Equipment For Sale

DENRAY 2896 Down Draft Sanding Table: Extra long 28" x 96" table with a 36" working height. -- Rated at 3,500 CFM with 2 HP single phase motor. -- This model features the New Tube Filtration System which cleans with a 99% capture rate at 1 micron. -- Includes: (4) Swivel casters, including (2) that lock in place. -- No duct work, no loss of conditioned air. -- Comfortable 1-1/8" thick hardwood frame worktable with 3/4" thick MDF board and rubberized surface. -- Available options include; Exhaust Muffler to reduce sound 10 - 12 dBA, Magnehelic Gauges, HEPA Filter Banks, 3-Sided 20" Shields and Odor Control Filters. -- Also available in 230V, 460V and 575V, 3-PH.These tables are popular with small to medium shops to incorporate (2) operators side by side or for use on longer products.

DENRAY 9600 B Down Draft Sanding TableExtra large 48" x 96" table; Comfortable 36" working height. -- Powerful system with 4,800 CFM rating. -- 5 HP Motor with magnetic starter. -- Space-saving self-contained unit w/built-in dust drawers and high efficiency cartridge filters. -- No duct work, no loss of conditioned air. -- 1-1/8" Thick hardwood frame worktable with 3/4" thick MDF board and rubberized surface. -- Fully enclosed unit. -- "Self-Cleaning" System with push button start to force compressed air from a storage tank into the filters and force dust into the dust drawer. -- Floor level air exhaust that can be directed away from operator. -- Quiet operation with only 82 dB. -- Available options; (4) Swivel casters with (2) that lock in place, Auto-Self cleaning timer or muffler.

DENRAY 7200 B DOWN DRAFT TABLELarge 48" x 72" Table. -- 3,900 CFM rating after filters. -- 5 HP Motor w/magnetic starter. -- Space-saving fully self-contained unit: No duct work, no loss of conditioned air. Contains (2) cartridge filters that clean to 0.5 microns. -- Comfortable working height 36". -- 1-1/8" Thick hardwood frame worktable with 3/4" thick MDF board and rubberized surface. -- "Self-Cleaning" System with push button start to force compressed air from a storage tank into the filters and force dust into the dust drawer. -- Floor level air exhaust which can be directed away from the operator. -- 84 dBA Sound level. -- Options include; Timer to automatically clean filters without operator, (4) swivel casters (2) that lock into place, noise reducing muffler (Reduces volume by 10 to 12 dBA),Unit also available in 220 V single-phase.

DENRAY 3660B Down Draft Sanding TableConvenient 36" x 60" table with a 36" working height with DENRAY's Pulse jet Cleaning System. -- Rated at 3,400 CFM for fast, easy removal of dust. -- 2 HP 3-phase motor. -- Space-saving self-contained, double filtration unit with integrated table top surface filter and bottom filters on all (4) sides. -- No duct work, no loss of conditioned air. Sound level 74 dBA. -- 1-1/8" Thick hardwood frame worktable with 3/4" thick MDF board with rubberized surface. -- Also available in 115 V and 220 V single phase

DENRAY 3672 B Downdraft Sanding Table.Convenient 36" x 72" Table, comfortable 36" working height w/ DENRAY's Pulse Jet Cleaning System. -- Rated at 3,500 CFM. -- 2 HP, 3-Phase motor with magnetic starter. -- Self-contained system with 80/20 cartridge filters which clean with a 99.95% capture rate at .5 microns. -- 1-1/8" Thick hardwood frame worktable with 3/4" thick MDF board and rubberized surface. -- Space-saving design with no duct work, no loss of conditioned air. -- Sound level at 78 dBA. -- Available options include: Exhaust chimney, exhaust mufflers to reduce sound level to 10 - 12 dba, casters and filter cleaning auto timer.

DENRAY 9600 Down Draft Sanding Table: Extra long 48" x 96" table with a 36" working height. -- Rated at 4,300 CFM with 3 HP motor. -- This model features the Tube Filtration System which cleans with a 99% capture rate at 1 micron. -- Includes: (4) Swivel casters, including (2) that lock in place. -- No duct work, no loss of conditioned air. -- Comfortable 1-1/8" thick hardwood frame worktable with 3/4" thick MDF board and rubberized surface.

DAC-1200 - DENSACAN: Can DensifierThe "DAC-1200" is fully automatic and will run continuously as long as cans are fed.Features -- Automatic shut off when empty. -- Capacity in pounds/hour. &#9679 Aluminum: 1,200 Lbs. &#9679 Aluminum: Flat 2,000 Lbs; Ferrous: 2,500 Lbs. -- Biscuit description; typical size: 11" x 13" x 9". -- Motor: 20 HP.

