Equipment For Sale

Coe 6' x 9" Double Cut Air Strained Band Mill Model# 972 Serial# 114

COE 249D Veneer Lathe with the following: -- 27" maximum log diameter, 110" knife length. -- 1484 Veneer Lathe Big Bar. -- 1390 Veneer Lathe Core drive. -- 3 to 1 inner drive ratio. -- Capable of peeling 35 cubic meters per hour. -- This COE Veneer lathe line was completely rebuilt and installed in 2006. The lathe was operated less than one year and is reportedly in excellent condition.

Coe 47' x 26' Package type dry Kiln with Controls, 1989 Hurst gas boiler 150 PSI, 6900# Steam Per Hour S/N 51000-750-3, Condensate Tank & Pumps & Electrical. can Buy as a Package or Seperate the Hurst Boiler.

Coen 230 Combustion Wood/LP Gas Fired Burner

COLUMBUS MCKINNON - E-915, ...Tire Shredder -- Motor: 250 HP. -- Control panel: 120 Volts. -- Feed opening: 28" x 49". -- Knives width: 2-1/16" (double). -- Weight: 33,000 Lbs. -- Loaded onto Truck.

Comac TAG 100 Package Kiln 30'x36' Gas fired with control room Looks like 70 MBF with 4/4 lumber

Photos coming Compact DDM6 Profile Canter Line Double Length Infeed Production: 27,000 Logs/ 24 hours, 360 FPM (2x6), 500 FPM 2x4 Infeed belt conveyor V flight scanning conveyor without the scanner and optimization system One pass small log processor Outfeed belt conveyor #1 Outfeed lifting belt conveyor #2 Outfeed belt conveyor #3 Lumber landing table Motor Control Centers (MCC) Programmable Logic Controller (PLC) - obsolete

ComacT Edger, 2-Saw Movable, All Motors - $32,000 - Call Jeff for more info at 574-370-5050

2002 Comact 18' x 10' x 10' Wave Log Feeder

Denis 948 Gang Saw

MLS Number 11922341 Denis Comact 948 Gang Saw Edger 6" infeed table Spare guides

COMEC - FAS/2, ...Corner Milling MachineCOMEC FAS is a dedicated milling machine with: Inclinable heads for machining the corner of chair seats. Specifications: -- (2) Heads with: 5.5 HP motor and 40 mm spindle shaft. -- Max. cutter size: 150 mm (5.9"). -- Tilting of milling units: 20°/ +45° in horizontal plane. -- Fixed left hand column to support head unit. -- Max. working height: 200 mm (7.8").

COMEC - LON-LS, ...Horizontal Belt SanderSpecial design for sanding of straight or curved solid wood parts such as: Chair legs, chair backs and other similar & difficult-to-sand parts.10 HP Belt driven motor; 12" dia. contact drum for 10" wide x approx. 140" long abrasive belt; air tracking & belt tensioning. -- Stock is fed over the contact drum with an overhead variable speed, pneumatically tensioned feed wheel. -- Sander belt power: 6.6 kW (9 HP approx.) - 220/440 V, 60-Cy, 3-Ph motor.

COMEVA - CUBE 3, ...Edgebander (Single Phase)The CUBE 3 from COMEVA is designed to be a very compact "every day" Edgebander. The CUBE 3 Edgebander is operated through a PLC control system with a touchscreen. The machine handles panel thicknesses of 0.315" up to 1.77" (8 mm to 45 mm), The coil feed accepts Edgebanding from 0.4 mm to 2 mm thick; strip material can be hand-fed.Equipped with: -- Heated infeed fence for optimum glue penetration. Large capacity Teflon coated glue pot (2.64 Lbs). -- Single motor End Trimming station -- Top & Bottom Trimming -- Top and bottom Buffing. -- Feed speed is variable between 9.8 & 23 FPM (3 - 7 MPM); feed chain pads with replaceable rubberized surface inserts. -- Rubberized holddown rollers with ball bearings for low friction and long life. Work stations: -- Pneumatically operated guillotine for up to 2 mm thick banding, followed by spring loaded double pressure rollers. -- Single front/rear trimming unit, 0.3 HP motor. -- Top & Bottom trimming units, (2) 0.5 HP motors. -- Top & Bottom buffing station, (2) 0.16 HP motors. -- Complete with: Safety enclosure protects the operator from noise and debris. Engineered & Manufactured by COMEVA S.L, in Spain.Includes: Owner’s Manual with mechanical & electrical schematics and parts breakdown; covered by a 1-Year Factory Warranty on parts.

COMPAIR - LeROI WM-100SS II WQ, ...Rotary Screw Air CompressorSpecifications: -- Main motor: 100 HP -- Working pressure: 125 PSI -- Capacity: 445 CFMNOTE: THIS MACHINE REQUIRES AN EXTERNAL COOLER Note: This machine has (21,311) hours on it.

Complete Sawmill Operation Asset list includes: Corley 2-HB Sawmill: 200 HP, log deck Corley 8x48 Gang Edger: 24" Blades 4-Head Trim Saw 2-Head Trim Saw Gabbiani Gang Rip Saw Wood-Mizer 4-Head Resaw Bob Hanna Double Notcher Precision Chipper: 48", 100 HP Motor Pendu Stacker (2) Case Forklifts Tigercat Knuckle Boom Loader with Bucksaw Mack semi (2) Pallet Dismantlers John Deere 744 Loader with bucket and grapple Miner 2-Blade Edger Misc: Motors, hydraulic packs, decks, conveyors, rollers, gear boxes Includes: All electrical and controls

Complete mill ready to dismantle and move. - Precision Roster Head Debarker - Corley Sawmill & Carriage - Comac Dry Kiln

All machinery sold as a package. Just removed from production, available immediately. Scragg Mill 5 Strand Log Deck 3 Strand Log Deck (2) 40" Blowers Honey Badger Pallet Nailer 671 Detroit Diesel Wood Mizer EG400 Edger 3 Strand Log Deck 35' Green Chain 2 Strand Deck Timberland Pallet Notcher 4 Head Morgan Resaw Single Head Morgan Resaw 16' x 4' Conveyor

Pallet manufacturer has decided to go a different direction. All machinery will be available as a package or by individual piece! Click for individual listings: - [Baker Single Notcher](https://www.carolinamachinerysales.com/listings/4808984-used-baker-single-head-notcher) - Baker Model C 4-Head Resaw - [Brewco B1600 Grade Resaw](https://www.carolinamachinerysales.com/listings/4806400-used-brewco-b1600-grade-resaw-system ) - [Nyle PHT350 Kiln](https://www.carolinamachinerysales.com/listings/4803222-used-2023-nyle-pht350-dry-kiln) - [Pallet Chief IV with Stacker](https://www.carolinamachinerysales.com/listings/4803270-used-2023-pallet-chief-iv-pallet-nailer) - [Pneumatico Block Nailer](https://www.carolinamachinerysales.com/listings/4803246-used-2023-pneumatico-block-nailer) - [Viking Champion 304A Nailer](https://www.carolinamachinerysales.com/listings/4803252-used-2015-viking-champion-304a-nailer) - [Viking Champion 306 Nailer](https://www.carolinamachinerysales.com/listings/4805708-used-2021-viking-champion-qc306-nailer)

30” x 165’ Concave Belt, Conveyor/Shaft Mount Drive