Equipment For Sale

Brewer BR-425 Step Planer

480V | 6" x 12" | 6 Knife Planer Head

Brewer BR-8112 S | 460 V | 25hp Cross Cut | 100hp Bottom Arbor | 60hp Top Arbor | 30 hp Plainer Motor.

1-Brewer infeed deck, 2-Brewer unscrambler, 3-Brewer cut off saw BR1695, 4-West Plains 400 two head band saw, 5-Transfer chain and infeed chain, 6-Brewer Gang saw BR8112S.

BREWER HB-1685 CUTOFF SAW W/26" SAW BLADE, 25 HP MTR ON SAW, 18 IN X 16 FT PWR ROLL INFEED W/ HYD BOARD STOPS, HYD CANT FLIPPER W/ 18 IN X 6 FT PWR OUTFEED, 4 FT X 5 FT STEEL INSULATED CAB W/ CTRLS, HYD PWR UNIT, S/N 121286

20' 4-Strand Log Decks | Golden Eagle Slasher Saw | 2) Golden Eagle Deluxe Cabs | Primary Single Arbor Scragg Saw | Secondary Single Arbor Scragg Saw | 2) Golden Eagle Slab Edger Saw | 310-U 3 Head Under Saw | 2000 5 Head Band Saw | Side Winder Board Desduster | Super Golden Eagle 3 Head Splitter Band Saw | 4 Head Under Cut Cant Trim Saw | BR-9920 Double Arbor, 20" Bay Gang Saw System | AIT TS300 Stacker | 2) M2L Stackers | BR-4004C Double Head Notcher | Golden Eagle Chamfer | Complete Conveyors, Infeed, Rollers and outfeeds for all machines. Complete system 2013. Have videos and more pictures upon request.

Brewer Golden Eagle B-Series Lumber Stacker with Electrical Panel. S/N 071901

480V | 2011

Brewer Green Chain 3 Strand 20' Electric motor

Brewer 6'x 12" Belt Conveyor with Motor & Drive. (6" Belt on it)

Brewer 8124 DBL Arbor Gang Saw

4 Saw Gang Edger - Unit is in good shape and has powered hold down rolls

Brewer 3 Head Resaw Model: Golden Eagle 2000 Year: 1998 Blade Size: 2" Voltage: 480 3ph Material Capacity: 7.5" - 12" width Serial #: No Placard Condition: Fully Functional, no rust, Updated electrical panel. Spare Parts: 2" Blades Dimensions: 20' long x 11' wide Price:$70,000 New Bearing on all wheels front and back. We put a new rubber belt on the infeed, we still have the steel belt infeed if they want to change it back. About 20-40 2” band saw blades included. Saw Head 3 has 1 new motor.

Brewer 3-Head Resaw Model # BR-3B8X12R

Brewer 1695 Chop Saw 20HP 3 strand log deck Live roll 15' infeed 10' outfeed Needs chains and rollers

BRIDGEWOOD - BW-508 PV ...Planer20" Width cap.; 1/4" - 9" opening; 7-1/2 HP motor (3-phase) with: 1-1/2 HP Feed motor; both made in the USA; variable feed speed: 20 - 32 FPM.Complete with: Segmented infeed roller; cast iron chip breaker and adjustable bed feed rollers; 3-knife cutter with jack screw adjustment. - Includes (2) sets of knives.

BRIDGEWOOD BW-511MS Sliding Table Shaper Single Phase 4 HP Motor with forward & reverse.Specifications: -- 3/4″ Spindle with 4-1/2″ under the nut, and 3-1/2" of Spindle travel. -- (5) Spindle speeds: 3000, 4000, 6000, 8000 and 10000 RPM. -- 52" Table Length, and 35 Sliding Table Length1-used BRIDGEWOOD BW-511MS SLIDING TABLE SHAPER. Table Length: 35″, Sliding Table Length: 52″, 3/4″ spindle with 4-1/2″ under the nut, Also , Spindle Travel: 3-1/2″, Motor: 4 HP, single phase, (5) spindle speeds: 3000, 4000, 6000, 8000 and 10000 RPM. For operation on 220V, 1PHNote- the feeder in the photo is not included

16” Width Capacity Approx 15 HP Top Head Approx 10 HP Bottom Head Feed 23-65 FPM 220 Volt 3 Phase

WANTED BROCKWAY CABOVER, it will look like a F model Mack. Call Aaron 828-284-0145 or Ethan 828-284-5805 (Picture for attention / example)

2011 Bron 700 Mulcher, Tyalta Mulching Head, Currently Has 2640 Hours, Cat C18 700HP Engine, Berco Undercarriage D7 with 36" Single Grouser Pads. Engine and Hydraulic Heater for Cold Weather Starting, Backup Camera and 2 Internal Cameras, Touch 1 Digital Display, Fire Suppression System, And On Board Air Compressor. Unit has been completely serviced and is ready to go to work. Please Call for more info