Equipment For Sale

SELCO WNT 7/730 REAR LOAD, AUTOMATIC PANEL SAW -- Specifications: 177" (4,500 mm) Overall cutting length, 5" (127 mm) max. saw blade projection, 29 HP (22 KW) main & 3.5 HP (2.6 KW) scoring motor. -- Saw Carriage:Variable saw carriage speed from 0 - 606 FPM (0 - 185 MPM), return speed 600 FPM (185 MPM); Rack & pinion drive, driven by AC brushless Servo motors. -- Pusher Fence:Electronically controlled overhead program fence with (8) pneumatic gripper clamps (open up to 5" / 128 mm).Forward speed of 295 FPM (90 MPM) & return speed of 295 FPM (90 MPM); rack & pinion drive, driven by AC brushless Servo motors. -- Operator & Machine Control:PC front end with Selco "OSI" + WINDOWS "7" operating system with easy programming of very complex cutting patterns.15" Flat screen monitor displays REAL-TIME graphics of cutting dimensions & patterns, program cutting list, manual cuts, diagnostic & on-line help.Data input by industrial keyboard & mouse, floppy disk or CD; direct downloading from office PC is possible.OSI (Open Selco Interface) guarantees fully automatic management of cutting patterns by optimizing all machine movements (pressure beam, saw carriage and side aligner pusher positioning, etc.).The numerical control adjusts the optimum saw blade projection for the stack of panels being cut and sets the most appropriate cutting speed, in relation to the stack itself and, when necessary, to the width of trim cut too. -- Rear Load Lift Table:Automatic lift table 173" x 87" (4,400 x 2,200 mm), 12,000 Lbs (5,455 KG) lift capacity.4 HP (2.3 kW) Motor for raise-and-lower, encoder-controlled guide rods for automatic book height adjustment; 28.7" (730 mm) max book height w/o a pit or risers. -- Rear of machine:(3) Lateral aligners to accurately position book of panels on rear table prior to cutting.Rear modular roller support rails with 80 mm dia rollers; rear of machine enclosed for safety. -- Front of machine:Automatic side/crosscut aligning device located inside the pressure beam aligns the panels against the right angle fence prior to cross-cutting, 2.4" - 87" (60 - 2,200 mm) stroke.90" (2,300 mm) Long crosscut fence (front-to-back); (4) Front mounted air flotation tables with rounded fronts 26" x 81" (650 x 2,050 mm). -- Complete with: "Quick Change" saw blade system; "DIGISET" electronic scoring adjustment; Selco "Quick-Opti" optimizing software; CP link. -- Options Include:173" x 87" (4,400 x 2,200 mm), LH facing, rear in-feed/out-feed conveyors with fork cut-outs that allow for staging/loading/unloading from the Rear LH side of the machine. -- Actual Model is SELCO WNT 7/730/4500.

Model: EB108 Active Description: cutting dimensions 4300x4400mm optimization main motor power 13,5kW scoring unit motor power 2,2kW cutting height 107mm 6 pneumatic clamps feeding speed 5-100m/min beam speed 80m/min Year: 2007

Selco EB70 Panel Saw

Selco WNT 200 Rear Load Panel Saw S/N 400.066.94

Giben WNAR6 Series Twin Pusher Angular Panel Saw Cutting length rip cut 3200 mm Cutting width cross cut 2200 mm Projection height 95 mm Lateral loading lift table with direct motorized infeed and right motorized infeed 2200 mm width interior panel turning station in the rip cut section Book aligners for both long and short rip stacks 17 material clamps Split pusher in the cross cut area

Selco WNT610 Rear Load Panel Saw Biesse Winstore Material Handling System This system is already dismantled by a technician and ready to be shipped. Installation can also be provided.

SELCO - HS0-128A, ...Horizontal Auto-Tie Baler -- Motor: 50 HP -- Cylinder: 8" -- Feed Opening: 36" x 28" -- Conveyor NOT included -- Loaded onto your Truck

SELCO HL60-M Horizontal Closed Door BalerSpecifications: -- Full Penetration. -- Motor: 30 HP. -- Cylinder: 8". -- Feed Opening: 60" x 45". -- Shear Blade. -- Bale Size: 48" x 40" x 72". -- Max: 2,100 Lbs OCC. -- Feeding Cleated Motorized Belt Conveyor: 20' L x 36" W. -- Loaded onto your Truck.

SELCO - HLO-608-A40, ...Wide Mouth Auto-Tie Horizontal BalerSpecifications: -- Bale size: 48"; x 40"; x 72"; -- Main motor: 40 HP -- Cylinder: 8" -- Twister motor: 2 HP -- Cooler motor: 2 HP -- (4) Tension cylinders: 5" BoreEquipped with: -- Conveyor controls -- Shear bar (tapered & serrated)Available NOW!

