Morbark Mobile Wood Chippers For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 2 of 2
39 Results Found
Sort By 
Recently Added Items
2007 Morbark 23WCL
$179,900
2007 Morbark 23WCL
1997 Morbark 20
$43,900
1997 Morbark 20
2009 Peterson 4300
Call For Price
2009 Peterson 4300
2016 Bandit 1590XP
Call For Price
2016 Bandit 1590XP
$ 192,500

600HP, Advantage 3 drum, Wireless Remote, compressor, rebuilt turbo, serviced, nice machine for age

Forestry First
855-588-7871 ext:1
Call

Call for Price

2009 Morbark 40/36 A3 Drum Chipper with 4,000 hours on a Cat C15 630 HP engine, 4,500 hours on frame. Updated Anvil, newer Infeed chain and paint. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Burlington, VT
NEF Equipment
855-251-2648
Call

$ 415,000

2021 Morbark 30/36 whole tree chipper -1884 hours -Cat Engine -Pintle hitch towed -Extra sets of knives and parts -Factory Engine warranty remaining PRICE REDUCED!!!!!!!

Josh Digirolamo
828-302-7264
Call

$ 94,900

2008 MORBARK 30/36 TREE CHIPPER 5.100 HOURS GOOD DRUM JOHN DEERE ENGINE 500 HP GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

 Dover, NH
Granite Heavy Equipment and Finance
603-953-5983
Call

$ 89,000

400HP, 25" wide drum, original hours

Forestry First
855-588-7871 ext:1
Call

$ 56,000

-400 horsepower John Deere(rebuilt within the last five hundred hours) -new injectors and new injection pump new fuel pump -new head -new belts -hydraulic pumps -replaced all hydraulic valves -new brakes -all new fluids and filters -new paint chipper has remote control to that works -recently put on 12000 pound winch on back

Josh Digirolamo
828-302-7264
Call

$ 195,000

Microchipper, recently installed all new pocket liners and hardware. Fully functional, with remote. Ready to go. CAT C15 540HP Advantage 3 Drum- 12 knife Twin Disc Clutch Air Compressor Light Package

Forestry First
855-588-7871 ext:1
Call

$ 152,900

1994 Morbark 23WCL 23" disk chipper With loader Good condition Includes: extra (new and used) knives, counter knives, & top plate

Mitch Stevens
828-773-6986
Call

$ 155,000

2009 Morbark 30/36 Tree Chipper -1045 Original hours -C13 440 HP -A/C blows cold -Clean tight chipper

Josh Digirolamo
828-302-7264
Call

Call for Price

2007 Morbark Hurricane 18 with loader, Cat CA3116B 250hp T2 Diesel Engine with 1000 hours, Tandem Axle, Hydraulic Front Stabilizer, Large capacity 150 Loader, Dual Rear Stabilizers, Hydraulic swivel Discharge, Flow Control, Tail light guards. Weight: 16,530 lbs Length: 20’ 2” Width: 7’ 4” Height: 8’ 8” 2 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Fairfield, ME
NEF Equipment
855-251-2648
Call

Call for Price

2011 Morbark M20R Track Chipper, Cat 415HP with 5090 hours, Radio Remote, Infeed conveyor, Woods ready. H 11’5” W 8’6” L 22’9” 26,540 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Palmer, MA
NEF Equipment
855-251-2648
Call

$ 350,000

Morbark 40/36 Drum Chipper, Tandem Axle, 800 HP CAT Engine, Good Condition AVAILABLE FOR RENT!!!!

 Hickory, MS
TRAXPLUS
601-452-8791
Call

$ 225,000

Good running machine Disc hardware recently installed Remote

Forestry First
855-588-7871 ext:1
Call

$ 66,000

1998 Morbark 22RXL Disc Chipper -Unkown hours -Cummins Recon engine(600hp) -Needs new inside hood but has replacement for it -Tires are good -No lights On Job Chipping now videos upon request!!!!!! Available as a package with two chip trailers 42x96 rear load CALL FOR PRICE!!!!!!

Josh Digirolamo
828-302-7264
Call

Call for Price

2012 Morbark M18RX 18" Drum Chipper, John Deere 4 cylinder, 4,248 hours, Good condition, Winch, knives. Height:9'4" Width:7'8" Length18'3" Gross weight (approximate):9,550 - 11,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Palmer, MA
NEF Equipment
855-251-2648
Call

$ 44,000

1997 Morbark Model 16 Whole Tree Chipper, Enclosed Cab with Heat, No AC, Single Axle with (4) Tires, New Tires and Brakes, Cummins 250 HP Diesel Engine with 2200 Hours, Nice Running Machine Perfect for Clearing Lots Weight 8,500 lb Height 8.8 Width 7.1 Length 17.11 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Charlotte, NC
NEF Equipment
855-251-2648
Call

$ 149,000

2004 MORBARK 23WCL WHOLE TREE CHIPPER 6 CYL CAT MORLIFT 500 BOOM CAB WITH AIR AND HEAT

 Manton, MI
Lutke Equipment LLC
231-824-9505
Call

$ 43,900

1997 Morbark Model 20 Whole Tree Chipper, 250 HP Diesel Engine, Injection Pump installed over 300 HP , 3900 Hours are Showing, Heat in the enclosed cab, New Starter, New Tires and Brakes, 10 sets of extra knives, Ready for the Woods. H 11’5” W 8’6” L 22’9” 26,540 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Mystic, CT
NEF Equipment
855-251-2648
Call

$ 179,900

2007 Morbark Model 23 WCL Whole Tree Chipper, Caterpillar 3412 1000 HP Twin Turbo Engine. Has 9,000 Original Hours, Heat and Ac, AC needs a Charge, New Computer, New Injectors, All Cylinders recently Repacked, All New Hoses, Ready for the Woods Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Shreveport, LA
NEF Equipment
855-251-2648
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved