Equipment For Sale

Williams Horizontal 50" Grinder with Webster Vibrating Conveyor s/n 20492, 200hp motor

100 HP 230/460 volt 20” x 19” inlet 9” x 28” outlet no hopper

Williams Hog Grinder s/n 14028, 40" cutting head, 20"x29" top opening, 150hp motor

Williams Hog S/N 14482 150HP Electric Motor

2015 Wilson Pacesetter Trailer Hopper bottom Was used for grain PRICE REDUCED

2006 Wilson Pacesetter Trailer Hopper bottom Was used for grain PRICE REDUCED

WILTON 4421-2 20" Pedestal-Type Disc SanderSpecifications: -- Table size 10-1/2" x 27-1/2", Table tilt 45° Out/30° In, Table can be lowered below disc to accommodate large workpieces.Equipped with: -- 3 HP 1,720 RPM Direct drive motor, Low voltage protection switch. -- Positive lock rack & gear table tilt.

WILTON 4421-2 DISC SANDER ---Price Negotiable---Make an Offer!--- Heavy Duty for Wood, Metal, Fiberglass, or Plastic! - Pedestal-Type Disc Sander - Table size 10-1/2" x 27-1/2", Table tilt 45° Out/30° In, Table can be lowered below disc to accommodate large workpieces - 3 HP 1,720 RPM Direct drive motor, Low voltage protection switch - Positive lock rack & gear table tilt

WINTERSTEIGER - DSG 150 ECO, ...Thin Cutting Frame SawSide & Center Guides: Fitted as standard on the basic machine to guarantee the broadest possible range of application. Specifications: -- 11 kW (15 HP) Main motor; 0.3 - 1.5 MPM feed speeds; 210 mm saw frame stroke with (450) strokes/Min. -- 30 - 216 mm Cutting height, adjustable as required; max. +/- 0.5 mm difference in block height. -- 60 - 150 mm Cutting width (side guide); (2) 23 - 70 mm cutting width (using center guide); (2) channels max. 72.5 mm using 7.5 mm guide or with (5) channels max 24.5 mm using variable block width; 300 mm min. block length. -- 1.5 mm Cutting accuracy; +/- 0.2 mm Cutting loss (depending on saw length). -- Max. (30) saw blades (excluding scraper saws); (3) 120 mm sawdust extraction tubes. -- "Air Jet" Module: Cleans the lamellas and saw blades during the sawing process by blowing away the sawdust; cools down the saw blades during the sawing process and cleans the shaving space of the saw blades. -- "Air Jet" also increases the saw blades life and improves the lamella's accuracy. Sawdust-free lamellas can then be glued immediately after cutting.Comes with transformer

Wintersteiger DSG Sonic Frame Saw

Wisconsin B20-M multiple spindle horizontal drilling machine 8' 4-HEAD 13-SPINDLE DRILLING MACHINE 3 HP DRILLING MOTORS, HYDRAULIC , AIR CLAMP Serial # B20M-6825-96 5 HP hydraulic pump: 230/460V, model CLT-30 GAL, 1050 psi, 8 GPM., serial# 1-89175-0 Four Baldor Drilling motors 3 HP, 208-230/460 volts, 3450 RPM., Baldor, Removed from a complete plant liquidation in October 2020. Stored inside a climate controlled room, Contact us for a delivered price

MLS Number 10684323 Wisconsin Automated Machine C-450 Tennoner Single end tennoner Automatic double head coping tennoner Model C-450 Serial: C-450-6901-00 230 volts, 3 phase, 60 Hz. Allen-Bradley and Motortronics electrical Motors are 230 volts 48 full load amps. 15.2 amps on largest motor

For sale, used trade-in Wolfe Ridge 35 HDI Box Wedge machine. Customer had two of these machines, and traded one in on a new VS. This machine has 360 hours on it, and was just gone through at the shop here ready for its new owner. Pick from your choice of box wedge - ONE included with the machine - 3x3, 3.5x3.5, 4x4, 4.5x4.5. Traditional 2/4 way wedge with bolt on height adjustment is also included. Honda GX630 v-twin gas engine, 35 ton splitting force. Please call 715-598-7790 for more information. Located at our factory in Eau Claire, Wisconsin but can ship anywhere in the US or Canada.

32" Vertical grinder with 25 HP motor Dentom 624 9500 BTU Furnace automated measured feed controlled by furnace temperature Holding tank for feed from the grinder which is automatically fed to the furnace...that feed is temperature controlled.

2020 Wood Beaver 18 BAB Only 245 hours Shrink wrap machine also available

Wood-Mizer 12' (2) strand custom log deck, Excellent Condition (Rarely Used)... Contact Amy for more information (728)723-9449

System includes: Wood-Mizer LT 70 Sawmill Wood-Mizer 2 Blade Edger Wood-Mizer 2-Head Resaw Norwood 2- Blade Resaw All powered by electric motors All decks and conveyors

HR500 Woodmizer 2hd Bandsaw. Located in NY. #C914

Wood-Mizer LT40 Super Hydraulic Electric 3180 hours Includes power inverter Currently under power and in production PRICE REDUCED

1995, 2400 hr. 25 hp. Vanguard gas engine, all 12V, a new 12V motor for the debarker, 1.25" bands 30 extra band blades, 28"x16' cutting capacity, many NEW parts added, mill in use, in GOOD condition. Write: Reuben Yoder 25090 County Highway J66, Davis City, IA 50065 for more info.