Select For Sale

Hammer Mill. This machine is a Williams hammer mill. Item #C549

Williams Horizontal 50" Grinder with Webster Vibrating Conveyor s/n 20492, 200hp motor

Williams Hog S/N 14482 150HP Electric Motor

WILLIAMS hammermill S/N 15958. Top opening approximately 12" x 18".  2 1/2" fixed wide hammer type. No motor but base for direct connection.  Top feed hopper included. Used to grind shavings. $4,800.

Williams Hog W/200HP MTR

MLS Number 10791295 Williams Horizontal Wood Hog 200 HP 24" wide 16 Ft vibrating conveyor With soft start

Williams Hog Grinder s/n 14028, 40" cutting head, 20"x29" top opening, 150hp motor

Williams Hammer Hog 30 with 125HP Motor S/N 20053

Williams 34KS Hammer Hog

2015 Wilson Pacesetter Trailer Hopper bottom Was used for grain PRICE REDUCED

2006 Wilson Pacesetter Trailer Hopper bottom Was used for grain PRICE REDUCED

WILTON 4421-2 20" Pedestal-Type Disc SanderSpecifications: -- Table size 10-1/2" x 27-1/2", Table tilt 45° Out/30° In, