Equipment For Sale
10582 Results Found
$ 1,500
For pre-glued PVC, veneer, & melamine laminate coil stock; 0.4 - 1.2 mm edge thickness; up to 35 mm panel thickness cap., automatic coil feed. -- Equipped with: Electronically controlled temperature setting for hot air blower; 3,000 Watts for up to 650° F temperature; (1) Min heat up time. -- Guillotine type front & rear end trim (with fast speed, flying knife); top & bottom flush trims with single motor drive to cutterheads. -- Overhead belt type feeder; 16 FPM feed speed. -- Mounted on machine base with panel support table.
VITAP ALFA 27 CONSTRUCTION/LINE BORER27-Spindle boring head on 32 mm centers, drills vertically from bottom-up and head rotates to horizontal position for edge boring, head rotation is pneumatic with switch control. -- 2-3/4" Max. drilling depth, 2.5 HP - 2,800 RPM motor, pneumatic drill head advance with speed control; head height adjustment with mechanical digital readout; 34" x 20" table size, max. workpiece width 31-1/2". -- Equipped with: Left & right side fences for construction boring, (2) pneumatic holddown clamps, 118" line boring fence w/flip-stops, pneumatic foot pedal control, magnetic starter & overload protection.
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
$ 46,900
VALPATO LBK-150-ST 1 Feed Through Profile SanderTECHNICAL FEATURES: An added small needle type drum sander can be fitted with drum sanding aggregates of 25, ­30, ­35,­40, ­45 ­50 mm diameters which can be used for tighter curves and smaller radius sanding requirements. Storage compartments (2 in total) are located on each machine extremities, these are easily accessible and can be used for sanding belts and various tooling storage. Sanding belt motor power: 3 Kw Abrasive head motor power: 1.5 Kw Oscillation motor power: 0.38 Kw Feed motor power: 0.75 Kw Motor power for electrical adjustment of sanding group: 0.19 Kw Machine voltage: 480/3/60 Full Load Amps @ 480V: 15A Compressed air: Not required Dust collection requirement one (1) only 6" (150mm) port: 950 CFM Sanding belt speed: 14 Mt/sec Variable speed of the belt: from 5 to 25 m/min Sanding belt dimensions: 150 x 2640 mm Height of working table: 930 mm Dimensions of front working table: 1980 x 250 mm Machine dimensions: 2500 x 900 x 1600 mm Net weight: 1000 KMAIN FEATURES: User friendly PLC touch screen control panel is accessible from 360° by the operator, the control panel is centrally located on the infeed end of the machine. Factory installed variable feed drive (VFD), enables machine to run from 5 M/Min to 25M/min (+/­ 80 ft/Min). The entire sanding plenum rise and fall is motorized, it can be adjusted vertically in height to utilise the full height/width of the sanding belt. An oiling unit ensure long life of sanding plenum rise and fall master cylinder.
Call for Price
Call for Price
2019 Volvo L150H Wheel Loader with 12,655 hours, on a diesel engine. Good condition, all glass and mirrors intact, minimal rust. 26.5R25 Bridgestone Tires with life left. Heat and A/C. Weight 56,440 lbs Length 28.91ft in Width 9.72ft in Height 11.75ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 12,500
This 2006 Volvo truck is in great condition internally and externally. The truck has 1,429,462.4 miles on it. The truck has an automatic transmission. The passenger seat has been taken off. We are currently waiting for the title of the truck to come in. If interested in this truck call Mr. Gavin 601-394-7796 Mr. Tim 251-366-3237 Kameron 251-242-5493 The truck is located in State Line, Mississippi, 467 St Peter St
$ 152,000
2018 Volvo L110H -4,172 Hours -Original paint -3rd Valve -Quick Coupler -Boom Suspension -Engine Block Heater -Rear View Camera -23.5R25 Tires -118” 4.3-yd GP Bucket
$ 125,000
2018 Volvo L90H -4857 hour -Brand New 20.5R25 Tires -A/C, Heat -3rd Valve -Quick Coupler -Boom Suspension -Rear View Camera -108" 3.5 yd GP Bucket. -Service Records available
$ 59,500
1996 Volvo A35C, 16,981 hrs., Volvo 6cyl. Turbo diesel, automatic trans., 6 wheel drive, front/rear diff locks, tailgate, EROPS, Heat/AC, 26.5R25 tires, new air and fuel filters, %59,500
$ 25,000
Volvo L-90C wheel loader, 20,567 hrs., includes log clamp attachment, has quick-attach, working condition
$ 3,250
$ 44,000
$ 75,000
2016 VOLVO 170H WHEEL LOADER 6,742 HRS QUICK COUPLER 3YD BUCKET HEAT AND AC GOOD TIRES VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM
$ 34,900
2007 Volvo DHD D12 464 HP engine 10 speed Full locking 46k rears 4:44 ratio T ride suspension 452k miles Nice truck PICTURES COMING SOON