Select For Sale

2016 CBI 6800 Track Horizontal Grinder, 1000 hp Cat diesel, Radio Remote, Magnetic Head Pulley, Work ready. Weight 86,500lbs Transport length 43’2” Transport width 11’1” Transport height 12’ Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

CBI 400 Grinder

CAT C27 TIER 4F DIESEL ENGINE (1050 HP) PT TECH HPTO15 HYD CLUTCH AUTO REVERSING FAN SYSTEM 40" X 60" HAMMERMILL (24 HAMMER PATTERN) FORGED DRUM OFFSET HELIX ROTOR 8" ROTOR SHAFT, 3.75" THICK, 5400LBS 40" TOP COMPRESSION FEED ROLL LIVE FLOOR W/4 WDH-120 CHAINS, 6 STRANDS WIRELESS REMOTE AND TETHERED REMOTE 60" DISCHARGE STACKING CONVEYOR 16' DISCHARGE HEIGHT UNDERCARRIAGE 700MM TRIPLE GROUZER MAGNETIZED END PULLEY W/COLLECTING SLIDE TRAY CBI MDS - METAL DETECTION SYSTEM

2024 CBI 6800CT -1887 hours -C-27 (1050H.P) -Fully loaded unit -Platinum CAT warranty

2005 CBI 6800T Track Horizontal Grinder, Cat 3412 Engine with 1000 HP, Only 7,566 Hours, Undercarriage is 80% Wireless Remote Control, Few Hundred extra Teeth, Discharge Conveyor with Magnetic Pully, No Compressor, Ready for Grinding. Transport width: 11' 1" Transport length: 43’-2” Weight 89,500lbs - 95,000lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 CBI 6800T Horizontal Grinder, Engine Hours 3,500, Frame Hours 10,900, Clutch Swapped, NEEDS A NEW CLUTCH, Floor Chains New, Slop Box Good, Back Mill Good, Caterpillar 1050 C-27, Floor Redone past 800 Hours, Magnetic Head Pully, Wireless Control, Ready for Work. Weight 86,500lbs Transport length 43’2” Transport width 11’1” Transport height 12’ Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Maximum workpiece height mm. 320 Maximum workpiece width mm. 320 Minimum workpiece length mm 700 Brush diameter mm. 160 Brush rotation adjustable with inverter rpm 0 – 1400 Blower motor power under inverter kw 4 Brush motor power under inverter nr. 4 x kw 0,55 Work speed adjustable with inverter mt/1’ 8 - 45 Feeding motor power kw 1,1 Electrical system MACHINE DIMENIONS: Volt 380± 5% Lenght mm 3350 Width mm 1350 Height mm 2350 Machine weight kg 1150

CEFLA TNS 3650/RBT BELT CONVEYOR146"L x 60" belt conveyor. 0.75 kW motorNOTE: Will need a new belt, not included in the price.

CEFLA TR3500/CT RUBBER ROLLER CONVEYOR48" infeed/outfeed power conveyor, 140" long, rubber roller conveyor.

CEFLA TRC 2000 POWERED ROLLER CONVEYOR72"L x 60"W rubberized roller conveyor with .75kw motor

CEFLA TRC 2500 ROLLER CONVEYOR105"L x 60"W Rubberized roller conveyor with a .75kw motor

Cefla Sorbini T/20-3-STP Triple Head Print & UV Line (3) Print Head System (2) IR Ovens Available Immediately

CEFLA 5 Ft. Wide Single Lamp UV OvenGreat for handing those "extra wide" Panels!Features: -- UV-R Super Focus: This configuration is suitable for reducing the heating effect of the lamps on artifacts sensitive to high temperatures (e.g. resinous wood). -- The particular shape of the lamp parabolas focuses the UV ray beam at the same point of the panel, allowing to reduce significantly reducing the number of lamps needed to dry the paint and avoiding the dispersion of rays, also guaranteeing significant savings in terms of space and energy consumption. -- This configuration can be integrated with the "SMART-THICK" system for adjusting the thickness of the pieces in line, usually on roller application lines.UV-R SP: Allows the cross-linking of the paint applied even on the edges of the pieces, thanks to the use of inclined lamps and a greater energy impact of the lamps themselves on the edges.UV-R: Equipped with an electronic system for regulating the power of each lamp; it also allows you to automatically activate the energy-saving function by checking the presence of material under each lamp.The Electrical Panel is integrated into the machine body and does not require additional spaces in the line layout.

