronic-pneumatic controlled, 114.7 kW (20 HP); Air blowing unit for cleaning the abrasive belt. -- All heads use abrasive belts size: 910 x 1,900 mm (35.8" x 74.8").Feed System -- Variable feed speed: From 5 - 25 MPM (16 - 82 FPM); 1.5 kW (2 HP) motor. -- Motorized part thickness opening: 3 - 150 mm (0.1" - 6"), driven by 0.12 kW (0,15 HP) motor.Complete with: -- Emergency Stop Systems for abrasive belt breakage and low belt tension. -- Infeed safety bar for operator protection and oversized parts. -- Automatic Star Delta starters, motor load meters. -- Pneumatic belt tension. -- Emergency Stops at the front & back. -- Extended infeed belt, approx. 42" long.Actual model: BOERE "TKS 900".

BOERE TPK-900 Planer Sander 2 Heads -- 2-Head, 900 mm (36") width cap. equipped with (1) Knife planer head and (1) Rubberized Drum. -- 1st Head: Helical knife planer head with (4) spirals of 4-sided carbide inserts each 14 mm x 14 mm, 20 HP motor. -- 2nd Head: Drum, approx 10" dia. rubber covered contact roll, 15 HP motor; all heads with air operated caliper type disc brakes. -- Variable feed speed 13 - 52 FPM, 2.5 HP motor, automatic conveyor belt tracking, anti-kick back fingers on infeed, infeed hold down shoes and double outfeed pinch rolls on outfeed. -- Motorized part thickness adjustment 0" - 6" with LED read out display . Complete with: -- Controls mounted on belt loading side, load meters for each head, conveyor infeed extension.

50” width drum/drum/platen heads 480 volt 3-phase Bottom and top sanders can be sold separately Pictures coming for bottom sander

Model: C 30 N PSI150 3.210 m3/min CFM: 113 30 HP Size: 30.4 x 41.6 x 68.3 Weight: 1193 lbs

Boge compressors S-100 100HP S/N 50475

Boilersmith Boiler System Installed But Never Run

Wood-Fired BOILERSMITH Boiler fitted with CHALLENGER Cumbustion Unit;Complete with the following major components and features: -- 250 PSIG design pressure. -- BOILERSMITH Boiler Model HRT2H8-2600SF-XW-250 with 2600 Sq. Ft. boiler surface area. -- Fuel can vary in moisture up to 50%. (Boiler HP is reduced as moisture increases.) -- Fuel feed Auger with Variable Frequency Drive. -- Fire-Tube Boiler with integrated Air Blast Tube Cleaning. -- De-Ash Augers. -- All Electrical Controls and starters. -- All mechanical/ electircal engineer's drawings.NOTES: &#9679 Removed and ready to load onto two trucks, 38,000 and 42,000 pounds. &#9679 15,000 to 16,000 pounds per hour steam if burning wood pellets. &#9679 No building included but same building can be purchased from STAR.

Biomass Boilersmith Boiler 400hp 250 psi. barely used, 90 percent life expectancy All inclusive,boiler, Biomass unit, ash conveyors, all input/ feed conveyors, EPA approved pollution mitigation system, Electrical components. Was designed to have a Co-Gen unit added