Equipment For Sale
10585 Results Found
Sutorbilt Legend 5M -- Standard, medium-pressure -- Diameter (inlet/outlet): 4" NPT -- Shaft size: 1.125" -- 2,350 Max RPM
GARDNER-DENVER 2BV5121 15 HP Liquid ring pump:11.4 kW (15 HP), Volume flow 360 CFM; operates at a low noise level of 74 dBA.Specifications: -- The "2BV5121" series are compact plug-and-play systems for easy on-site installation; pumps are air-cooled, 100% oil-free, and do not require additional water during operation. -- Due to contact-free compression, they are virtually wear-free in operation and require no periodic maintenance. -- The patented discharge-air cooling system ensures that the pumps will not heat up by more than 15K above room temperature; pumps work reliably in continuous operation and are steam resistant & insensitive to condensation of the pumped air. -- Vacuum power units of the "2BV5121" split type are standardized liquid ring pump circulation systems with patented exhaust air cooling for large volume flows. -- A considerable amount of the water contained in the cool exhaust air condenses, remains in the system, and is available as operating water; as a result, many applications no longer require additional operating water.(2) Available, buy both for less than $9,000.
Air compressor was used in food processing and is very clean, variable feed, Seller will load on your truck, ref # 188, Call 931-797-6284
Laminating Rolls: 61" (155 cm) roll face with thermally conductive high release silicone surface; upper and lower main rolls internally heated; temperature controlled by state-of-the-art infrared sensors and digital PID controllers Laminating Opening: 1.5" (3.8 cm) maximum opening controlled with dual air cylinders. Laminating Material Uses heat activated and pressure-sensitive materials 0 - 55" (0 - 140 cm) wide on a 3" (7.6 cm) ID core Laminating Speeds 0 to 14.5 fmp (0 to 4.5 mpm) Post Lamination: Fanless cooling system provides uniform, filtered air for thermal shock without exposure to dangerous fan blades. Vinyl Transfer Complete roll to roll transfer, lamination, and edge trimming in one pass Safety Features • Two emitter-receiver photoelectric systems protect rolls from damage. • Emergency kick cables front and rear. • All electrical and moving mechanical parts are located in bolted cabinets • Four emergency stop buttons Installation Requirement 220 to 240 VAC, 50/60 Hz, 55A. 32 A per phase. Air: 2 cfm at 100 psi, minimum(0.5 m3 at 700 vPa)
Call for Price
Call for Price
Call for Price
Call for Price
$ 79,500
$ 22,425
2017 Gehl R150 Skid Steer - Front Loader with 968 hours, enclosed Cab, Yanmar Diesel engine. Front and rear tires have 100% tread remaining. Weight 2.69 t Transport length 3.101 m Transport width 1.336 m Transport height 1.948 m Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 22,425
2017 Gehl R150 Skid Steer - Front Loader with 968 hours, enclosed Cab, Yanmar Diesel engine. Front and rear tires have 100% tread remaining. Weight 2.69 t Transport length 3.101 m Transport width 1.336 m Transport height 1.948 m Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 14,900
MLS Number 10740956 2011 Gehl SL4640 Skid Steer 1633 hours on meter Gauges working Diesel engine Solid pneumatic tires 30%
Call for Price
$ 1,000
GENERAL - 350 10", ...Tilting Arbor Table Saw with: 5 HP Motor & Rip FenceSpecifications: -- Table size: 20" LR x 28" FB x 34-1/2" H. -- Arbor dia. 5/8"; tilt 0° - 45° to right; blade speed: 4,000 RPM. -- Max. depth of cut: 3-1/8" at 90°; 2-1/8" at 45°; max. width of dado cut 13/16". -- Max. rip cap.: 52" Right.Equipped with: -- 8" Left & right table extensions. -- 5 HP Motor.Complete with: -- DELTA "Unifence Saw Guide"; 43" L x 3-1/2" H Rip Fence System. -- Blade Guard. -- Miter Gage.
$ 4,250
GENERAL - 40-400, ...SINGLE SPINDLE SHAPERSpecifications: -- 7.5 HP Motor, 1-1/4" spindle. -- (4) Working speeds: 3,600 - 5,000 - 7,200 & 9,000 RPM. -- 5" Vertical spindle adjustment. -- Table dimensions: 30" x 36"; Distance in front of the spindle: 16-1/2"; table insert rings: 5-1/2" & 8-3/4"; split style adjustable fence.Includes: -- Push button magnetic switch & spindle reverse rotation switching. - Not included: Interchangeable spindles. -- Knives max. width cap.: 5".
GENERAL - 30-225, ...15" x 6" Single-Sided PlanerSpecifications -- Planing thickness: 1/8 - 6"; min. stock length: 6-1/2"; max. depth of cut: 3 mm (0.12"). -- Table size: 14-1/2" W x 19" x 30-1/2" H. -- Cutterhead speed: 5,000 RPM; Feed speeds: 16 & 20 FPM. Equipped with: -- 3" Dia. 3-straight knife cutterhead; 3 HP Motor. -- Serrated spiral infeed & smooth solid steel outfeed rollers. -- Anti-kickback fingers & chip breaker. -- (2) In-table rollers. -- 16-1/2" W x 20-1/2" L Infeed & outfeed folding extensions. -- Built-in mobile base; pedal lock.Dimensions with infeed & outfeed tables extended: 61"; x 30"; x 48"; H.
GENERAL ELECTRIC - 9T, ...3-Phase TransformerSpecifications: -- 208 Volt secondary to 480 Volt primary; 45 KVA @ 150° C rise; 120 V neutral line; 60 Hz - 3 Ph; Type 2 enclosure. -- Includes: -- Fused disconnect.