CEFLA - MITO, ...Complete Spraying System with SORBINI Cleaning Brush.Reciprocating Feed Through System for Waterborne & Solvent-Borne Coatings: The max. flexibility and technology for the continuous spraying of any kind of raised panels.Features: -- Machine designed with a solid structure: LASER 3D; full accessibility, thanks to the wide use of glass superficies, access doors, and extractable parts. -- Conveying System with: CFB Belt with sealed edge, driven by inverter. -- Axis driven by the powerful brushless motor and by a sophisticated toothed belt handling system, with recycling sphere bearings. The best performances in speed, acceleration, and the softness in guns motion allows to achieve the max. application quality. -- The central axis holds: (1) Gun supporting arm (removable), equipped with quick-release (predisposed for max. 4 guns); complete with: Manual height adjustment, (3) high pressure lacquer feeding circuits with recycle; lacquer filters with stainless steel fittings. -- Exclusive pressurization flows analysis and sophisticated air diffusion plenum with double fan for air intake and filtration results in: Higher lacquer saving, better machine cleaning. Circulation provided by floor mounted MZ RLQ 560, Direct-drive 4 KW , 1755 RPM motor. -- Tanks with supporting areas for filters by COLUMBUS or ANDREAS-type filters.Electronic Scanner for: Shape reading and workpieces positioning; max. efficiency in managing the guns' spraying.TECHNICAL FEATURES:Total length of the machine: 4,650 mmTotal width of the machine: 3,850 mm (4,210 mm with fan)Machine structure height: 2,500 mmElectronic control unit with: PLC and software for machine managing.Main control cabinet: Pressurized, placed at the machine infeed, along the service side complete of cable and wiring system for connection to all the users.Spraying parameters management is operated by PLC:Working programs setup, measurements of the lacquered surface & lacquer consumption, 5" color touchscreen display for diagnostic and control; possibility to exchange data from and to PLC managing complete Lines.Possibility to manage pumps for color change/washing (up to 4 pumps). -- Comes with: 2006 SORBINI/CEFLA VS/33-ACT-F, 460/3/60 Panel Cleaning Brush with brush for the top roll followed by a nozzle blow off station. (1) Head, 53" width cap. Top brush head; features timed rotating air blowers, air liner blower with nozzles. Upper mounted Anti-static ionization bar; 400 RPM brush speed.With CEFLA TM 3000, 600/3/60 V, infeed belt conveyor. -- Line is disconnected/dismantled per last (8) photos.

CEFLA PRIMA 1,300 mm (51.18") W Single-Arm Automatic Oscillating Spray Coating System, with (4) Spray Guns & (2) PumpsSpecifications: -- For water or solvent-based coating of wood, plastic, glass, & metal. -- Feeds right-to-left. -- Working width 1300 mm (51.18"), Min. panel length 250 mm (9.84"). Max. panel thickness 60 mm (2.36"). -- Paper roll width 1520 mm (59.84"), Paper roll length: 2400 M (7,874'), Paper roll dia. 520 mm (20.47"). -- Conveyor speeds 1 - 3 MPM (3 - 10 FPM). -- Chamber size 11’ W x 6’ L x 3-1/2’ H.Equipped with: -- Heavy-duty spray arm, with (4) C.A. TECHNOLOGIES "BOBCAT "66-250" Automatic air assisted airless spray guns with Max. fluid pressure 2,500 PSI, (2) High pressure feeding circuits, & Electronically-controlled oscillation speed. -- 11’ L Disposable paper-covered vacuum belt conveyor, with 2-1/4"; Dia. Infeed & Outfeed rollers on 4-3/8"; Centers, & Vacuum unit. -- Automatic paper payoff & take-up system, with Unwinder with adjustable mechanical brake & Winder with Air motor. -- Automatic panel shape & panel detection system. -- Removable overspray tanks with Filters. -- Natural air inlet, with 2-Stage Large-surface dry filters. -- 4.6 kW (6 HP) High efficiency exhaust fan. -- Dual chamber lights. -- Control, with PLC, SCHNEIDER ELECTRIC "MAGELIS" Graphic Terminal with 6" Color LCD touchscreen, & Diagnostics.Complete with: -- Manual. -- (2) C.A. TECHNOLOGIES "C-20 70-1500" 2 GPM 20:1 Cart-Mounted Stainless Steel Fine Finish Pumps, Each with Fluid volume 2 GPM at 60 Cycles/Min, Max. fluid pressure 2,000 PSI, Max. air pressure 100 PSI, & 5 Gallon Siphon hose assembly. -- C.A. TECHNOLOGIES "54-405" 5 Gallon Pail-Mounted Stainless Steel Mixer. -- 60"; W x 3’ L x 36"; H Infeed & Outfeed Motorized Roller Conveyors, Each with 1-7/8"; Dia. Coated rollers on 4"; Centers & 1/4 HP - 1,700 RPM Motor.

