Equipment For Sale

Wintersteiger DSG Sonic Frame Saw

Wisconsin B20-M multiple spindle horizontal drilling machine 8' 4-HEAD 13-SPINDLE DRILLING MACHINE 3 HP DRILLING MOTORS, HYDRAULIC , AIR CLAMP Serial # B20M-6825-96 5 HP hydraulic pump: 230/460V, model CLT-30 GAL, 1050 psi, 8 GPM., serial# 1-89175-0 Four Baldor Drilling motors 3 HP, 208-230/460 volts, 3450 RPM., Baldor, Removed from a complete plant liquidation in October 2020. Stored inside a climate controlled room, Contact us for a delivered price

MLS Number 10684323 Wisconsin Automated Machine C-450 Tennoner Single end tennoner Automatic double head coping tennoner Model C-450 Serial: C-450-6901-00 230 volts, 3 phase, 60 Hz. Allen-Bradley and Motortronics electrical Motors are 230 volts 48 full load amps. 15.2 amps on largest motor

For sale, used trade-in Wolfe Ridge 35 HDI Box Wedge machine. Customer had two of these machines, and traded one in on a new VS. This machine has 360 hours on it, and was just gone through at the shop here ready for its new owner. Pick from your choice of box wedge - ONE included with the machine - 3x3, 3.5x3.5, 4x4, 4.5x4.5. Traditional 2/4 way wedge with bolt on height adjustment is also included. Honda GX630 v-twin gas engine, 35 ton splitting force. Please call 715-598-7790 for more information. Located at our factory in Eau Claire, Wisconsin but can ship anywhere in the US or Canada.

32" Vertical grinder with 25 HP motor Dentom 624 9500 BTU Furnace automated measured feed controlled by furnace temperature Holding tank for feed from the grinder which is automatically fed to the furnace...that feed is temperature controlled.

2020 Wood Beaver 18 BAB Only 245 hours Shrink wrap machine also available

1995, 2400 hr. 25 hp. Vanguard gas engine, all 12V, a new 12V motor for the debarker, 1.25" bands 30 extra band blades, 28"x16' cutting capacity, many NEW parts added, mill in use, in GOOD condition. Write: Reuben Yoder 25090 County Highway J66, Davis City, IA 50065 for more info.

2012 Wood-Mizer LT70HD 2297 hours 55HP diesel Preset dimension settings Work ready

-In Auction--Only Used Sparingly in 4 Years!-- WOOD-MIZER EG300EC25U Multi-Rip Board Edger, with "E25" Electric Motor Specifications: - No. of blades 2 - 5, Min. distance between blades 1", Blade dia. 350 mm (13.78"), Arbor dia. 3", Blade speed 3,520 RPM. - Feed speeds 0 - 25 MPM (0 - 82 FPM). - Min. board length 700 mm (27.56"), Board thickness 10 - 60 mm (0.39" - 2.36"). - Max. edging width 420 mm (16.54"). - Max. material width 550 mm (21.65"). Equipped with: - "E25" 21.3 kW (29 HP) - 3,520 RPM Blade motor. - 1/4 HP - 890 RPM Blade positioning motor. - 23-1/4” W x 6’ L x 33-3/4” H Infeed roller table, with (4) 2-3/8” Dia. Rolls on 15-1/2” Centers & 47-1/4” L x 2-1/4” H Fence with 6” Inward adjustment. - Galvanized steel anti-kickback fingers. - 4-1/4” Dia. Knurled steel infeed & outfeed rolls, (2) each. - 4” Dia. Steel infeed & outfeed hold-down rolls. - 23-1/4” W x 6’ L x 33-3/4” H Outfeed roller table, with (4) 2-3/8” Dia. Rolls on 15-1/2” Centers. - Return rollers. - 27” x 34” x 17-1/2” H Removable steel chip bin. - Pedestal control, with SCHNEIDER ELECTRIC "MAGELIS" HMI Interface with Touchpad & LCD Display. Complete with: - Safety, Operation, Maintenance, & Parts Manual. - (4) SEMICON Lasers, (2) Currently installed. - (3) Additional blades. - Spacers: (4) 1”, (4) 3/4”, (4) 3/8”, (2) 1/4”, & (5) 3/16”. - Accessories (As pictured).

