Equipment For Sale
10583 Results Found
1992 MORBARK 30RXL WHOLE TREE CHIPPER ENGINE 3412 860HP STARTS AND RUNS GOOD 3 KNIFE, GOOD PADDLES, GOOD FACE PLATE, FEED DECK CHAIN NEED WORK CHIPPER IS WORKING EVERYDAY FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM
Call for Price
Call for Price
1994 Morbark 23 WCL Whole Tree Chipper Engine is a 3412, Seperator, Enclosed Fold Down Cab with Heat, 6 Sets of Knives and New Anvil, Ready for the Woods Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
Call for Price
1996 Morbark Model 20 Whole Tree Chipper ,Caterpillar 425 HP Engine, Enclosed Cab with Heat and AC, Needs a Condenser for the AC, Machine has Separator ,Ready for the Woods... Overall Length 21’6” Overall Width 8’0” Overall Height 13’6” Weight 10,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
1993 MORBARK 30/36 TREE CHIPPER HOURS ARE UN-KNOWN 325 CAT ENGINE REPLACE IN 2009 NEW BRAKES AND TIRES ALL HOSES REPLACED RECENTLY VALVE BANKS REBUILT ON BOARD AIR COMPRESSOR NEW BELTS AND CHAINS REW RADIATOR JOYSTICK CONTROL WORKS DAILY FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM
Call for Price
2014 Morbark Flail 223 Debarker, has a Caterpillar 9.3 that's been deleted. It has 9,249 frame hours and 600 on the engine rebuild. New Hydraulic Clutch Last Year, New Rear Feed Wheels 23" Capacity Ready for the Woods. Length (transport) 33'5" Height (transport) 9'11" Width 9'10" Weight 46,700 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 249,500
Cat 3412E 860hp Engine status report shows 43% average load factor, 3317 idle hours. 8899 hours on original engine. Completely serviced and runs properly. Morlift 500 loader with tight grapple, A/C cab all nicely fitted. Auxiliary air compressor Michigan model 40 knife grinder Extra knives Very sound, tidy chipper throughout. Call for complete condition report.
Call for Price
2006 Morbark Hurricane 18 with 4,942 hours. 18" chipping capacity, Caterpillar 213 pre emission diesel, 1,593 hours on newer motor. Machine has full hydraulics- 360' rotation chute, (3) jacks and 5000 LB winch. New: blades , blade bolts , blade pockets, cutter bar, drum bearings, blade belts , feeder wheel chain, 150' winch line with dog bone, batteries, leaf springs, fluids, filters, paint, waiting on sticker kit from Morbark. Ready for work. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
1977 MORBARK 22 TREE CHIPPER RECENT CUMMINS ENGINE RECENT CLUTCH SLIDE BOOM LOTS OF RECENT PARTS GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN GRANITEHE.COM
Call for Price
Call for Price
Call for Price
This mill has been shut down. The debarker is complete and ready to be removed. Morbark 636 Debarker Infeed/Outfeed Log Conveyors Waste conveyor runs under the system Approx 7' high structure Separate conveyors to load chips to trailer Includes All electric and hydraulic, steel walkways, 6x6 insulated cab
Call for Price
Call for Price
Call for Price
Morbark 628 Debarker with Cab, Controls, 20' Infeed & 20' Outfeed 3 Arm Kicker, Bark Conveyor S/N 051
Call for Price
Morbark 640 Debarker with cab Controls In/Out Feeds 4 Arm Kicker & Bark Removal chain. S/N 1033
2006 Morbark Timberwolf track cutdown or mowing machine. Rexroth pumps, Cat 3126 diesel, Cat 325 undercarriage (no wear at all). 20” saw head, Capable of 6,500 psi hydraulic pressure. Cab tilts, Machine has a slide boom (for speed), Will cut a swath of 82’ while tracking forward. Dimensions 11’10 wide, 10’ tall, Weight 78,891 lbs. With 20” saw head. 24” pads. Machine has 1485 hours. Two speed drive on tracks. Turtle track will do 360’s without any hesitation. The difference in mowing and felling with slide boom is the elevation of head while retracting boom (twice as fast as hoe). Will not get stuck!
2002 MORBARK 30RXL WHOLE TREE CHIPPER ENCLOSED CAB WITH HEAT AND AIR CAT V-12 MORLIFT 1000 BOOM READY TO GO
MORBARK 27RXL WHOLE TREE CHIPPER BAD MOTOR V-12 CAT LOTS OF NEW PARTS DISC SHAFT BEARINGS DECK CHAIN AND SPROCKETS JUST WENT THRU CHIPPER AND MOTOR THREW A ROD LOTS OF NEW PARTS JUST NEEDS MOTOR