DENSACAN - DAC-3000: Can Densifier Does not include Conveyor or Surge Hopper -- DENS-A-CAN "DAC 3000" Densifier is specifically designed to densify ALUMINUM & STEEL food or beverage containers into high-density interlocking biscuits that meet the aluminum & steel industry requirements. -- The "DAC 3000" will also process: Full beverage containers; trim stock; aerosol cans; and like materials. Along with the high-density biscuits, the "DAC 3000" will process tin food containers into low density biscuits approved by the detinners. -- The "DAC 3000" is: Designed for the larger processor of cans; minimizes strokes; gets maximum production with fewer moving parts. Like all DENS-A-CAN equipment, it is: Simple to operate; highly reliable; easy to maintain. -- “STATE-OF-THE-ART"; Engineering:• Fully automatic with manual override switches.• (2) Convenient density setting options from the control panel: one for aluminum, the other for steel cans.• Automatic biscuit size control: Automatically adjusts for whole, mixed, or flat cans.• Agitator system breaks up can bridging even from the largest of surge hoppers.• Thermostat controlled heater & self-contained cooler/filtration system.• High & low oil temperature protection.• Latest electronic & hydraulic controls utilizing tie rod cylinders.• TEFC Motors & sealed electrical enclosures.• Reinforced Heavy-Duty compression chamber with: Tongue & groove tracking system that eliminates cylinder rod lift.• 4-Edged hardened tool steel cutter bar.• All components are easily accessible with fewer moving parts and sensing components; wear areas are bolted for ease of service.• The "DAC 3000" Direct Charge Densifier is perfect for the larger processor & material recovery facility that needs a fully automatic high production Densifier.

DEPENDABLE - 203, ...Cold Press40" x 102" Cap., side loading on 102" sideSpecifications: &#9679 (3) Split upper platens: 34" wide x 40" deep; split platens can be interlocked for single platen operation. &#9679 45" Max. daylight opening with 12" down stroke hydraulic cylinders. &#9679 (6) Rows of pop-up rollers in machine bed for loading & unloading. &#9679 (3) 7-3/4" Dia. hydraulic press cylinders from the top; (1) per platen. &#9679 Hydraulic power pack with 10 HP motor mounted on floor at end of Press.

Designed Automation 4 Strand Log Deck

7 Chain Unscrambler with Rollers

Design Automation 6' 4 Arm Stacker W6x78x56' Live Roll & 45 x 21' 2 Strand Stick Deck with Electric Drive. Softac Tally System

Design Automation 6' Manual Sticker Stacker, 4 Strand Infeed Deck, Unscrambler with Even Ender, 6' Stacker with Stick Placing Platform & roll Outs. In Place Not Powered.

Desjardins Shingle Mill - Desjardins Shingle Mill built in 1980s - 40 HP 3 phase motor - Conveyor - Grinder for the blades. Includes an edger and extra blade Call 800-459-2148 for more info.

DETEL M-2H DOUBLE ROW LINE BORER.(2) Line boring heads of (25) spindles each on 32 mm centers, drills from the bottom up.Equipped with: -- (2) 2 HP motors drive spindles at 3,400 RPM. Hand crank adjusts the opening between heads from 5" - 25" w/mechanical digital readouts, drilling depth up to 2" -- Hardened steel gears that are pressed onto the spindle shafts, 120" back fence with (4) large flip-stops. -- (2) Pneumatic index pins with independent switches for sequence boring on long side panels. -- (2) Overhead pneumatic hold-downs. -- Complete with standard screw-in 10 mm collets; air/electrical controls, pneumatic oiler, and foot pedal actuator for clamping & boring cycle.Optional: Dust Collection on each head. Quick change collets.

DETEL M-2H Line Boring Machine.(2) Line boring heads with (25) spindles each on 32 mm centers, drills from bottom up.Equipped with: -- (2) 2 HP motors drive spindles at 3,400 RPM. Hand crank adjusts the opening between heads from 5" - 25" w/mechanical digital readouts, drilling depth up to 2-1/2". -- Dust Collection on each head. -- Hardened steel gears that are pressed onto the spindle shafts. -- 120" Back fence with (4) large flip-stops. -- (2) Pneumatic index pins with independent switches for sequence boring on long side panels. -- (2) Overhead pneumatic hold-downs. Complete with: -- Standard screw-in 10 mm collets; air/electrical controls, pneumatic oiler, and foot pedal actuator for clamping & boring cycle.

Detel M-2H Boring Machine (2) 25-Spindle Boring Heads

150kw Diesel Genset Generator - Back up for current generator but not used - Was operational prior to my purchase - Not hooked up to a bulk tank for demo - Skid mounted - 3 phase 440 v Call 800-459-2148 for more info.

671 Diesel Model PTA11112

2004 Detroit Diesel MTU 660 KW Generator Skid Mounted 277/480V - 60Hz 540 Hours Digital Controls