2005 Wood-Mizer LT300 thin kerf 30 HP horizontal band mill w/ soft start mounted controls, 2,900.5 hours, hydraulic dogs & stop & load, electric carriage w/ (2) new inverter drive motors w/ setworks – electronic & latest generation - 12’ x 5’ (2) strand infeed log deck - 20’ x 24” belt w/ shaft mount electric drive w/ MCC - 6’ x 8’ catch & roll table - Includes spare parts - 25’ (2) strand lumber sorting chain w/ detachable link chain & 7.5 HP drive - 2019 Accucut hydraulic feed edger w/ 30 HP motor, (2) laser line lights, (1) movable saw & moves w/ operator’s wheel steel table infeed & outfeed, 24” wide cutting space, mounted blower and (3) sets of (2) piece split edger blades (ref #145)

Year 2000, 2670 total hr. hours will probably go up yet, 38 hp Kohler gas engine, Only 1000 hr. since new, setworks, debarker, Lubmizer, 50 sharp blades, 4 gas tanks, Owners manuals for everything, Call 717-423-0010 for more info.

REDUCED TO SELL!! Wood-Mizer LT-300 W/ Infeed log deck, outfeed incline belt LT300, 3-way outfeed conveyor, includes extra blades, 9,400 hours - Wood-Mizer 24 x 19 belt outfeed conveyor and electric drive, S/N 10004089A2.00 - Wood-Mizer TD2D12 3-way separator, S/N 1004027A1.00 - Wood-Mizer 25.5’ (2) strand log infeed deck w/ hydraulic stop & load & hydraulic drive Complete mill (ref # 162) Call Amy for more information (928) 723-9449

WM LT300 w/Cab. Electric Powered.

Wood Mizer 4 head resaw with run-a-round , needs some chain and cylinders put back on it, cuts 6" wide

System includes: Wood-Mizer LT 70 Sawmill Wood-Mizer 2 Blade Edger Wood-Mizer 2-Head Resaw Norwood 2- Blade Resaw All powered by electric motors All decks and conveyors

Wood-Mizer 12' (2) strand custom log deck, Excellent Condition (Rarely Used)... Contact Amy for more information (728)723-9449

Wood-Mizer 4 Head Resaw with Run around -4 brand new electric motors -Upgraded to 20 HP 3600 RPM motors -Everything is great working order -Still hooked up and operational

Wood-Mizer EG100 #20380 - 220V single phase - 10 HP electric motor - Both extension tables - Probably around 1000 hours (no meter) - Speed knob is broken. Seller ran it by himself and it worked fine on slow speed. - Safety switch was disconnected as it kept tripping. Call 800-459-2148 for more info.

2001 Wood Mizer LT40 Super Hydraulic - Wood Mizer LT40 Super Hydraulic with re-saw attachment with setworks - Replaced the hydraulic motor for the re-saw and replaced the guides. - 25HP Electric Motor. - Road ready. - Can be switched to portable power - costs around $4000-$5000 from Wood-Mizer. Call 800-459-2148 for more info.

This Woodmizer LT-70 Super Hydraulic Wide comes with a 55hp diesel engine with ONLY 60 hour on it! It has always been kept under cover and has been very well maintained by the Woodmizer dealer in Newnan, GA. This unit comes with the pedestal control station w/fully proportional joystick controls allowing the operator to be positioned anywhere to control all head & bed functions. It also has a de-barker, Lube-Mizer and 6 box of blades. This Sawmill is ready to go to work! Call 423-405-8280 for more info or to make an offer.