Equipment For Sale

Virnig RBV72-HF33 Hi-Flow Brush Cutter, 72 Wide, 6 Material, Rear Roller

VIRNIG RBV72-33 Rotary Brush Cutter, 72 Wide High Flow, Rear Roller, 4 Capacity, Three Blade,

2022 Virnig MSHV84 Light Material Snow Bucket, New W/Bolt On Cutting Edge, Multiple available.

Virnig 72" Heavy Duty Low Profile Dirt Bucket W/Bolt On Cutting Edge

VIRNIG RRG78 V60 Root Rake Grapple, 78 Wide, Replaceable Teeth, Cylinder Guards. Please call for More Info and Sizes

New 2020 Virnig BBV72 Open Front Deck Rotary Cutter, 16-25 GPM Flow, Three Blade System, Cut and Remove Trees Up To 3" (6" Model Available). This is a Heavy Duty Built Cutter. Works Great on Grass and Brush. Fits any Universal Skid Loader Mount.

Visionary Machine Concepts CS20 Up Cut Saw S/N 0498023

Visionary Trim Saw

VITAP LINEA 42 Line Boring SystemSpecifications: -- (2) Drill heads of (21) spindles ea., drills from bottom up, ea. support with 2 HP motor and (21) spindle boring block w/panel support mounted on top; -- Drills panels from 100 - 3,000 mm in length, and 100 - 950 mm in width. Complete with: -- Digital readouts for boring blocks, 2,000 mm bar scale fence with (5) adjustable flip stops. -- (2) Moveable overhead pneumatic holddown cylinders, foot pedal for clamping & boring cycle.

Vitap Forma Boring Machine 21 Vertical Spindles 21 Horizontal Spindles Approx $1000 worth of carbide bits DUAL LINE machine and there are (2) vertical lines of 21 spindles each for a total of 42 ...... PLUS an additional single line of 21 horizontal spindles!

VITAP - RC 92, ...Semi-Automatic Top & Bottom Edge Trimmer: New, Never Used!Specifications -- For straight & curved edge banded panels. -- Max. edge thickness: 3 mm (0.12"). -- Panel thickness: 10 - 60 mm (0.39" - 2.36"). -- Table size: 27" x 31".Equipped with: -- (2) 0.55 kW (0.7 HP) - 12,000 RPM Spindle motors. -- Large dia. guide bearings to ensure precise trimming of edges.NOTE: Sold "As Is" without Warranty!

VITAP - ALFA 27: Construction Boring Machine27-Spindle boring head on 32 mm centers; drills vertically from bottom-up and head rotates to horizontal position for edge boring; head rotation is pneumatic with switch control. -- 2-3/4" Max. drilling depth; 2-1/2 HP - 2,800 RPM motor; pneumatic drill head advance with speed control; head height adjustment with mechanical digital readout; 34" x 20" table size; max. workpiece width 31-1/2". -- Equipped with: Left & right-side fences for construction boring; (3) pneumatic holddown clamps; 118" line boring fence with: (4) Flip stops; pneumatic foot pedal control.

For pre-glued PVC, veneer, & melamine laminate coil stock; 0.4 - 1.2 mm edge thickness; up to 35 mm panel thickness cap., automatic coil feed. -- Equipped with: Electronically controlled temperature setting for hot air blower; 3,000 Watts for up to 650° F temperature; (1) Min heat up time. -- Guillotine type front & rear end trim (with fast speed, flying knife); top & bottom flush trims with single motor drive to cutterheads. -- Overhead belt type feeder; 16 FPM feed speed. -- Mounted on machine base with panel support table.

VITAP ALFA - 27: Construction/Line Borer27-Spindle boring head on 32 mm centers; drills vertically from bottom-up and head rotates to horizontal position for edge boring; head rotation is pneumatic with switch control. -- 2-3/4" Max. drilling depth; 2-1/2 HP - 2,800 RPM motor; pneumatic drill head advance with speed control; head height adjustment with mechanical digital readout; 34" x 20" table size; max. workpiece width 31-1/2". -- Equipped with: Left- & right-side fences for construction boring; (2) pneumatic holddown clamps; 118" line boring fence w/flip stops; pneumatic foot pedal control; magnetic starter; overload protection.

Vitek Stroke sander Approx 8 foot capacity

Vollmer Finimat Circle Saw Sharpener 120V 3 Phase

Recently Removed From Service Good Condition Maintained Regularly

Recently Removed From Service Good Condition Maintained Regularly

Works well Taken out of service and stored

Vollmer FS73F Grinder, ready to be moved!