Logging Equipment For Sale

540 B John Deere cable skidder in excellent condition, Motor was completely rebuilt , and most of the hydraulic hoses were replaced , new front axle housing and pin and discs, brakes and new fuel tank 800 hours ago, Transmission was gone through approximately 1500 hours ago, New radiator 500 hours ago, All cylinders have been repacked, bushed, and pinned , center pin replaced 300 hours ago, Firestone Forestry tires at 95% , New paint and decals , Everything works, machine is ready to go make money. Comes with new spare custom built radiator, set of Bear Claw tire chains in good condition, new spare winch brake band. Price reduced! MUST SELL! $35,000 Call Eli Hershberger Greentree Forestry (989)875-9329

John Deere 648 G3 for parts. Let us know what you need,

John Deere 653E 8360 hours Mid 90s UC good Hotsaw needs a bearing and some welding Machine does run and operate now but head needs a little work

2021 John Deere 2156G -4800 hours -Tight and dry machine -Under carraige is in great shape Ready to work !!!!!!!

2009 John Deere 748H, Machine is John Deere inspected, 24.5-32 Rubber, 11,000 hrs, runs and work very well. Price $45,000

640D John Deere Grapple skidder, 28L's, runs & works good, normal slack & leaks.

1996 Deere 653E with Processor Attachment, Fabtek 4 Wheel Roller Unit, Engine is a Deere Reman with 4,000 Hours, 19,000 Frame Hours, Hydraulic Pump Done 2000 Hours Ago, Undercarriage is 90%, Enclosed Cab with Heat, Air was taken out of machine, New Swing Bearing and Rotor Motor Redone, Ready for the Woods. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Deere 437D Log Loader, Hours are 11,900, Enclosed Cab with Heat and Air Conditioning, Turntable Bearings Tight, CSI PTD 264 Delimber and Topping Saw, Hydraulic Landing Loader 12,000 Hours, 2016 Barsaw, New Engine Turbo, Ready for the Woods. Length 32 ft 0 in Width 8 ft 7 in Height 13 ft 6 in Weight 32,980 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 Deere 648H Skidder, 10,590 Original Hours, Winch, Enclosed Cab with Radio, Heat and Air Conditioning, 30,5 x 32 Tires 90% Tread, Chains All Around, Center Section Tight, Well Maintained Machine, Ready for the Woods. Weight: 44,000 lbs Length: 23 ft 8 in Width: 10 ft 2 in Height: 9 ft 9 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1996 Deere 548G Grapple Skidder, Winch, Engine was Completely Rebuilt 2000 Hours ago, Frame Hours are 10,600, Tires are 90% 28L x 26, Primex Log max Tires, New Transmission 1 year ago, Needs Sitch on Fan for AC, Good WInch, Ready for the Woods. Operating Weight 21,740lb Overall Length 20.77ft in Overall Width 9.85ft in Height To Top Of Cab 9.88ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 John Deere 643L Feller Buncher with 8,775 hours equipped with multipurpose/universal head. Saw pump recently replaced. Runs great, Ready for work. Operating Weight 36,118 lb Length 20.65ft in Wheelbase 9.92ft in Height Over Cab10.56ft in Ground Clearance 19in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 John Deere 1170E Harvester with 13600 Hours, Head 413. Weight 38,242 lb Width 8.93ft in Length 23.56ft in Height 12.21ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2010 Deere 648H Grapple Skidder, Winch, Center Section Tight, Engine was Rebuilt at 5,000 Hours, Frame Hours are 10,300, Enclosed Cab with Heat and Air Conditioning, Ready for the Woods Length:23 ft 8 in Width:10 ft 2 in Height:9 ft 9 in Weight:44,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

This 748H had been pulling wood every day before we bought it. The engine will need some work, it makes a ticking sound we’re not sure what it is, but besides that the machine is in good condition. All it would need is a newer set of tires and some engine work and this would be a very fine machine. It has 19,342 hours on it. For more information call Kameron 251/242/5493 Tim 251/366/3237 Gavin 601/394/7796 The skidder is being sold from Ala-Miss, Inc. located at 467 St Peter St, State Line, MS, 39362

2021 John Deere 437E, 6000hrs., Ready for the woods!

2017 John Deere 648L

2013 JOHN DEERE 1510E DOUBLE BUNK FORWARDER 6CYL DEERE ROTATING CAB SQUIRT BOOM ONE SET OF TRACKS

2016 John Deere 335D -8613 hours -Hydro saw -Tight and dry -Lights and tires are good Everything works as it should!!!

2016 John Deere 643L, 8,400 hrs., new Reman eng., 28L tires w/dual rings, tight & dry, $75,000

John Deere 437C, Low Hours, Runs Excellent, $40,000