Equipment For Sale

WILTON 4421-2 DISC SANDER ---Price Negotiable---Make an Offer!--- Heavy Duty for Wood, Metal, Fiberglass, or Plastic! - Pedestal-Type Disc Sander - Table size 10-1/2" x 27-1/2", Table tilt 45° Out/30° In, Table can be lowered below disc to accommodate large workpieces - 3 HP 1,720 RPM Direct drive motor, Low voltage protection switch - Positive lock rack & gear table tilt

Wintersteiger DSG Sonic Frame Saw

WINTERSTEIGER - DSG 150 ECO, ...Thin Cutting Frame SawSide & Center Guides: Fitted as standard on the basic machine to guarantee the broadest possible range of application. Specifications: -- 11 kW (15 HP) Main motor; 0.3 - 1.5 MPM feed speeds; 210 mm saw frame stroke with (450) strokes/Min. -- 30 - 216 mm Cutting height, adjustable as required; max. +/- 0.5 mm difference in block height. -- 60 - 150 mm Cutting width (side guide); (2) 23 - 70 mm cutting width (using center guide); (2) channels max. 72.5 mm using 7.5 mm guide or with (5) channels max 24.5 mm using variable block width; 300 mm min. block length. -- 1.5 mm Cutting accuracy; +/- 0.2 mm Cutting loss (depending on saw length). -- Max. (30) saw blades (excluding scraper saws); (3) 120 mm sawdust extraction tubes. -- "Air Jet" Module: Cleans the lamellas and saw blades during the sawing process by blowing away the sawdust; cools down the saw blades during the sawing process and cleans the shaving space of the saw blades. -- "Air Jet" also increases the saw blades life and improves the lamella's accuracy. Sawdust-free lamellas can then be glued immediately after cutting.Comes with transformer

MLS Number 10684323 Wisconsin Automated Machine C-450 Tennoner Single end tennoner Automatic double head coping tennoner Model C-450 Serial: C-450-6901-00 230 volts, 3 phase, 60 Hz. Allen-Bradley and Motortronics electrical Motors are 230 volts 48 full load amps. 15.2 amps on largest motor

Wisconsin B20-M multiple spindle horizontal drilling machine 8' 4-HEAD 13-SPINDLE DRILLING MACHINE 3 HP DRILLING MOTORS, HYDRAULIC , AIR CLAMP Serial # B20M-6825-96 5 HP hydraulic pump: 230/460V, model CLT-30 GAL, 1050 psi, 8 GPM., serial# 1-89175-0 Four Baldor Drilling motors 3 HP, 208-230/460 volts, 3450 RPM., Baldor, Removed from a complete plant liquidation in October 2020. Stored inside a climate controlled room, Contact us for a delivered price

For sale, used trade-in Wolfe Ridge 35 HDI Box Wedge machine. Customer had two of these machines, and traded one in on a new VS. This machine has 360 hours on it, and was just gone through at the shop here ready for its new owner. Pick from your choice of box wedge - ONE included with the machine - 3x3, 3.5x3.5, 4x4, 4.5x4.5. Traditional 2/4 way wedge with bolt on height adjustment is also included. Honda GX630 v-twin gas engine, 35 ton splitting force. Please call 715-598-7790 for more information. Located at our factory in Eau Claire, Wisconsin but can ship anywhere in the US or Canada.

32" Vertical grinder with 25 HP motor Dentom 624 9500 BTU Furnace automated measured feed controlled by furnace temperature Holding tank for feed from the grinder which is automatically fed to the furnace...that feed is temperature controlled.

2020 Wood Beaver 18 BAB Only 245 hours Shrink wrap machine also available

2017 | 20hp Motors | 5000 Hours

Wood-Mizer LT300 w/Cab & Log Deck

Wood Mizer 4 head resaw with run-a-round , needs some chain and cylinders put back on it, cuts 6" wide

2007 Wood-Mizer LT300 3400 hours 3 phase Great condition Includes 80 new blades and upgraded steel spindles with new bearings

Sawmill with cab and deck 20' log deck Dust belt

4 Strand 20' long

Wood-Mizer 4 Head Resaw with Run around -4 brand new electric motors -Upgraded to 20 HP 3600 RPM motors -Everything is great working order -Still hooked up and operational

System includes: Wood-Mizer LT 70 Sawmill Wood-Mizer 2 Blade Edger Wood-Mizer 2-Head Resaw Norwood 2- Blade Resaw All powered by electric motors All decks and conveyors

Wood-Mizer LT40 Super Hydraulic Electric 3180 hours Includes power inverter Currently under power and in production PRICE REDUCED

2022 Wood-Mizer LX25 Manual push mill. No power feed. This mill can be converted into a resaw with use of a belt. 7 HP gas engine. Cap 26" x 32.5' with 20' extension. Mill has been made portable. Mill is stored under cover.

2002 Wood-Mizer LT70. Original Owner. 25 HP 3 phase electric motor. Band width 1.5 ". Infeed length 20'. Infeed width 8' with stop and load. Outfeed length 20' incline with 3 way sort. Outfeed width 32". Cap 20' x 38". Includes 26' two strand green chain brow. Call 800-459-2148 for more info.

-In Auction--Only Used Sparingly in 4 Years!-- WOOD-MIZER EG300EC25U Multi-Rip Board Edger, with "E25" Electric Motor Specifications: - No. of blades 2 - 5, Min. distance between blades 1", Blade dia. 350 mm (13.78"), Arbor dia. 3", Blade speed 3,520 RPM. - Feed speeds 0 - 25 MPM (0 - 82 FPM). - Min. board length 700 mm (27.56"), Board thickness 10 - 60 mm (0.39" - 2.36"). - Max. edging width 420 mm (16.54"). - Max. material width 550 mm (21.65"). Equipped with: - "E25" 21.3 kW (29 HP) - 3,520 RPM Blade motor. - 1/4 HP - 890 RPM Blade positioning motor. - 23-1/4” W x 6’ L x 33-3/4” H Infeed roller table, with (4) 2-3/8” Dia. Rolls on 15-1/2” Centers & 47-1/4” L x 2-1/4” H Fence with 6” Inward adjustment. - Galvanized steel anti-kickback fingers. - 4-1/4” Dia. Knurled steel infeed & outfeed rolls, (2) each. - 4” Dia. Steel infeed & outfeed hold-down rolls. - 23-1/4” W x 6’ L x 33-3/4” H Outfeed roller table, with (4) 2-3/8” Dia. Rolls on 15-1/2” Centers. - Return rollers. - 27” x 34” x 17-1/2” H Removable steel chip bin. - Pedestal control, with SCHNEIDER ELECTRIC "MAGELIS" HMI Interface with Touchpad & LCD Display. Complete with: - Safety, Operation, Maintenance, & Parts Manual. - (4) SEMICON Lasers, (2) Currently installed. - (3) Additional blades. - Spacers: (4) 1”, (4) 3/4”, (4) 3/8”, (2) 1/4”, & (5) 3/16”. - Accessories (As pictured).