Equipment For Sale
10603 Results Found
Call for Price
TABLE SAW TOP MEASURES 44" WIDE X 76 ½" LONG TABLE HEIGHT FROM FLOOR 34% " COMES WITH 5 - 12" DADO BLADES 1 HORSE POWER POWERMATIC MATERIAL FEEDER 5 HORSE POWER SAW ARBOR MOTOR 440 VOLT 3 PHASE
$ 12,950
POWERMATIC - WB-25, ...Wide Belt Sander1-Head; 25" width capacity; 1/8" to 6" thickness capacity.Combination sanding head with: 4" Dia. rubber-covered contact roll; 2" wide polishing platen; micro-adjust platen; steel abrasive belt tension roll; steel idler roll: 25" x 75" Abrasive belt capacity.Equipped with: -- 15 HP 3-Phase main motor; 1 HP variable feed motor, 15 - 49 FPM. -- 1/4 HP Table raising & lowering motor with: Auto adjust thickness assist; 1/8" to 6" opening with (4) screw jacks. -- Double infeed & outfeed rubber covered holddown rolls. -- Complete with: -- Digital readout; air eye belt sensing; limit switch overtravel protection; magnetic starter; overload protection; load meter; emergency brake.Includes: Owner's manual & parts list.
$ 3,649
20" Dia. dynamically balanced aluminum disc, 3 HP - 1,740 RPM direct drive motor; 15" x 27-1/4" table w/miter gage slot, tilts 30° upward & lowers 45° downward, 90° positive table stop; rack mechanism for raising & lowering table by hand crank, heavy bolt-down steel base. Complete with reversing switch and miter gauge. Also available in Single-phase in 2 HP motor.
SALE PENDING
2006 POWERSCREEN CHIEFTAIN 1400 -8785 hours -Hydraulic folding conveyors for quick setup -Screen walkways and access ladders for easy maintenance -Drop-down tail conveyor for screen media changes -Radio-controlled tipping grid -Integrated high-capacity variable-speed belt feeder -Grease-filled 4-bearing,2-deck screenbox -Impressive 400 TPH capacity -Applications Sand & gravel, Blasted rock, River rock, Topsoil, Composted materials, Wood by-products and more!
$ 215,000
2013 Powerscreen Xh320-3 Trakpactor -8300 hours -No DEF -CAT C9(325H.P) -320 T.P.H -Twin apron -4 Bar rotor -Twin Shaft Vibrator -Hydraulic Folding features for transport and work
2005 Powerscreen 1800 Track Unit, Engine is a Caterpillar, 5000 Hours, Grizely Bars on Top Deck, Scalping Screener, Brand New Tailings Conveyor, New Bearing Housing for Shaker, Complete Engine Service done Recently, Ready to Work. Weight 66,139 lbs Transport width 9'6? Transport length 50'11” Transport Height 11'2" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 159,900
2014 CHIFTAIN POWERSCREEN 1,848 HOURS GOOD SCREENS GOOD BELTS CATERPILLAR ENGINE VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM
2021 Powerscreen Chieftain 1400 -1900 hours -2 deck vibratory box -Up to 400 tph -54,895lbs whole system -Tier 4 engine (110H.P) -3 Conveyors Main,Tail(fine),Side(midsize/oversize) -Belts in good shape -Clean ready to work unit
Call for Price
2001 Powerscreen 725 Trommel Screen, Equipped with Remaned Deutz 100 HP Turbo Diesel, 1000 Hours, Used 1/2" Screen Cloth, New Sticky Belts, All New Brushes, New Tires, All New Radial Stacker Motor, Ready for Work. Weight 55,116 lb Transport length 638" Transport width 108" Transport height 158" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
2015 Power screen 260 Trakpactor -2500 hours -Potential output of 250 tph -Load management to control feed system -Remote -Serviced regularly -Machine weight is 59,525 lbs -Clean machine MORE PICTURES COMING SOON !!!!
Call for Price
Call for Price
$ 68,750
Precision P748H rosserhead debarker, 32’, 3 7/16" shaft, S/N D-577, debarker will debark logs up to 30’, includes (6) strand infeed deck w/ hydraulic motor/drive, includes Precision 65'barn sweep w/ incline, (ref #181) Call Rachel for more information 931-797-6284
Call for Price
Call for Price
Call for Price
Precision Rosserhead Log Debarker with 60hp motor on head and 15hp electric/hydraulic power unit with 30' carriage
Complete chip plant includes: - The infeed is 12’ above ground level. They were feeding it one log at a time with a shovel. - There is a single chain 12” wide leading to the debarker. - The debarker is a Salem 20” ring debarker with mcdiarmond controls. - From the debarker it goes through I think is a metal detector. It’s is enclosed, 8’ long with a belt conveyor. - 75’ of 3-strand chain that reduces to 2-strand chain for 35’ then goes to another 2-strand chain for 12’ then goes into the chipper. - The chipper is a Precision with 2- 400 hp high efficiency 3 phase motors. - From the chipper the chips drop onto a 42”x50’ inclined belt that leads to the 2 deck screen. The screen is 92”x20’ - The waste goes on a 9”x20’ incline belt and dropped into a truck. - The chips go out on a 3-strand 100’ conveyor (strands are 14” wide) to a radial stacker for loading trucks. The stacker belt is 42”x65’ - Chips can be redirected to blower unit system that will transport them to a rail siding to so they can be loaded into a rail area. It starts out with 75’ of 12” pipe running on the ground. Then it sweeps straight up to a height of about 24’ and goes 150’ to a siding across the county road. The chip loading facility is intact. - The hog is located back by where the logs are loaded onto the chain going to debarker. Here’s a list of the conveyors going back to the Kockums hog. It has a 24”x36” opening at the top. - Conveyors: 12”x100’, 12”x 25’, 12”x60’. All of these conveyors are 1 strand steel.