Select For Sale

West Salem Vibratory Conveyor.20" wide 12' long. Located in MN #00786

WSM - 2852BH, ...Heavy Duty Hammermill/Shredder. -- 200 HP - 1,165 RPM Motor -- Infeed opening size: 52" L x 28" W -- Infeed with: Feed roll, 1-1/2" teeth with 6" spacing. -- (2) Types of Hammers: One a rounded style with hard-faced tips.Machine is part of a Pallet Recycling Plant and includes: -- Pallet Feeder -- Dual Chain Conveyor. -- Vibratory Feeder. -- Inclined Oscillating Table.

480V | Model # 1662HT | Serial # 167808

Estimated screen area per deck 134” width x 240” length. This screener will need a new bearing for the main shaft, and some welding of the internal framework. There are spare hangers, universal joints, support arms.

Wood Pellet Manufacturing Plant Equipment;Complete with the following features: -- Design capacity 15 tons per hour. -- (1) Pellet Mill (Pellet Press) – custom built in USA and was producing at a rate of 4½ tons per hour. Comes complete with spare parts. -- WEST SALEM Model 4-4-60S Hammer Mill. -- Bulk storage. -- Conveyors to bagging system. -- Blowers Cyclones & Piping.NOTES: &#9679 Plant was planned for several pellet mills but was shut down due to lack of sales. &#9679 Operated only 3-4 years but has been down for a few years now. &#9679 All equipment remains installed. &#9679 Wood supply was from several sources: processing plants by-product, shavings from planer mills, finger jointing plant, and ground trim blocks. &#9679 No Dryer - Owner using it. &#9679 More details on request. &#9679 Professional rigging is available.

Western Machinery Group Profile Grinder Good Condition 3 Phase

3 phase, excellent condition.

WESTERN PNEUMATICS WP12 Rotary Air LockSpecifications: -- Discharge opening: "10 x 16" -- Gear motor drive: DODGE 5 HPFeatures: -- Flange mount for installation.

WESTERN PNEUMATICS HEAVY DUTY FINGER JOINTER WITH THE FOLLOWING EQUIPMENT & FEATURES: -- Right & Left Shaper Section: Thickness Capacity: 3/4" - 2" maximum; Width Capacity: 1-1/2" - 8" maximum; Length Capacity: 5" min. - 36" maximum; -- (2) Scoring Saws with 7-1/2 HP - 3,600 RPM motors; -- (2) Trim Saws with 7-1/2 HP - 3,600 RPM motors; -- (2) Shaper Spindles are hydraulically powered; direct driven @ 3,600 RPM by -- (1) 60 HP Hydraulic Power Unit with (1) cartridge unit per spindle. Hydraulic conversion was performed during the first year of operation. -- Western's 2-1/2" wide feed chain with lugs on 9" centers; 15 HP variable speed drive with up to 120-lug per min feed speeds; with angle transfer conveyor, air bag pressure head with quick-change feature & brush hold-downs -- APQUIP Extrusion Type Glue Applicator complete with mixing system. Currently arranged for 3/8 finger joints including (4) 3/8" glue combs -- Manual Corner Transfer to the assembly section. (allows for inspection and rejection of blocks for poor joint quality, missing proper glue spread, etc. prior to going into assembled boards) -- 12' Pre-Assembly Infeed Conveyor with feed speed ramp up/down; with side alignment rolls and dual top and bottom pre-assembly rolls -- Flying Cutoff Saw operating from below -- Assembly Press: 20' board capacity with hydraulically powered press -- Automatic Cycling Assembly Section: Feed speed varies automatically from 50 to 200 FPM, depending on incoming block lengths. Boards advance through the Cutoff Saw to a moveable limit switch where they are cut to length with a bottom-mounted 7-1/2 HP Flying Cutoff Saw arranged for continuous non-stop assembly. The cut to length board drops down into the squeeze chamber while the next board feeds out and above the preceding board where it is cut to length. Pressed lengths are pushed out onto material outfeed arms by the following board

Baghouse (Green) W/ 200HP Blower, 75HP Blower, Catwalk and Steps, down and ready to Load

Factory refurbished 328 Blower available immediately

60" with 200HP Electric Motor

1997 Western Star Sleeper Truck 150k miles on rebuilt Cat C15 475hp 13 speed Air ride Dual wetline New rubber Road ready Retiring

Western Star Log Truck, CAT motor, 7000 Hood Loader, $80,000

2002 WESTERN STAR LOG TRUCK SELL WHOLE OR PART OUT UNKNOWN MILEAGE 2003 SERCO 8500 LOADER CAT C15 475HP 18 SPEED FRAME IS BAD NEAR LOADER REAREND IS OUT OF FRONT PIG

2012 western Star Log Truck Prentice 2124 loader Cummins Def deleted Recent radiator 18 speed True mileage around high 300k tac shows in the 600k Can use hour meter to figure out close true mileage Fresh fluids and rear ends checked Work ready Now using landing loader and no longer need truck

1987 Western Star Log Truck Rebuilt Cat 3406B 13 speed Rear tires at 80%, fronts at 60% Barko 80 loader Using daily

This 2018 Western Star 4700 is powered by a DD13 Detroit engine with an Allison automatic transmission, and 40,000 lbs rear ends. It has 11r24.5 tires on it. The truck has 521,866 miles. The truck is work ready, extremely well taken care of, and not one problem at all. If interested in this truck call Gavin 601/394/7796 Tim 251/366/3237 Kameron 251/242/5493 The truck is located in State Line, Mississippi, 467 St Peter St, 39362

2022 Western Star 4700SB Grapple Saw Truck -10000 miles -470 Horse DD13 Engine With an Allison Auto Transmission -Copma 650 Crane with 112Ft Vertical Reach -Mecanil SG280 Grapplesaw with 25" Bar -Has its own platform to mount with yard mat space beneath -Extra Large Utility Boxes with locks -Electric and Air Brakes for trailers Truck is loaded and like new!!!! -Pintle Hitch mounted and Extra Receiver Hitch