Misc For Sale

Great Condition Recently Fully Serviced Profile Scrapers and Surface Scrapers No Premill/No Buffers

--This machine is in Auction @ https://exfactoryauctions.com/Detail/PM-231011/event/A122024$1. --NO RESERVE! BRIANZOLA SIMCOR 10" W Rotary Embossing Press Specifications: Max. thickness 4" (Depending on head diameter). Equipped with: Slotted table, with 11-1/2” x 3/4” Adjustable left & right material guides. Fixed arbor, with 1 HP - 1,700 RPM - 260/440 V Motor & Adjustable arbor support. 19-1/4” L x Approx. 10” Dia. Motorized smooth steel feed roller synchronized with arbor, Electronically-controlled feed speeds. Complete with: 8” Dia. x 1” W Embossing Head.

New conveyor system that is NEW/NEVER INSTALLED. Everything is ready to load and will take approx two full flatbed trucks to move. See photos for all specs.

--high output machine-- COMIL XPRESS Case Clamp (Automatic Feed Through) Specifications: Working width 180 - 760 mm (7.09" - 29.92"). Working length 250 - 2,500 mm (9.84" - 98.43"). Working height 250 - 1,300 mm (9.84" - 51.18"). Working table height 500 mm (19.69"). Conveyor speed 35 MPM (114 FPM). Beam speed: 18 MPM (59 FPM) Horizontal, 20 MPM (65 FPM) Vertical (Combined). Beam pressure: 1,800 kg Horizontal (3,968 Lbs.), 2,000 kg Vertical (4,409 Lbs.). Equipped with: 31” W x 17’ L x 26-1/2” H Motorized belt conveyor. (2) Vertical beams, with Ball screw drive, Each with (3) Pressure bars, 0.37 kW (1/2 HP) - 2,750 RPM Motor, Rack & pinion drive. Top beam, with 2.9 kW (4 HP) - 1,500 RPM AC Servo motor and Rack & pinion drive. Length & Height Sensors. BIESSE "NC 400" CNC Control, with 6" Color LCD display. Complete with: 3' x 12' Pressure-Sensitive Safety Mat. NOTE 1: Infeed & Outfeed Conveyors Not included. NOTE 2: Machine is currently being fed by 600 V, and Seller states there is a built-in Multi-Tap Transformer converting to 400 V. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

3 available 3 phase power Very low hours

2 available 3 phase power liow hours

Fanuc Robot with Controller Box and Teach Pendant Model: S-420iF Type: A05B-1313-B501 Part #: R98Y03430 Date: 1998.11

Manufacturer’s Specs. Hopper Feed 5 HP 5600 RPM Shaper Rotobelt Sanding Station 103” Triangular Belt Sander Air Blow Off Double Wheel Foiler Single Wheel Foiler

12' Arm 250 Lbs Capacity 4 HP Pump Per owner: head only turns horizonally

There are (7) Table available.

SPX FLOW HANKISON HPRN200 200 CFM Non-Cycling Refrigerated Compressed Air Dryer Specifications: Cap. 200 SCFM at 100 PSIG & 100° F. Max. working pressure 232 PSI. Max. inlet temperature 120° F Refrigerant type R-407C. Equipped with: 200 W (1/4 HP) Refrigeration compressor motor. Stainless steel cross flow heat exchanger. LED Dew point indicator. Dry alarm contact. Timed electronic drain valve. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

Hoffman PU2

KAESER KCF 200 Oil/Water Separator Specifications: Cap. for Screw Compressors: 900 SCFM for Mineral/Turbine oil (Additive free), 600 SCFM for Diesters PAO, & 450 SCFM for Polyglycol. Cap. for Piston Compressors: 600 SCFM for Mineral/Turbine oil (Additive free), 450 SCFM for Synthetic oil. Filling volume 19.2 Gallons. Max. operating pressure 232 PSIG. Equipped with: 30.5 Gallon Container. 4.9 Gallon Pre-filter, 5.4 Gallon Main filter. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

Kuka KR60-3 Robot System KR C4 Control System Kuka Programming Smart Pad Robot Enclosure (3) Heavy duty conveyor racks

The robot arm can move the Layer Picker® in all directions, offering completely new application possibilities. With up to 8 picking or place positions the Layer Picker® Flex-R can be used for both picking for replenishment and batch layer picking at the same time. This means that the Flex-R solution can be used for pallet to pallet picks and negative picking as well. One machine – multiple applications

2005 Marathon Spray Booth 14' wide x 25.5' long x 8'9" tall Booth only no racks, spray guns, paint pots etc included

6” width capacity 8” thickness capacity 30 hp main motor, 1.4 hp feed motor 3 hp blower motor…460 volt 3 phase 559 rpm blade speed digital oiling

This item is in an Auction on exfactoryauctions.com. Go here to view item: http://exf.ac/i6s ROWLEY & HERMANCE Sash Sticking Machine Specifications: Table size 5” x 46”. Equipped with: 3 HP - 1,750 RPM Motor. (2) 2” Dia. x 2” W Serrated upper feed rollers.

Type: Propane/Natural Gas Weight: 1500lbs Max BTU: 2,000,000 Voltage: 230/460V Heating Area: 10750 Sq. Ft Dimensions: 60"L x 110"W x 48"W Built-In Thermostat

Ball Milling machine.