Select For Sale

LITTLE VALLEY, NY LOCATION

1997 Timbco 425C Equipped with a CTR Dangle Head Saw with 24" Bar Saw, Rebuilt Engine with 3000 Hours, Undercarriage is 40-45%. Tracks are Good, New Drive Rollers, Enclosed Cab with Heat and AC, Ready for the Woods. Weight 55,235 lbs Length 21'4" Width 9'8" Height 12'2" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Parting out a Timbco 425C, good pumps, Vickers valves, undercarriage, finals, drive motor, engine and more. Let us know what you need shipping available.

1993 Timbco 425D -4xxx on meter -Engine been rebuilt -Just replaced both track rails and sprockets have less that 10 hours on them -Idlers and rollers are in good shape -Everything works -Ac/heat -Radio -33” Timbco bar saw head -40 degree tilt -Cameras on the head and behind cab -All bushings are tight Ready to work very well maintained

Timbco 425D with squirt boom and Waratah 620 processor. Will sell head separately

2004 Timbco 425EX -19000 frame hours -22c Quadco 40 degree tilt head -8.3 cummins -D6 undercarriage -Heat/ac -New Bluetooth radio -Clean-fix reversing fan -Brand new track chains, drive sprockets, track hardware, track tensioner w/spring -Could use some tlc

2005 Timbco 445EXL Feller Buncher, Equipped with a Quadco 22" 360 Wrist Saw, Enclosed Cab with Heat and Air Conditioning, Leveling Cab, Good Undercarriage 70%, Ready for the Woods Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Timbco/Valmet 445 track group, optionally low hours chains, reused pads that are in very good condition. 8 1/2 inch pitch 45 links.

Available for parts. Mid 90s Timbco 445B. Good finals, drive motor, pumps, swing motor, undercarriage and more. Please let us know what parts you need. Shipping available.

Timbco 445B, Cummins engine, rexroth pumps, Cat finals, equipped with Timbco lateral tilt Barsaw. Priced to sell

Timbco 445C with 360 Quadco hotsaw. Cummins engine, rexroth pumps. 28 inch single grouser tracks

2000 Timbco 445D Feller Buncher, Cummins 8.3 Diesel Engine, Hours Unknown, Has 43" Bar Saw with 3/4" Pitch, Heavy Duty Cat D-7 Undercarriage is 70-75%, Enclosed Cab with Heat and Air Conditioning, Repleaced 3 Pumps (New), New Control Valve, $15,000.00 in 6000psi New Hoses installed, Ready for the Woods. Weight 65,000 lbs Length 35 ft 6 in Width 11 ft 2 in Height 12 ft 0 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Timbco 445D. The last of the mechanical machines. 8.3 Cummins, Rexroth pumps, Rexroth valve, in the woods operating today. Equipped with lateral tilt bar saw.

2021 Timber Buddy Mill Operation Comparable to a Wood-Mizer LT70 Kauffman's laser edger 2 strand log deck like new Roller transfer deck like new

Timber Treatment Solutions designs and manufactures turnkey low pressure wood treatment plants of any size which are suitable for use with any of the existing treatment chemicals on the market, whether they are water based or solvent based. These plants generally include: – - Autoclave or rectangular vessel with quick closing door(s) - One or several tanks to store the treatment chemical - Process skid, with all necessary pumps, valves, and pipes - Timber pack handling system, from completely manual to fully automated - Mixing / Dosing System - PC or HMI based control system with our latest plant operating system There are lots of possible configurations of low pressure plant, and our teams will be able to advise the most suitable for you, according to your needs and budget. Plants can be designed for any of the processes usually required by wood impregnation industry, such as Double Vacuum & Envelope WHEN TO USE LOW PRESSURE TREATMENT? Low pressure treatment is widely used, whenever light impregnation of wood by a preservative is required (also called surface treatment or envelope treatment): - To impregnate timber for Use Class 1, such as timbers that will remain dry (e.g. upper floor joists, truss rafters) - To impregnate timber for Use Class 2, such as timbers that are exposed to a slight risk of wetting or damp (e.g. tile battens, CLS framing) - To impregnate construction timber with fire retardant chemical

Timber Treatment Solutions impregnation plants can all be fitted with one of our automated timber handling systems. An automated wood handling and storage system is the best option for treating large volumes of timber in a short space of time due to minimising charge changeover times. This makes annual impregnation volumes of over 100,000m3 on a single plant easily achievable. The automated handling system can consist of anything from a transfer car which changes over one charge automatically to a multi-lane multi-level fully automatic system which only requires operator input once per day. Timber Treatment Solutions are the only manufacturer able to offer the patent pending multi-level timber handling and storage system, which can half or even third the building space required for an automated wood package handling system. There are lots of possible configurations and our teams will be able to advise the most suitable for you, according to your needs and budget.

Timber Treatment Solutions (TTS) manufacturers specialized timber treatment and preservation equipment. These systems are engineered to our specific customers specifications and applications. The TTS systems are turn key with installation and service available. - High Pressure Impregnation Plants - Low Pressure Impregnation Plants - Automated Material Handling Systems - Dip Tanks - Automation available - Hot Oil Treatment - Treatment Tunnels for individual lieces - Timber Incising Machines - Automation and control systems

Timber Treatment Solutions designs and manufactures turnkey high pressure wood treatment plants for impregnating timber to Use Class 3, Use Class 4 and a variety of other requirements. These plants generally include: – - an autoclave with quick closing door(s) - one or several tanks to store the treatment chemical - a process skid, with all necessary pumps, valves, and pipes - a timber pack handling system, from completely manual to fully automated - a mixing / dosing system - a PC or HMI based control system with our latest plant operating system There are lots of possible configurations, and our teams will be able to advise the most suitable high pressure wood treatment plant for you, according to your needs and budget. Plants can be designed for any of the processes required by the timber impregnation industry: – - Bethel (full cell) – this is the most common for treatment of timber to Use Class 3 and 4 - Rueping (empty cell) – this process cycle is used for more specialist lumber treatments, such as creosote and copper oil, where the impregnation rate needs to be reduced on highly absorbent wood species - Lowry - Special cycles using any combination of vacuum, air pressure & fluid pressure phases, which can be designed on request WHEN TO USE HIGH PRESSURE IMPREGNATION High pressure treatment is widely used whenever deep impregnation of wood by a preservative required: – - Sawn or round posts using water-based copper chemicals (UC3 / UC4) - Poles, sleepers, posts using Creosote, Creosote/Oil mix, CuNap & Copper Oil - Construction timber with fire retardant chemical - For specific applications, such as resin or furfural impregnation before curing

Timber Treatment Solutions has many years’ experience in designing and manufacturing timber dipping equipment making our products the most advanced on the market. We are unrivalled in the quality of fabrication and reliability. Our automatic dipping tanks provide a rapid, completely safe treatment process for both the operator and the environment. A robust design and construction ensures the longevity of our products. The dipping tank systems generally include: – - a tank for dipping the timber - a hydraulically raised and lowered support frame to place the timber packs on - a manual or hydraulically operated top clamp There are also several additional options which can be added to further improve the performance of the dipping equipment: – - multiple dipping frames in the same tank to increase throughput - roof structure to protect against water ingress - tilting support frame to aid preservative run off - preservative dosing / mixing system - filtration of sawdust - stirring to homogenize the concentration of chemicals in the tank - heating

Call us at 715.560.3929 - we provide high quality windows for logging equipment, usually at a fraction of the cost of dealer windows.