Equipment For Sale
10603 Results Found
$ 14,200
TAYLOR 20-Section Clamp Carrier Specifications: -- 8.5' Width cap. -- 39"" Max. clamp opening, 2-1/2" Jaw height. -- (4) approx clamps per section Equipped with: -- (75) Clamps total. -- Pneumatic tigthener -- Pneumatic panel flattenerComplete with: -- Air drive carrier rotation, -- I-Beam chain assemblyNote: Already taken down.
$ 74,750
2020 Taylor TX300S Pneumatic Tire Forklift with 7,923 hours. Overhead guard, Load backrest, side shifter and Enclosed cab. Capacity is 21,900 lbs. Fork Length 60", Lowered Ht. 204", Max Ht. 272". Tires have 80% - 90% tread remaining. Weight 48,860 lb Width 103" Lenth 174" (less forks) Height 155" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 137,500
2018 Taylor TX300S Pneumatic Tire Forklift with 8,991 hours on a Diesel Engine. Overhead Guard, Load Backrest, Enclosed Cab sideshifter/Forkpositioner. Fork Length 114", Lowered Ht. 132" Max Ht. 236" Free lift 132". Tires with 100% tread remaining. Length 15 ft 0 in Width 9 ft 0 in Height 13 ft 0 in Weight 48,600 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 18,500
Call for Price
Capacities: 11” minimum length 98” maximum length 1” minimum width 32” maximum width 5/8” minimum thickness 3” maximum thickness with a conversed glue spreader(model 30J)
$ 23,500
TAYLOR 40 Section Clamp Carrier.Specifications: -- 40-Section, 8-1/2' width capacity -- Average 4/5 clamps per section (175 clamps total), all with 32" max. clamp opening. -- Equipped with (175) clamps plus a pallet of spares that require repair, 32" clamps with 2-1/2" high jaws .Complete with: -- Heavy Duty Drive for rotation,& clamp tightening. -- Foot pedal control. -- Includes a glue applicator.
TAYLOR 800036 7' W 12-Section Semi-Automatic Pneumatic Clamp Carrier, with Flattener & TightenerEquipped with: -- (71) 32"; Cap. Clamps, with 4-5/8"; W x 3-1/2"; H Jaws. -- Air motor drive. -- Dual foot pedal control.Complete with: -- Pneumatic Panel Flattener. -- Pneumatic Clamp Tightener.
$ 148,500
2018 Taylor THC-300S Cushion Tire Forklift with 3,238 hours. Overhead guard, Enclosed Cab and Fork Positioner. Fork Length 72", Lowered Ht. 94", Max Fork Ht 121". Drive tires have 20% tread remaining, Steer tires have 90% tread remaining. Some lower cab glass cracked and hoses worn. Width 62" Length 145" Height 120" Gross Weight: 42,340 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
Call for Price
$ 136,000
MLS Number 13019231 2018 Taylor X330S Forklift 8991 hours 33,000 pounds capacity 48,600 chassis weight 114" forks 132" lowered height 236" max height Tires 100% SS/FP
Call for Price
Teco Induction Motor, Type AEVFACLQ9 Frame, 160 M 20 HP RPM 3520 Volts 230/460 3 Phase. This electric motorwas taken NEW off a LeaderMac 523 SpeedMac. There are 2 of these. Call 800-459-2148 for more info.
Call for Price
$ 2,500
Call for Price
$ 129,900
DEUTZ TD 2.9 L04 (60HP) LARGE CAPACITY BIOMASS HOPPER 78'9" DRUM CENTRES GIVING A MAX STOCKPILE HEIGHT OF 34'6" AT 25 DEGREES 42" WIDE 3 PLY BELT HYDRAULIC FEED HEIGHT ADJUSTMENT HYDRAULIC FOLD FOR TRANSPORT CRAWLER TRACKS WITH PENDANT CONTROL SYSTEM 2 SPEED TRACKING LOW LEVEL GREASING
$ 215,000
CAT C4.4 TIER 4F DIESEL ENGINE (110 HP) FEEDER HOPPER W/HYD ADJUSTABLE LANDING LEGS VARIABLE SPEED CONTROL WITH BIOMASS DISCHARGE AUGER CONVEYOR 73’ 10” DRUM CENTER TO CENTER 48” WIDE 3PLY BELT HYD RAISED AND LOWERED BOOM HYD FOLD OVER FOR TRANSPORT FULL LENGTH SIDE SKIRTING ALONG MAIN CONVEYOR TWIN HYD DRIVE DISCHARGE CONVEYOR UNDERCARRIAGE WITH HEAVY DUTY TRACKS RADIO REMOTE – START/STOP FEEDER, RAISE/LOWER DISCHARGE, REVERSE AUGER HEAD DRUM BEARING GAS CARTRIDGE AUTO GREASING LOW LEVEL GREASING – TAIL DRUM
Call for Price
2015 Terex R265T Rubber Track Loader, 980 Hours, 74HP Cummins Engine, Cab/Heat/A/C, 2 Speed, Hi-Flow, 72 Bucket, Completely Serviced. Please Call For More Info
$ 20,000
2015 Terex R200S Skid Steer with 3,377 hours. 60 HP, Lift Capacity at 35% 700 lb., Lift Capacity at 50% 2000 lb. Operating Weight 6370 lb. Overall Length with Bucket 133.6 in Overall Height to Top of ROPS 77 in. Width 66 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 24,900
2015 Terex R070T Rubber Track Skid Loader, 568 Hours, (Same As ASV RT30), 48 Bucket, Cab, Just Serviced, 30 HP Engine, 48 Wide, Joystick Controls.