Equipment For Sale

BREWER - Single-Head, ...Horizontal ResawWith the following features: -- 15 HP Motor. -- 6-1/2" Wide x 6-1/2" thick resaw cap. -- 2-Belt drive; 36" working height from the floor. -- Variable speed hydraulic drive with: Top and bottom powered tire and belt; 30" dynamically balanced band wheels at 900 RPM for vibration free running. -- 1" or 1-1/4" Wide bands.NOTE: No Return Conveyor System.

4 Saw Gang Edger - Unit is in good shape and has powered hold down rolls

Brewer Unscrambler

20' 4-Strand Log Decks | Golden Eagle Slasher Saw | 2) Golden Eagle Deluxe Cabs | Primary Single Arbor Scragg Saw | Secondary Single Arbor Scragg Saw | 2) Golden Eagle Slab Edger Saw | 310-U 3 Head Under Saw | 2000 5 Head Band Saw | Side Winder Board Desduster | Super Golden Eagle 3 Head Splitter Band Saw | 4 Head Under Cut Cant Trim Saw | BR-9920 Double Arbor, 20" Bay Gang Saw System | AIT TS300 Stacker | 2) M2L Stackers | BR-4004C Double Head Notcher | Golden Eagle Chamfer | Complete Conveyors, Infeed, Rollers and outfeeds for all machines. Complete system 2013. Have videos and more pictures upon request.

Brewer 6-Head Golden Eagle with piping and blower, very low hours.

BREWER HB-1685 CUTOFF SAW W/26" SAW BLADE, 25 HP MTR ON SAW, 18 IN X 16 FT PWR ROLL INFEED W/ HYD BOARD STOPS, HYD CANT FLIPPER W/ 18 IN X 6 FT PWR OUTFEED, 4 FT X 5 FT STEEL INSULATED CAB W/ CTRLS, HYD PWR UNIT, S/N 121286

Brewer BR-1695 Cut Off with In Feed & Out Feed with Air Auto Stops S/N 042099

1-Brewer infeed deck, 2-Brewer unscrambler, 3-Brewer cut off saw BR1695, 4-West Plains 400 two head band saw, 5-Transfer chain and infeed chain, 6-Brewer Gang saw BR8112S.

2002 Brewer Chamfer with Controls 15HP Electric Motor model: 2002DCF s/n: 070303

480V | 6" x 12" | 6 Knife Planer Head

Brewer Double Arbor Gang saw starter panel, 2 large motor starters plus 30 hp planer starter, reduced voltage on the larger starters. Good condition kept inside.Rob 713-304-8544. Pasadena , TX.

Brewer Notcher, 30HP motors and starters, currently has a 4” dado cutter, Econotool, would need complete set of heads for 4 way Notcher or use current set for one head plus radius cutters. $15,000 FOB Pasadena, Tx Rob 713-304-8544 Included is the auger to remove dust from under the machine.

1997 | 480V 3ph | Fully operational, no rust

Brewer BR-8112 S | 460 V | 25hp Cross Cut | 100hp Bottom Arbor | 60hp Top Arbor | 30 hp Plainer Motor.

Brewer single head notcher, 15 hp electric drive motor, indexable head, good working condition

Brewer 3-Head Resaw | 1998 | 480V | GE2000

16” Width Capacity Approx 15 HP Top Head Approx 10 HP Bottom Head Feed 23-65 FPM 220 Volt 3 Phase

BRIDGEWOOD - BW-508 PV ...Planer20" Width cap.; 1/4" - 9" opening; 7-1/2 HP motor (3-phase) with: 1-1/2 HP Feed motor; both made in the USA; variable feed speed: 20 - 32 FPM.Complete with: Segmented infeed roller; cast iron chip breaker and adjustable bed feed rollers; 3-knife cutter with jack screw adjustment. - Includes (2) sets of knives.

BRIDGEWOOD BW-511MS Sliding Table Shaper Single Phase 4 HP Motor with forward & reverse.Specifications: -- 3/4″ Spindle with 4-1/2″ under the nut, and 3-1/2" of Spindle travel. -- (5) Spindle speeds: 3000, 4000, 6000, 8000 and 10000 RPM. -- 52" Table Length, and 35 Sliding Table Length1-used BRIDGEWOOD BW-511MS SLIDING TABLE SHAPER. Table Length: 35″, Sliding Table Length: 52″, 3/4″ spindle with 4-1/2″ under the nut, Also , Spindle Travel: 3-1/2″, Motor: 4 HP, single phase, (5) spindle speeds: 3000, 4000, 6000, 8000 and 10000 RPM. For operation on 220V, 1PHNote- the feeder in the photo is not included

WANTED BROCKWAY CABOVER, it will look like a F model Mack. Call Aaron 828-284-0145 or Ethan 828-284-5805 (Picture for attention / example)