Equipment For Sale

24” width capacity 5HP motor 6” drums 11fpm

GRIZZLY H2934 2-HEAD WIDE BELT SANDER2-Head Wide Belt Sander, 36-1/2" width cap. -- Head configuration: - 1st Head: Rubber covered contact drum; 2nd Head: Combination head with rubber covered contact drum and adjustable platen; Abrasive belt size 37" x 60". -- 0" to 6" Thickness cap., LED digital depth encoder; 14" min. board length and 12" infeed conveyor. -- 1st Abrasive belt surface speed of 3,543 SFPM; 2nd abrasives belt surface speed of 2,554 SFPM. -- Conveyor speed from 14 - 60 FPM. -- 20 HP - 50/25 Amp Sanding motor; 1 HP - 3.4/1.7 Amp conveyor motor; 0.25 HP - 1.2/0.6 Amp table lift motor. -- Complete with: Rubber covered holddown rolls, adjustable felt platen, Amp/load meter, and disc brake for emergency stop.

GRIZZLY GO447 37" Dual Head Wide Belt Sander.37" Width cap. Drum, combination HeadHead Configuration1st Head: Contact Drum2nd Head : Combination Head. Rubber covered drive roll and adjustable platen; sanding belt size 37"" x 75"".Specifications -- 6" Thickness cap., LED digital depth encoder; -- 14" min. board length and 12" infeed conveyor. -- Min board thickness 1/4" -- 1st Head Abrasive belt surface speed of 3,543 SFPM; -- 2nd Head abrasives belt surface speed of 2,554 SFPM. -- Conveyor speed from 14 - 60 FPM. -- 20 HP Motor driving both heads -- 1 HP - 3.4/1.7 Amp conveyor motor; 0.25 HP - 1.2/0.6 Amp table lift motor.

3/4 HP Single Shaper with Team B&B Tiltrod Shaping Gig!Precision-ground cast iron table, independently adjustable fence halves, Push button ON/OFF switch.Includes: Miter gauge and starting pins, Cast iron body construction, Pre-formed steel stand, shielded & permanently lubricated spindle bearings, Reversing switch Includes Team B&B Tiltrod Shaping Gig. Features: -- Motor size: 3/4 HP -- Motor Speed: 3450 RPM -- Table size: 15-5/8" x 17-3/4", Working Height: 34-1/4" -- Vertical Spindle travel: 7/8" Spindle speed: 8500 RPM

GRIZZLY - G1026, ...Single Speed Shaper w/Feeder & Mobile Base3 HP -3,450 RPM Motor; 1/2", 3/4" & 1" dia. interchangeable spindles; 2-1/2" spindle cap. under the nut and with 3" spindle travel; (2) spindle speeds of 7,000 or 10,000 RPM; reversing spindle switch. -- Features: 28-1/4" x 21-3/4" table; 34" table height.Complete with: Magnetic spindle brake and adjustable fence & 3" dia. dust extraction outlet.3-Roll 4-Speed feeder & mobile base!

3 HP motor 20” x 24” tilting table 20@ wheels 20” throat 13-7/8 cutting height rack & pinion guide adjustments 154-1/2” blade

7.5 HP 220/440 volt 3-phase wired 220 volt 10” dust inlet Total filter serface 261 sq. Ft. 99.9% effective at .2-2.0 microns 3468 cfm @4.3” static pressure

Grizzly 10ph 4 Bag Dust Collector

15" Width cap. with 1/4" - 8" thickness opening, 1/16" max. depth of cut; 3 HP single-phase motor belt drives 3-knife, 3-15/64" dia. cutter-head at 5,000 RPM; head with high-speed steel knives, max. thickness 8", min. 3/16"; dual feed speed of either 16 or 30 FPM; 16" x 42" cast iron table, table extensions on infeed/outfeed. Complete with: Magnetic controls, 2" dia. metal infeed & outfeed rollers, open fabricated steel base, and large hand wheel for cutter-head assembly adjustment.

GRIZZLY G4185 2-Spindle Horizontal Boring Machine, Will Accept 3-Spindle Boring HeadSpecifications: -- Max. stock width 7-1/2";. -- Table size 9-3/4"; x 15-3/4";, Max. table height 35";, Table height adjustment 3-1/2";. -- Max. bit cap. 9/16"; (Right-hand threaded), Spindle travel adjustment 3";, Spindle speed 4,000 RPM, Max. speed 12 SPM at 90 PSI. -- Hold-down force 600 Lbs.Equipped with: -- 2 HP 3,450 RPM TEFC Direct drive motor. -- Pneumatic spindle travel. -- 2-1/4"; Pneumatic hold-down. -- Pneumatic foot pedal control. -- Steel stand.Complete with: -- GRIZZLY "G5952"; 2C-W19"; 2-Spindle Boring Head, Max. bit cap. 5/8";, Bit threads 7/16 - 14 TPI Right-hand, Spindle speed 4,000 RPM.

12" G0503 Grizzly Resaw. Hydraulic Fed. 20hp 3 phase. #00875

Grizzly G0502 Up Cut Saw 18" blade Left hand 480 volt Work ready 2 available

GRIZZLY G9981 Heavy-Duty Overarm Pin Router Specifications: Throat 25-19/32". Table size 29-3/4” LR x 21-1/2” FB with Table tilt 0° - 45° Forward, Table height 36-1/2" - 42-3/4".Vertical table travel 8". Spindle speeds 10,000 & 20,000 RPM. Spindle travel 3-15/16". Equipped with: 5 HP - 3,450 RPM Motor. Foot pedal control.

Grizzly G0919 12" 2 Head Resaw

Gizzly Stationary Log Loading Knuckleboom

2008 Grove RT600E Crane 60 ton 8630 hours Twin winches Jib 70% rubber 2010 with 10108 hours also available

Grove TMSA250A Truck Crane Mdl 2504 S/N 36186 80' Boom Carrier Model 6425G S/N 1514001 With Box of Slings & Shackles

Grove Telescopic Boom Crane - model TMS 870, 70-ton capacity, 110' boom, 56 Jig. Includes 18000lbs counter weight. approximately 12,000hrs, 135 miles.

There are (7) Table available.

Gruber Systems 12’ Vibration Conveyor Tables with 230V 3 Phase Vibrators Seven Available. Six with Vibrators and one without. These powerful 3-phase electric vibrator-equipped Vibe Tables offer heavy-duty performance, quieter operation, and lower compressed air volume requirements compared to pneumatic vibrator equipped tables. Specifications: Frame: Height (to top of wheelway): - 28” (71.12 cm) Width - 24” (61 cm) Length - 120” - 144” (304.8 - 365.76 cm) Wheelway (wheel center to wheel center): Width - 20-1/8” (51.12 cm) Pneumatic Vibrator (@20 psi): PSI required to Start - 25 PSI (1.75 kg/cm²) Vibrations Per Minute (VPM) - 3,200 Force - 255 lb-force (115.6 kg-force) Flow - 9 CFM (0.25 m³/minute) Electric Vibrator (220/440 volt, 3Ø, 60hz. @ 10% setting) Vibrations per Minute - 3,456 VPM Pounds of force - 230 LB Full load current - 1.26 / .69 Amps Starting current - 9.8 / 4.9 Amps