Equipment For Sale
10603 Results Found
Call for Price
Tidland 470 Sander This system was used in a particle board plant that has been closed around 10 years.
Call for Price
Call for Price
Call for Price
Automated push feed saw system for fast and accurate cutting of wood and plastic Adjustable cutting envelope so you can set the envelope to the needed width of the material you are cutting, whether single piece or pack Tigersaw 1000's Dynamic Optimization software give you the best yield by determining the optimal cutting order from your parts list (Will cut the mark) Value based optimizing allows the operator to value items in a cut list individually Download parts files to Tigersaw 1000, comes with TigerLink 6 (Tigerstop's cut list downloading software) Accuracy: +/- .012" Push capacity: 90 lbs.(on flat tables) Cutting envelope with 450 mm blade: 1" x 16" up to 5" x 6" Cutting envelope with 500 blade: 1" x 16" up to 6" x 6" Maximum clearance length for loading: 12' Material feeds right to left 24" wide x 18' long flat infeed table 24" wide x 12' long roller outfeed table Complete guarding of the saw blade area, safety interlocked guard door and saw blade door (neither can be opened while running) Saw motor: 10 hp Dust collection requirements: 600 cfm (4" dust port) Air requirements: 85 psi (water and oil free air) Electrical: 15 full load amps on 460 volt INCLUDES: Tablet package: TigerTouch software loaded onto a Surface Pro tablet. Includes downloading software (DNLD), Dynamic optimization software (OPT), and TigerSET software (SET). Label printer
$ 165,000
$ 26,500
1999 Tigercat 630B -14000 frame hours -4200 on 8.3l Cummins -New fuel filter -Greased -Two boom cylinders will be needed re-repacked -Top center pin is a little bit loose but almost don’t notice yet Functional woods ready skidder
$ 485,000
2022 Tigercat X822E -2,755 hours -Tigercat 5702 sawhead -HID lights -Webastos engine and hydraulics heater -FH400 undercarriage with 24" pads -Remainder of 3 years or 6,000hrs powertrain and hydraulics warranty which ends Aug,8th 2025 -$4,000 worth of spare hoses -Spare saw teeth and bolts -Oil filters -Machine is in like new condition
This 720E Tigercat is in good condition it has 28L-26 tires with dually plates. We will be willing to sell the cutter head off it for $15,000 separate. Or if you want a smaller head for this machine we will swap out the head for a smaller one free of charge. This cutter is located at 467 St Peter St, State Line, Mississippi If interested in more details call Gavin 601-394-7796 Tim 251-366-3237 Kameron 251-242-5493
2007 Tigercat 720E, runs good but does need a saw disk. We plan to put a disk on it. So it'll be ready for the woods when purchased. Located on our yard at 437 Saint Peter Street State Line MS 39362 For more information you can call Gavin 601/394/7796 Call or text - Tim 251/366/3237 Kameron-251/242/5493 ALL SALES ON USED EQUIPMENT ARE CASH, CASHIERS CHECK OR BANK TRANSFER.
$ 165,000
2012 Tigercat L870C Feller Buncher -3500 hours on the following: -New engine -Pumps -Finals -Uc is around 70% -New A/C compressor and belts Ready to work
Call for Price
$ 55,000
2005 TIGERCAT 244 LOG LOADER 17,000 FRAME HOURS 2006 BIG JOHN TRAILER CTR DELIMBER NEW CUMMINS 5.9 GROUND SAW RECENT PUMPS VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM
$ 175,000
N67 6.7L ENGINE S/N 001695642, 30.5X32 BLADE EXT, WINCH AND STD FUEL TANK, BUNCHING GRAPPLE S/N SBG7204-00060, TELEMATICS, CB, ALL SEASON OIL
$ 215,000
$ 246,000
MLS Number 11489109 2017 Tigercat 635G Skidder 8335 hours New Front + Rear Diffs within last year New Turbo New Rear Tracks
$ 85,000
MLS Number 11991115 2013 Tigercat 234 Log Loader Grapple Saw Engine rebuild by Tigercat No leaks Has electronics for scale. Needs monitor "In super good condition"
Nice good used take off grapple. Comes with Tigercat OE link and hoses. Previous owner upgraded to a new 2023 grapple.
$ 157,500
2004 Tigercat 822 -17500 frame hours -3500 hours on engine(8.3l Cummings)and hydraulic pump -UC 90% -Track motors and planetarys have low hours also -Boom is lined bored and has new pins and bushings -New swing bearing and rotary manifold -Has 5400 felling head on it and has a new style saw shaft on it -Cuts up to 21 inch timber More pictures of inside of cab coming soon!!!!