Equipment For Sale

2023 CMI C300 Mulcher -590 hours -Warranty -Like new Turn Key

CUMMINS B4.5 STAGE V (173HP) 4 PUMP HYDRAULIC SYSTEM 12 VOLT ELECTRICAL SYSTEM 78.5 GAL FUEL TANK 29 GAL HYDRAULIC RESERVOIR SEALED AND GREASED, D3 CHAIN 22” SINGLE GROUSER TRACK PADS WITH MUD HOLES TWO SPEED HYDRAULIC MOTORS PUSH BUTTON CAB LIFT BACK UP CAMERA AM/FM BLUETOOTH RADIO HYDRAULIC OIL FILLER PUMP AIR SUSPENSION SEAT ROPS/FOPS/OPS CERTIFICATION 12 VOLTS DC OUTLET ELECTRICAL SYSTEM WITH BREAKERS IN DASH STANDARD 15,000LB WINCH FAE 140U 200 MULCHING HEAD

Complete, state of the art, drying systems that are custom manufactured for your application, location and production. Systems are designed to be fueled by green wood waste. Sized from 75-600 cubic yards per hour. Contact CMS for more information. - ?Furnace systems complete with fuel bin, dampers & controls - Material infeed & outlet airlocks - Complete ductwork systems - Air recycling systems - All controls & instumentation - Complete system integration

This machine is in good working condition and can be inspected under power. Specs (to be confirmed): - Electric spindle 18.1 HP - X-axis stroke 145.66î - Y-axis stroke 82.67î - Z-axis strke 13î - Working area 145.66î x 68.90î - Automatic tilting head - Telescoping spindle extension for surface polishing - (26) ISO 40 tool holders at rear - Bar code reader for program interface

Coe 47' x 26' Package type dry Kiln with Controls, 1989 Hurst gas boiler 150 PSI, 6900# Steam Per Hour S/N 51000-750-3, Condensate Tank & Pumps & Electrical. can Buy as a Package or Seperate the Hurst Boiler.

Coe 6' x 9" Double Cut Air Strained Band Mill Model# 972 Serial# 114

COE 249D Veneer Lathe with the following: -- 27" maximum log diameter, 110" knife length. -- 1484 Veneer Lathe Big Bar. -- 1390 Veneer Lathe Core drive. -- 3 to 1 inner drive ratio. -- Capable of peeling 35 cubic meters per hour. -- This COE Veneer lathe line was completely rebuilt and installed in 2006. The lathe was operated less than one year and is reportedly in excellent condition.

COE 4 Ft. Veneer Peeling Line with the following major components and features: -- Log cut-off saw. -- Geometric lathe charger. -- Dual spindle 4' COE Model 263 Lathe: &#9679 Diameter of outer spindle 7" &#9679 Diameter of inner spindle 4" &#9679 Max. swing 48" &#9679 Knife length 56" &#9679 Lloyd controls including motor starters &#9679 Main drive DC-AC 165 HP/200 HP -- Veneer conveyor to clipper. -- Pneumatic Clipper.ALSO AVAILABLE: VENTEK Veneer Scanner (no computer included).NOTE: Veneer stackers not included.

Coen 230 Combustion Wood/LP Gas Fired Burner

COLUMBUS MCKINNON - E-915, ...Tire Shredder -- Motor: 250 HP. -- Control panel: 120 Volts. -- Feed opening: 28" x 49". -- Knives width: 2-1/16" (double). -- Weight: 33,000 Lbs. -- Loaded onto Truck.

Comac TAG 100 Package Kiln 30'x36' Gas fired with control room Looks like 70 MBF with 4/4 lumber

Photos coming Compact DDM6 Profile Canter Line Double Length Infeed Production: 27,000 Logs/ 24 hours, 360 FPM (2x6), 500 FPM 2x4 Infeed belt conveyor V flight scanning conveyor without the scanner and optimization system One pass small log processor Outfeed belt conveyor #1 Outfeed lifting belt conveyor #2 Outfeed belt conveyor #3 Lumber landing table Motor Control Centers (MCC) Programmable Logic Controller (PLC) - obsolete

2002 Comact 18' x 10' x 10' Wave Log Feeder

ComacT Edger, 2-Saw Movable, All Motors - $32,000 - Call Jeff for more info at 574-370-5050

Denis 948 Gang Saw

MLS Number 11922341 Denis Comact 948 Gang Saw Edger 6" infeed table Spare guides

COMEC - LON-LS, ...Horizontal Belt SanderSpecial design for sanding of straight or curved solid wood parts such as: Chair legs, chair backs and other similar & difficult-to-sand parts.10 HP Belt driven motor; 12" dia. contact drum for 10" wide x approx. 140" long abrasive belt; air tracking & belt tensioning. -- Stock is fed over the contact drum with an overhead variable speed, pneumatically tensioned feed wheel. -- Sander belt power: 6.6 kW (9 HP approx.) - 220/440 V, 60-Cy, 3-Ph motor.

COMEC - FAS/2, ...Corner Milling MachineCOMEC FAS is a dedicated milling machine with: Inclinable heads for machining the corner of chair seats. Specifications: -- (2) Heads with: 5.5 HP motor and 40 mm spindle shaft. -- Max. cutter size: 150 mm (5.9"). -- Tilting of milling units: 20°/ +45° in horizontal plane. -- Fixed left hand column to support head unit. -- Max. working height: 200 mm (7.8").

COMEVA - CUBE 3, ...Edgebander (Single Phase)The CUBE 3 from COMEVA is designed to be a very compact "every day" Edgebander. The CUBE 3 Edgebander is operated through a PLC control system with a touchscreen. The machine handles panel thicknesses of 0.315" up to 1.77" (8 mm to 45 mm), The coil feed accepts Edgebanding from 0.4 mm to 2 mm thick; strip material can be hand-fed.Equipped with: -- Heated infeed fence for optimum glue penetration. Large capacity Teflon coated glue pot (2.64 Lbs). -- Single motor End Trimming station -- Top & Bottom Trimming -- Top and bottom Buffing. -- Feed speed is variable between 9.8 & 23 FPM (3 - 7 MPM); feed chain pads with replaceable rubberized surface inserts. -- Rubberized holddown rollers with ball bearings for low friction and long life. Work stations: -- Pneumatically operated guillotine for up to 2 mm thick banding, followed by spring loaded double pressure rollers. -- Single front/rear trimming unit, 0.3 HP motor. -- Top & Bottom trimming units, (2) 0.5 HP motors. -- Top & Bottom buffing station, (2) 0.16 HP motors. -- Complete with: Safety enclosure protects the operator from noise and debris. Engineered & Manufactured by COMEVA S.L, in Spain.Includes: Owner’s Manual with mechanical & electrical schematics and parts breakdown; covered by a 1-Year Factory Warranty on parts.

COMPAIR - LeROI WM-100SS II WQ, ...Rotary Screw Air CompressorSpecifications: -- Main motor: 100 HP -- Working pressure: 125 PSI -- Capacity: 445 CFMNOTE: THIS MACHINE REQUIRES AN EXTERNAL COOLER Note: This machine has (21,311) hours on it.