Equipment For Sale

7' x 36" 3 Strand Board Deck w/ 3 Arm Drop Out Tipple Elec. Drv.

Listed by JO Working on Pricing

Greenlee tennoner with 5 heads on each side. Call 800-459-2148 for more info.

This item is in an Auction on exfactoryauctions.com. Go here to view item: http://exf.ac/i6j GREENLEE 5-Head Single-End Tenoner Specifications: Max. tenon length: 3-3/4" with (1) Table pass, 7-1/2" with (2) Table passes. Max. tenon thickness 5". Max. stock width 24". Equipped with: Manually-operated sliding table. (1) Top & (1) Bottom Tenon heads, (1) Top & (1) Bottom Cope heads, & (1) 7" Cutoff head. All heads with 2 HP - 3,500 RPM Direct drive motors.

This item is in an Auction on exfactoryauctions.com. Go here to view item: http://exf.ac/i6i GREENLEE NO. 532 5-Head Single-End Tenoner Specifications: Max. tenon length: 3-3/4" with (1) Table pass, 7-1/2" with (2) Table passes. Max. tenon thickness 5". Max. stock width 24". Equipped with: Manually-operated sliding table. (1) Top & (1) Bottom Tenon Heads, (1) Top & (1) Bottom Cope Heads, & (1) 7" Cutoff head. All heads with 1-1/2 HP - 3,600 RPM Direct drive motors.

GRIGGIO SC-1500 Table Saw Specifications: -- 60" Cut cap.; 5 HP main motor & scoring motor with 3/4" dia. arbor and 9,000 RPM blade speed; external scoring blade adjustment. -- Features: -- 0° - 45° Tilting 1" dia. main saw arbor, 16" max. blade size, 5.1" max. depth of cut, single blade speed. -- Rip-cut fence assembly adjustable to 60" max.NOTE: Dimensions and weight are approximate.

Griggio C250 Rip Saw 250 mm Wide belt (10")

6' x 14' capacity 4 HP motor 220 volt 3 phase stop system on base

GRIGGIO G 1100 Wide belt Sander2-Head, 1,100 mm (43") width cap. -- 1st Head: Rubber covered steel contact roll, duro 85, 220 mm diameter . -- 2nd Head: Rubber covered contact roll duro 50 -- 25 HP motor to drive both head. -- 43" x 85" abrasive belts, electropneumatic abrasive belt tracking, -- Conveyor belt feed, two speed from control panel at 15 and 30 FPM, 0.4/0.7 HP feed drive, automatic conveyor belt tracking, -- 1/8" - 6-1/2" motorized thickness adjustment with LED readout & 0.75Hp gearmotor drive. --Automatic positioning of the working table, rubber covered spring loaded pressure rollers, double infeed and outfeed rubber covered rolls, infeed panel "over-thickness" sensor. --Two suction dust hoods dia. 6" (150mm),

24” width capacity 5HP motor 6” drums 11fpm

GRIZZLY G9981 Heavy-Duty Overarm Pin Router Specifications: Throat 25-19/32". Table size 29-3/4” LR x 21-1/2” FB with Table tilt 0° - 45° Forward, Table height 36-1/2" - 42-3/4".Vertical table travel 8". Spindle speeds 10,000 & 20,000 RPM. Spindle travel 3-15/16". Equipped with: 5 HP - 3,450 RPM Motor. Foot pedal control.

GRIZZLY GO447 37" Dual Head Wide Belt Sander.37" Width cap. Drum, combination HeadHead Configuration1st Head: Contact Drum2nd Head : Combination Head. Rubber covered drive roll and adjustable platen; sanding belt size 37"" x 75"".Specifications -- 6" Thickness cap., LED digital depth encoder; -- 14" min. board length and 12" infeed conveyor. -- Min board thickness 1/4" -- 1st Head Abrasive belt surface speed of 3,543 SFPM; -- 2nd Head abrasives belt surface speed of 2,554 SFPM. -- Conveyor speed from 14 - 60 FPM. -- 20 HP Motor driving both heads -- 1 HP - 3.4/1.7 Amp conveyor motor; 0.25 HP - 1.2/0.6 Amp table lift motor.

Grizzly 10ph 4 Bag Dust Collector

15" Width cap. with 1/4" - 8" thickness opening, 1/16" max. depth of cut; 3 HP single-phase motor belt drives 3-knife, 3-15/64" dia. cutter-head at 5,000 RPM; head with high-speed steel knives, max. thickness 8", min. 3/16"; dual feed speed of either 16 or 30 FPM; 16" x 42" cast iron table, table extensions on infeed/outfeed. Complete with: Magnetic controls, 2" dia. metal infeed & outfeed rollers, open fabricated steel base, and large hand wheel for cutter-head assembly adjustment.

Grizzly G0502 Up Cut Saw 18" blade Left hand 480 volt Work ready 2 available

12" G0503 Grizzly Resaw. Hydraulic Fed. 20hp 3 phase. #00875

3/4 HP Single Shaper with Team B&B Tiltrod Shaping Gig!Precision-ground cast iron table, independently adjustable fence halves, Push button ON/OFF switch.Includes: Miter gauge and starting pins, Cast iron body construction, Pre-formed steel stand, shielded & permanently lubricated spindle bearings, Reversing switch Includes Team B&B Tiltrod Shaping Gig. Features: -- Motor size: 3/4 HP -- Motor Speed: 3450 RPM -- Table size: 15-5/8" x 17-3/4", Working Height: 34-1/4" -- Vertical Spindle travel: 7/8" Spindle speed: 8500 RPM

2021 Grizzly Extreme band saw, S/N 210-10180 Model G0513X2BF, 17" wheels W/ 2 HP motor w/ motor brake & foot pedal w/ tilting table 23 5/8 x 17 1/4 single phase 200V 131 1/2" band length Ref #204, Contact 931-797-6284

2004 Grizzly pop up chop saw 24", S/N 24010 Model G0549, 15 HP 3 phase 220V/440V, cuts 8" thick x 21" wide material carbide tip 24" saw w/ machine, flex dust removal piping, Ref #204, Call 931-797-6284

Grizzly G0562ZP Bag Dust Collector 3 HP motor