Equipment For Sale

Franklin 170 Grapple Skidder, $18,000

1999 Franklin 170 Cable Skidder 6.9 John Deere Power Tech 180 HP 7800 hours Tranny good Engine good. No blow by Center section tight New steering cylinder bushings New brakes Serviced regularly 24.5-32 tires at 50% New chains on front Runs and operates great

1991 FRANKLIN/TREE FARMER C7 CABLE SKIDDER MTER READS 4,302 HOURS 300 HOURS ON ENGINE REBUILD TURBO WAS REPLACED 6 MONTHS AGO 50HP INJECTORS IT HAS DOORS VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

On job working

1989 Franklin 170 Cable Skidder Runs and pulls strong Good rubber Using daily

FRAVOL VSR TOP & BOTTOM TRIMMERSpecifications: -- Edgebanding thickness 0.4 mm to 3 mm, 16 mm (0.62") to 60 mm (2.36") panel thickness capacity. The rough trimming function uses vertical copy pads and one disc copier between the two cutters in a horizontal position, allowing 0.4 mm to 3mm radius edge rough trimming without replacing the cutters. Panel working height (thickness) is from 16 mm to 60 mm.Equipped with & Features: -- Two 12,000 RPM motors complete with braze welded hard metal cutters Ø 50x16- Z6. Your choice of profiles R1; R2; R3; 5°; 30°. -- The machine comes with a new, patented worktable that provides smooth panel sliding and extremely flexible edging without using jigs. -- Sliding on nylon blocks allows perfect cleaning of the panel melamine surfaces.

FRAVOL - VSR, ...Top & Bottom TrimmerSpecifications: -- Edgebanding thickness: 0.4 mm to 3 mm; 16 mm (0.62") to 60 mm (2.36") panel thickness capacity. Rough trimming function uses vertical copy pads and (1) disc copier between the (2) cutters in a horizontal position; allows 0.4 mm - 3 mm radius edge rough trimming without replacing the cutters. - Panel working height (thickness):16 mm - 60 mm.Equipped with & Features: -- (2) 12,000 RPM Motors with: Braze welded hard metal cutters; Ø 50 x 16 - Z6. - Choice of profiles: R1, R2, R3; 5°; 30°. -- Machine with: New, patented worktable that provides smooth panel sliding and extremely flexible edging without using jigs. -- Sliding on nylon blocks allows perfect cleaning of the panel melamine surfaces.

FRAVOL SMART S600-23 Edgebander w/Pre-Mill & Corner Rounding:Main Specifications: -- Edge & Workpiece Capacity: 0.4 - 8 mm (0.016 - 0.315") edge; 10 - 60 mm (0.394 - 2.362") panel thickness; -- 140 mm (5.512") min. panel length and 100 mm (3.937") min. panel width. -- Feed-speed, 14 or 18 MPM (46 or 59 FPM.)Front-End Equipped With: -- Pre-Milling Station (RT/S), (2) motors @ 1.1 KW (1.5 HP), 12.000 RPM, LH & RH rotation w/pneumatic programmable jump control for chip-free and clean panel edges. Standard equipped with Dia. 60 mm x 64 mm H, with diamond inserts. -- IR Panel Heat Lamp: Improves gluing bond especially during cooler ambient temperatures and humid conditions. -- Automatic Edge magazine: For strips up to 8 mm & coil stock up to 3 mm thick PVC. -- Duo Gluing System: For regular granulate Hot Melt (EVA) and easy conversion to PUR glue. "Teflon lined" glue tank with bi-directional glue roller. Automatic temperature reduction during stand-by time. Glue tank has quick release system for maintenance or quick change to a different color or glue type. -- Side Pressure Section: (3) Pressure rollers, (1) motorized, (2) idle, pneumatic pressure control and programmable NC-positioning servo motor.Work-stations: -- End Trimming (INT 2/S): (2) motor @ 0.50 KW (0.70 HP) 12,000 RPM, automatic pneumatic chamfer 0° - 15° or total exclusion from control panel. Glides 45° on prismatic linear hardened steel guides. -- Trimming Unit (RF-S/S): Top/Bottom flush/bevel/radius milling unit, (2) motors, 0.73 KW (1.00 HP) 12,000 RPM. Pneumatic remote tilt in (2) positions, postion-1 for radius and thin edges up to 0.8 mm trimming, position-2 for flush trimming up to 8 mm edges.Equipped with banding thickness gauge block feature for quick and easy set-up/changeover. Includes 1-axis NC servo control motors for programmable change-over from thin to 8 mm solid wood edges or incremental re-positioning of the cutter head. -- Corner Rounding Unit (SYNCRO 1): Compact and easy to set up for leading & trailing edges, (1) motor 0.22 KW (0.295 HP) 12.000 RPM, electronically synchronized. Working capacity, min. 10 mm, max. 60 mm panel thickness. -- Profile Scraping Unit (RB/S): Top & bottom radius scraping for PVC - ABS edges. Heavy construction to eliminate vibrations and guarantee superior edge quality. Air blow-off jets and chip collection box. -- Clean Spray System: Top/Bottom spray nozzles applies edge cleaning solvent prior to buffing. -- Glue Scraping Unit (RC/S): Top & bottom pneumatically operated glue scraping on flat panel surface to remove potential glue squeeze-out that otherwise would coat the cloth buffing discs. -- Buffing Station (GSI/S): Top/bottom (2) motors, 0.09 KW (0.125 HP) 2,800 RPM, manual, horizontal, vertical and tilting adjustment -- Hot Air Unit PHON (GP/S): Top/bottom hot air blowers to restore PVC color after scraping. Electrical power 2,000 Watt, 0° to 600° C temperature adjustment.Complete With:• PLC Program Control, with 10.7" col

MLS Number 12709353 2007 Freightliner M2 Flatbed Truck 271,372 miles Mercedes Benz engine Allison 6 speed automatic Not CDL 27'3" bed Air brakes spring suspension

2019 Freightliner 122SD X15 500 HP 18 Speed Air Ride

1993 Freightline Day Cab Detroit 60 Series New 13 speed tranny New tires Nice Truck

It has a C 12 engine Ready to go to work! Call today!!!

2004 Freigtliner Columbia Day Cab New transmission New tires Heat/AC work Road ready Mercedes engine 10 speed 727,911 miles

2010 Freightliner M2 Crane Truck National 400B Crane New Cable 49648 Miles

New take out air suspension seats with base from 2022 Freightliner

2021 Freightliner M2 Bucket Truck Odometer38,296 miles Stock#1367 VIN 1FVACWFD1MHMR2977 Engine Make- Cummins Engine Model-6.7L ISB 240 Engine HP -240 Fuel Type Diesel Drivetrain Trans Make- Allison Trans Model- 2500RDS Trans Speed- Auto Boom Make Altec Boom Model LR7-60E70RM Boom Serial# 1120FF13027 Capacity/Full Reach 75' Boom-Type Rear Mount Class 7 Delivery is available at the buyer’s expense

2015 Cascadia Day Cab DD15 Engine DT 12 Transmission 538,114 Miles

2015 Cascadia Day Cab DD15 Engine DT 12 Transmission 551,638 Miles

2014 Freightliner Coronado with 628,000 miles. New DD 15 complete crate motor with less than 50,000 miles. New Crate Motor installed by freightliner of sav, with full warranty, new clutch installed, new spring bushings in rear, new power divider less than 3 months ago. Brand New Fifth Wheel and A/C. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Frick Gang Edger (no motor) 636 S/N 160 with Gang of Blades.