Selco EB80 Panel Saw This machine has already been dismantled and removed from service. It is ready to load. - 2004 Selco EB 80 - Three air flow tables - 144? cut line - Rear programmable pushing fence - 7 grippers - Auto saw height up to 80mm - 18 hp main motor - Programmable saw carriage speed for cutting and return stroke - PC controller with software

SELCO - EB 70 L, ...CNC Front-Load Horizontal Beam CNC Panel SawSpecifications & Features -- 126" (3,200 mm) Overall cutting length, 2-3/4" cutting height (80 mm saw blade projection); 10 HP main & 3 HP scoring motor. -- Modular roller rear machine table; side aligning device for squaring ripped strips out to 59". -- Variable saw carriage travel speed from: 0 - 164 FPM (0 - 50 MPM). -- Electronically controlled overhead program fence; rack & pinion driven; forward speed of 80 FPM, 131 FPM return speed.Equipped with: -- (6) Clamps (open up to 70 mm - 2-3/4"); (3) are closely spaced in crosscut area & (3) are at equal distance in rip cut area; AC Servo motor drives on both saw carriage & pusher fence. -- PC Controller with: Graphics color monitor & "Assist Line"; LED readout integrated into "high tech" look operator control panel (displays cutting dimensions & patterns), (400) cutting patterns with (50) different dimensions for ea. pattern, self-diagnostic. Machine Features -- 1,500 mm (59") Long crosscut fence (front-to-back); (1) side/crosscut aligner. -- (1) Front mounted air flotation table in the crosscut area (24" x 80"), and (2) front mounted air flotation tables with patented rounded front for moving panel from rip to crosscut position (24" x 59" each). -- 36" Working height; rear of machine partially enclosed for safety.

SELCO - HL-12-LH: Horizontal Baler with Infeed Conveyor• Motor: 20 HP. • Main Cylinder: 6";.• Hopper Opening: 50"; x 28";.• Cycle Time (No Load): 15 Seconds.• System Pressure: 2,000 PSI.• Total Compression Force: 56,556 Lbs.

SELCO HSO-128A50: Horizontal Auto-Tie Baler -- Type: Open end. -- Cylinder: 8". -- Motor: 50 HP. -- Infeed opening: 36" x 28-1/2". -- Bale size: 30" x 40" x Variable. -- Bale weight: Up to 1,200 Lbs (OCC). -- Production capacity: 2 to 4-1/2 TPH. -- Shear blade. -- Hopper size: 36" x 28-1/2". -- Ram face pressure: 103 PSI. -- System pressure: 2,400 PSI. -- Platen force: 120,637 Lbs. -- Cycle time: 11-1/2 Sec (no load).

SELCO - HLO-608-A40: Wide Mouth Auto-Tie Horizontal BalerSpecifications: -- Bale size: 48"; x 40"; x 72";. -- Main motor: 50 HP. -- Cylinder: 8". -- Twister motor: 2 HP. -- Cooler motor: 2 HP. -- (4) Tension cylinders: 5" Bore.Available NOW!

SELCO EB 120 FRONT LOAD, AUTO. PANEL SAW: -- Specifications:173" (4,400 mm) Overall cutting length & 169" (4,300 mm) pull back, 4.8" (122 mm) max. saw blade projection,Main saw blade projection is automatically adjusted according to the stack height selected, ensuring optimum cutting quality. 24 HP (18 kW) main & 3.5 HP (2.6 kW) scoring motor. -- Saw Carriage:Variable saw carriage travel speed from 0 - 427 FPM (0 - 130 MPM), 427 FPM (130 MPM) return speed,Travel speeds obtained by a brushless Servo motor with digital technology ensures a real CNC control without the use of sensors or micros switches. -- Pusher Fence:Electronically controlled overhead program fence, rack & pinion driven, forward speed of 0 - 263 FPM (0 - 80 MPM), return speed of 263 FPM (80 MPM). Equipped with: (7) Self-leveling gripper/clamps (open up to 4.8" / 122 mm), of which (4) are closely spaced in crosscut area and the other (3) are at equal distance in rip cut area.Design of structure and machine logic allow the total ejection of the cut stack of panels beyond the cutting line which facilitates the removal of the trim cuts produced. AC Brushless Servo motor with digital technology under direct monitoring of numerical control drives the pusher fence. -- Operator & Machine Control:Front-end PC controlled with: Color monitor integrated into high-tech look operator control panel (displays cutting dimensions & patterns), virtually unlimited cutting pattern storage capacity.Self-diagnostic, data input by keyboard or possible direct downloading from office PC. -- Machine equipped with:90" (2,300 mm) Long crosscut fence, (2) side/crosscut aligners (automatically positioned & monitored by the numeric control according to the width of the panels to be aligned).(4) Front mounted air float tables with rounded front for moving panel from rip to crosscut position 24" x 79" (609 x 2,000 mm) each;Rear of machine with Modular rollers and (2) longitudinal aligners to accurately position book of panels on rear saw table prior to cutting; partially enclosed with fencing for safety. -- Actual Model is SELCO EB 120L

Select 3620 Sawmill Approx 1100 Hours 68 HP John Deere Diesel Engine 4" Blade (Double cut) 32" Band Wheels Hydraulics include: Log Turner, (2) back posts, (2) dogs, (2) tapers, blade tensioning, head lift, carriage feed Frame: 2"x8" frame and crossbars supported by (2) adjustable legs Blade Lubrication: Automatic electric lube Log capacity: 36" Diameter x 20' Long Setworks: (2) Preset and (2) hold/recall buttons Hydraulic rollers on tapers John Deere block heater Lumber offloading platform Trailer package

74 hp Ecomax T4i turbocharged interim Tier 4 Perkins Diesel Engine. Lift Capacity of 6000 lbs.149 inches overall length without forks. 77 inch Forks. 89 inches overall width. Height to top of overhead guard: 85 inches. 6 inches of mask side shift. 45 degree mask tilt forward. 12 degree mask tilt backwards.

4560SHD grapple, live heel, hydraulic cab lift with cab riser, cat walk, 32” triple grouser pads

4560SHD grapple, live heel, hydraulic cab lift with cab riser, cat walk, 32” triple grouser pads

4560SHD grapple, live heel, hydraulic cab lift with cab riser, cat walk, 32” triple grouser pads