CEFLA EASY 2000/D Automatic Spray Finishing Machine: 2010 CEFLA "EASY 2000 D" Reciprocating Sprayer: -- Sprayer fabricated using coated sheet panels, uses a Centrifugal fan for intake of room air to upper air diffusion hood inside of cabin to pressurize the spray area. -- Conveyor speeds variable from 2 - 8 MPM. Belt width capable to carry 1,600 mm (5') wide charge through the machine. -- Machine is PLC Controlled. The Superior Coating application is achieved by utilizing a "back spray" technique. The machine uses a slide-out material recovery system consisting of (2) rollers. -- Infeed & outfeed Conveyors with lift cylinders. -- Includes: (2) Reciprocating arms traveling on polished rods, hydraulic shock absorber provides smooth operation. -- Parts are read at the Infeed of the Conveyor by a photodiode light bar that reads the size of the part and sends that information to the PLC to control the Spray Gun action. -- Machine is equipped with (2) paint circuits.THIS MACHINE IS CURRENTLY BEING RECONDITIONED WITH OUR SUPPLIER IN ITALY AND WILL BE AVAILABLE APRIL 2025.

2019 CEFLA, model ROC 3 D. Reciprocating Spray Machine:This sprayer can easily run at 30 feet per minute Machine consists of --a tilt-able up infeed belt conveyor with the Electronic Reading bar located over the entire width, this bar reads the parts as they enter the machine which controls the Gun spray pattern. --Parts are fed through the spray cabin by means of a Patented continuous CFB belt conveying system. --Sprayer is equipped with (2) two roll Overspray recovery systems. Belt cleaning is done by means of a counter-rotating roller's with scraper and belt cleaning unit. The rollers are fitted on the "cleaning" trolley which is pulled out from under the machine longitudinally by manual control. Motorized outfeed belt conveyor, tilt-able up to make access to the cleaning trolley easy. -- (2) Oscillating arms equipped to accept a maximum of (8) guns, driven by a Brushless motor's, the PLC in the control panel automatically triggers the guns based on thier size and location on the belt. -- This sprayer has (2) two separate lacquer feeding circuits and a pressurized cabin with both incoming air filtration and exhaust filtration. -- Air is pulled in from (2) air intake ducts (positioned between guns) above the slanted perforated top panels, perforations help to reduce turbulence -- Large front viewing window/access panel.

CEFLA ROCTRE D Automatic Spray Finishing Machine: for HIGH VOLUME PRODUCTIONThickness: Max. 50 mm (2"); Min. 5 mm (0.2").Maximum Line speed: 20 MPM (65 FMP).Equipment Specifications:CEFLA, model ROC 3 D. Is a Two Arm reciprocating Spray Machine: -- Parts are fed under the Part Reading Bar to measure size and spray parameters on a continuous CFB belt conveying system. -- Lacquer recovery and belt cleaning are accomplished by means of a "cleaning trolley" located under the exist end feed belt. Made up of counter-rotating rollers with scraper and belt cleaning unit, with 3 rollers and stainless-steel troughs: all the rollers are fitted on the motorized trolley longitudinally removable by hand pulling of trolley out. -- Powered outfeed tilt able belt lifts to approach the cleaning trolley. -- (2) Oscillating arms equipped to accept a maximum of (8) guns, four per arm and driven by a Brushless servo motor.There are (2) Separate lacquer feeding circuits with recycling system. -- This is a fully pressurized spray cabin with an exhaust air filtering system for overspray using double dry filters set, primary filter and secondary . -- Electronic control cabinet to monitor spraying functions.Booth consists of sandwich paneling and air is pushed in through (2) air intake ducts (positioned between guns) above the slanted perforated top panels made up of fine filter material help to reduce turbulence. parts running through the sprayer can be viewed by means of a large front viewing window/access panel which can be lifted to access the guns and interior of the sprayer. Note: EX-FACTORY’s Logistic Department is experienced and set up to provide “Full Service Logistic"; from Overseas Suppliers to your Door. …Packaging, Container Loading, Ocean Freight, Marine Insurance (door to door), US or Canadian Customs, Duty and domestic shipping to your Plant Door.

Cefla Roctre/D Reciprocating 2 Head Spray Machine 1600 mm wide spray area.

Cefla Roctre/D Reciprocating 2 Head Spray Machine 1600 mm wide spray area.