Equipment For Sale

4 Strand 20' long

2007 Wood-Mizer LT300 3400 hours 3 phase Great condition Includes 80 new blades and upgraded steel spindles with new bearings

Wood Mizer 4 head resaw with run-a-round , needs some chain and cylinders put back on it, cuts 6" wide

Complete set up for Sawmill Operation, 2022 Wood-Mizer LT70 Super Wide Hydraulic. Portable. Diesel Engine with 611 hours. Laser, 2022 Wood-Mizer EG200 Edger with 541 hours, Grinder, 2022 20' Deck, 2022 Heavy Duty Conveyor. Single Phase 220, 2022 Transfer Table with Steel Rack, Wood-Mizer BMT 250 Toothsetter, Wood-Mizer BMS 500 Sharpener, Blades and Parts Call 800-459-2148 for more info.

2001 Wood Mizer LT40 Super Hydraulic, Wood Mizer LT40 Super Hydraulic with re-saw attachment with setworks, Replaced the hydraulic motor for the re-saw and replaced the guides. 25HP Electric Motor. Road ready. Can be switched to portable power - costs around $4000-$5000 from Wood-Mizer. Call 800-459-2148 for more info.

Woodcraft cut off saw, In & outfeed,(4) Air Stops.

WOODLAND model K6 stationary traveling band mill with 2" wide blade to saw up to 30" diameter logs x 16' long. Includes edger or 1 man operation. Log stays stationery in 19 degree tilt position and 2" saw travels. Not used since installed. Includes complete hydraulic system and electric motors. Good condition

2022 Woodlandia 200X LogRipper Sawmill. Used for 5 months. No pipe work or infeed deck. Blower is included. #C902

Specifications: 25" x 7" Cap., 7.5 HP, belt-driven cutter head set up with grooving knives for making "bead board" panels; 3/16" max. depth of cut, 8-1/2" min. stock length. -- Variable feed speed up to 23 FPM; 25" x 49" planing table w/extensions, 4-post bed supports for accurate opening via hand wheel adjustments. Complete with: Magnetic controls, dust hood with extraction outlet, and fabricated steel base.NOTE: Tooling will not be separated from the machine. This machine can be equipped with accessories available through WOODMASTER to double-up duty as a Gang Rip Saw, Drum Sander and enable the production of short moulding runs.

2000 Woods BH9000 Backhoe Attachment Was on Kubota M108S Good shape Work ready

WOODS Planer-Matcher - Model 412 motorized, heavy duty planer-matcher with 6 heads. Ideal machine for surfacing dimension lumber or specialty products such as siding and flooring. 6" x 14" capacity, 8 knife heads; 50 hp top, 25 hp bottom, 20 hp sides; 20 hp bottom profile, 15 hp top profile. Item 32203.

Woods 502M hardwood flooring machine

2007 Woodsman 334 Whole Tree Chipper, John Deere 6135FM85 Engine, 7,100 Hours, 20" Capacity, NEW Complete PTO, Powertech, at $11,000.00 Drive Bearing Repacked, Reskinned, Hard Pockets Hard Faced, Drum Bearings Replaced Ready for the Woods. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Woodsman 790 Grinder Power it how ever you want Was Running off a Diesel Power Unit.

2007 Woodsman 337-FC Chipper with 900 Hours, Cat 540 HP Motor, All Factory Updates have been Completed. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Woodsman Model 2018 Chipper SN: 45400956 Cummins 6BTA Automatic feed Works great

2008 Woodsman 332 Whole Tree Chipper, Cummins 365 HP Turbo Diesel Engine ONLY 159 Hours, Twin Disc Clutch, Autofeed System, 20 x 36" Opening, Has 10' Infeed Conveyor, 1,500 Lbs, Tether Remote Control, Ready for the Woods. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Woodtech Cabinet Door Sander

Woodtech Heavy Duty Moulder Models: WTM-330 – 12” wide – available in 4, 5 or 6 head configurations.WTM-260- 10” wide – available in 4, 5 or 6 head configurations. WTM-230 – 9” wide – available in 4, 5 or 6 head configurations.WTM-200 – 7” wide – available in 4, 5 or 6 head configurations. Electrical Requirements: Operating voltage: 460 Volt/60Hz/3 Phase Features Available: Outboard bearings on WTM-330 Pneumatic hold-downs, and side pressurePLC controlled – LCD readout Heavy duty drive motorsBelt driven spindlesAuto Lubrication Optional: Automatic Infeed Table 7000 RPM 1st Spindle - 15 HP 2nd Spindle - 15HP 3rd Spindle - 15HP 4thSpindle - 255HP 5th Spindle - 25HP 6th Spindle - 15HP 480V 3Phase Schneider Electronics

Woodtech HD Horizontal Band SawMax. workpiece size: 300mmThickness of production board: 5–160mmWidth of conveyor belt: 375mmDiameter of saw wheel: 711mmFeeding speed: 0-15m/minHydraulic pressure: 50-60kg/cmSize of saw blade: 185” Length, 2” wide, 1.6mm thick Electrical Requirements: Voltage: 460V/60 HZ/3 phaseFull electrical load: 18.5 KWOverall dimension: 2800L x 2200W x 2000H