Select For Sale

This listing Is for a complete line that consists of a Flow Coating line that feeds into a cross transfer oven and back out on to an outfeed conveyor making a 180 degree circuit. The heat exchanger needs to be heated by means of a hot water boiler or similar. Maximum Part width: 305 mmSpeed range: 2 - 10 m/min.Pos. 1 - FEEDING BELT CONVEYOR:For feeding the batches into the flowcoater, Belt with marked area to built a gap for the angle transfer, Technical Data: length: 2300 mmPos. 2 - IMPREGNATION MACHINE VEN FLOW:For flowcoating of profiles in continious production with a waterbased impregnation (viscosity similar to water)The material is is sprinkled on the surface and remains for appr. 10 seconds. After this time a high pressure air knife nozzles will blow the acess materialfrom the surface. The whole cabin is built with fall to the side to collect the rest of the material. It is reused after passing a filter system. The cabin is built of stainless steel. The blowing off of the access material by air knife is effected by a high pressure fan.The machine comprises:1 conveyor system with spray protected roller system length 3000 mm1 sprinkling zone with two nozzle systems adjusted to reach the whole surface of the workpiece. length: 200 mm1 penetration area length ca. 1000 mm time of residence ca. 10 sec1 blowing zone with adjustable knife nozzles air supply with high pressure fan air flow adjustable by frequency converter length ca. 1000 mmair speed ca. 40 m/sec. material supply to supply the two sprinklers with fluid and collector for recovered material.workpiece tolerances:twist: max. 1° on the whole length, straightness max. 0,5mm deviation/m in horizontal and vertical weight distribution: evenly on whole length coating material: waterbased impregnation. Unstable components can not be repositioned when tilted.Pos. 3 - MOULDING ANGLE TRANSFER VEN TRANS 90°conveying from lengthwise direction to crosswise, comprising:1 excenter-transfer arms integrated into the driven infeef roller conveyor. The tacted transfer system allows a minimum distance between the singlemouldings on the following cross transfer system.Technical Data:length of roller conveyor: 4500 mmroller pitch: 185 mmnumber of transfer arms: 22spacing 185 mmtacting cycle: max. 30/min.Pos. 4 - MOULDING CROSSWISE V-BELT CONVEYOR:Mouldings are conveyed by means of various v-belts along the system. The unit is fitted with an insulation cover between the conveyor. A drying tunnel is fitted on top of the unit.Technical data:length: 4000 mmoperating width: 4200 mmnumber of belts: 22distance of belts: 185 mmoutfeed prepared for an additional angletransfer:position of driving shaft in the middlegaps for passing of the carriers of the angle transferPos. 5 - JET DRYING TUNNEL 70 °C:Made of sandwich elements with fire preventing insulation material. The even distribution of air over the full operating width is reached by using slot nozzles on the full width of the tunnel. One combined heating-, fan

John Deere 1010E Forwarder Tracks and Tires Veriga tracks at 90% Used approximately 800 hours Three Nokian Forest Rider 650-45-24.5 tires at 80% mounted on rims and one rim

2004 XL Specialized HG 6000 Vermeer Grinder Has a new end feed. Has less than 6000hrs ran on it. Has new hammers

2015 Vermeer FT3001358 hours Can run carbide to chipper teeth

42 hp, Deutz engine, trencher with backhoe, back fill blade, 72" snowblower, mini skid plate attachment, hydrostatic and 4W drive, ready for work.

Vermeer HG365 Grinder New infeed roll and remote control Ready to go to work!

Hours-1,677 Serial Number- 1VRC312H8K1001097 Low-hour late model grinder That was used for regrind. The machine is very clean and straight for age and hours. Machine Has Full Factory Warranty Remaining Delivery is available at the buyer’s expense

2013 Vermeer HG6000 -6000 hours -CAT C-18 engine -New material output belt that comes with it -Tires and lights good

2017 Vermeer HG6000 Horizontal Grinder -4,400 hours -C-18 -Belts good -No blowby Turn Key Unit

2006 Vermeer TG9000 13’ Tub Grinder, Cat 3412E 860hp with 8900 hours, Heads and rebuilt done at 6500 hours. Width 46 ft Width 11.9 ft Height 165 in Weight 106,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Vermeer HG6000 Horizontal Wood Grinder CAT C16, 630 Hp engine Approx 6300 hours PT Tech clutch; Magnet; Remote 1 1/4", 3" & 6" screens Regular maintenance Work ready

2007 Vermeer HG6000 6400 hours 50 hours on rebuilt motor New belts last year New screen Bought a track grinder and no longer need

2009 Vermeer HG6000TX Grinder -10,350 hours -New Infeed conveyor, -New Chain and roller -New idler roller bearing -New infeed wear strips -New hammer feed drive belts -New anvil bars -New shear edge and cutters -New mill seat new tail belt -New roller lock cylinder and more -Over 150k in repairs done about 300 hours ago Have receipts of all work!!!!!!!!

2018 Vermeer HG2800 Cat C27 950HP Has Cat Engine Warranty to 6,000 Hours or Approx. 10-31-22 Approx 2600 Hours

2014 Vermeer 2300XL Whole Tree Drum Chipper, C13 Cat 440HP with 4474 hours, Infeed, Remote, Woods Ready. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 Vermeer DCR Style Mulcher, New Teeth, Ready to Work Please Call For More Info!

2023 Vermeer Vacuum excavator VX75A1055 -148 hours -500 gallon spoils tank -250 gallons water storage -Remote control boom -74 HP Tier 4 diesel -1,200 CFM vac -3 stage filtration,8 GPM @ 3,000 PSI -Heater box option Fully loaded unit like NEW

2019 Vermeer TR-5300 Trommel Screen, 2,200 Hours on Engine, New Sprockets and New Drive Chains, In excellent condition. Ready for Work. Weight 32,000 lbs Width (transport): 8.2 ft Length (transport): 39 ft Height (transport): 13.4 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Vermeer Tr626 Trommel Screen -2600 hours -Tipping grid -3/8 stainless steel screen mesh Turnkey unit!!!

2013 Vermeer TR626 Wildcat Trommel Screen with 13,000 hours. Recently had all frame work redone – details can be provided. Weight: 47,500 lbs Width: 102 in (8 ft 6 in) Height: 13 ft 4 in Length: 49 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.