Equipment For Sale

Kent Chop Saw | 480V | 3 Phase

480V 3 Phase | 60” inch capacity

Specifications: - Working Width: 15 - 230 mm (19/32 to 9-1/16 inches) - Working Height: 6 - 150 mm (1/4 to 5-29/32 inches) - Spindle Speed: 6,000 RPM - Spindle Dia: 40 mm - Clamping Length of horiz. and universal spindles: 235 mm - Clamping Length of vertical spindles: 160 mm - Feed Speed (variable): 6-24 m/min (19-80 fpm) - Diameter of Feed Roller: 140 mm (5-1/2 inches) - Diameter of Table Rollers: 100 mm (4 inches) - Width of feed rollers: Shaft mounted to 9 inches - Width of rollers opposite left spindle: Stackable to 6 inch Head Power: - First head: 10 HP - Second head: 7.5 HP - Third head: 7.5 HP - Fourth head: 15 HP - Fifth head: 10 HP Additional notes: - Driven roller outfeed table: Smooth Steel - Driven table before first bottom spindle: Serrated Steel - Top Chipbreaker shoes: Dual receding (spring), Smooth - Manual lubrication pump - Tables and fences: Hardened Smooth Chrome Total Weight unskidded: 8,375 lbs.

KENTWOOD M 609X Feed Through Moulder; 6-Head (B-R-L-T-T-B), working cap. 9-1/16"" x 6". Head sequence & Spindles: -- Bottom 10 HP, right 10 HP, left 10 HP, top 20 HP, top 20 HP and bottom 15 HP motor. -- Spindle dia.1 13/16" with cutterhead speed of 7,200 RPM. -- All spindles equipped with mechanical digital readouts. Mechanical readouts for pressure elements and chipbreakers.Electric brakes on spindles 2 through 5, Cutting circle of vertical spindles: 125 mm to 200 mm (4,7" X 7.8") Cutting circle of horizontal spindles: 125 mm to 200 mm (4,7" X 7.8"). Feed works: -- Cardan feed-works drive system with pneumatic pressure rollers, Inverter driven 5 HP feed system with feed speeds of 20 - 98 FPM. Infeed. -- Complete with: Full width driven bottom in-feed roller before first head, Serrated steel feed rollers before top horizontal head.Rubber coated feed rollers after top horizontal head, (2) Rollers above and (1) in the table prior to first bottom spindle; (2) additional powered rollers in the table. -- In-feed table 2M (72"), chromed tables and fences. Includes: -- Central lubrication, manual table lubrication pump. -- Side pressure roller mounted to infeed table, Short stock attachment at right spindle for short part, -- Sound enclosure and Interior cabin light. Note: Floor space: 77" W x 166" L x 68" T, Machine weight: 10,800 lbs.

Kenwell Chamfer Machine

2014 Kenworth T-800 Cab/ Chassis Truck, Tri Drive, with all drive axles, with full locking diffs, Differentials are Tripple Lockers,69K, 4.30 Ratio, Heavy Haul Spec Truck has ISX Cummins 575 HP, Eaton 18 Speed, Super Clean Cab, Truck has Dual steering Boxes, 20K Front Axle, Good Paint 407,400 Miles. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Kenworth T370 Dump Truck, 170,000 miles, 33K GVW (requires CDL), Air brakes8.3 Paccar/Cummins Diesel Motor, 6 Speed Allison Auto Trans, Near new Toyo rear tires, Good condition Michelin front tires, DOT inspection through 11/2021, All glass is crack free, wireless back up camera, pintle hitch, electric to rear, Godwin dump body new in 2019, currently has barn doors and steel side extensions on, can easily be removed and spreader gate re-installed, just had service at MHC Kenworth.Power locks, exhaust brake, power passenger side window, am/fm radio, air drivers seat, dual diesel tanks.Well maintained. Drives great, 100% ready for use.

2018 KENWORTH T680 TRI AXEL DUMP TRUCK 350,000 MILES PACCAR MX13 455 HP ENGINE AUTOMATIC TRANNY DOUBLE FRAME NEW DUMP BODY NEW TIRES EXCELLENT CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2003 Kenworth Mdl T802 Tandem Axle Fuel Service Truck, Eaton Fuller 8LL Transmission, CAT G10 Engine, 88,120 Miles, 9,552 Hrs, Has Fuel-Oil Tanks, Dispensing Pumps, & Air Compressor

Kenworth T880, 480,000 miles, 10 New Tires, $65,000

1990 Kenworth T800 Detroit 60 series Road ready REDUCED PRICE

Lemco Knuckleboom, Log Trailer, New Tires, 3 Squirt Boom, Contr. Rotation Loader, 46" Pole Bypass, Standard Shift, Paccar 13 spd Transmission, 535 HP, 20,000 Front Axle Weight, 52,000 Rear Axle Weight.

2013 Kenworth T-800 Logging Truck, Original Hours are 240,364. Extenda Boom, Rotobec Elitz AT-SP Built by Hubler Brothers, Pennsylvania Ready for Work, Great Truck! Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1999 Kenworth T300 Cat C7 diesel Allison trans Motor and engine reman Double frame Truck was painted black Low pro tires and rims Tires and rims are New exhaust system New 18 foot flat bed with beaver tail Headache rack Truck has leather interior LED lights Truck has gooseneck welded in

2005 Kenworth W900 ISX Cummins 10 speed 1.6 million miles High miles but well taken care of Road ready

2016 KENWORTH W900 TRACTOR 692,191 MILES ISX ENGINE TURNED UP TO 605 18 SPEED NEW TRANNY WITH WARRANTY 2 NEW REAR ENDS WITH WARRANTY RECENT EXHAUST AIR TO AIR RECENT TURBO RECENT CLUTCH 46K REARS FULL LOCKERS 4 VALVE WET SYSTEM WITH RELEIF VALVE 2022 PELETIER LOG TRAILER FRONT AND REAR LIFT 2022 ROTOBEC 910 ELITE LOG LOADER FINANCING AVAILABLE WITH NO MONEY DOWN GRANITEHE.COM

2016 KENWORTH W900 LOG TRUCK 106,918 ORIGINAL MILES 550 CUMMINS ENGINE 18 SPEED FULL LOCKING REARS SERCO 8500 LOG LOADER VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

Ready to work Kenworth Log Truck, Grapple Truck. Has a Lemco 1250 Loader on the rear. Truck is extremly clean.

2003 KERSHAW SKYTRIM 5000 HOURS DUETZ ENGINE 2 SPEED TRANNY 28,400 LB 75' BOOM EXTRA BLADES 28L-26 TIRES FULL CAB MACHINE IS USED TO TRIM TREES FOR UTILITIES FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

Keystone Chop Saw with in & out feed and waste conveyor. #00896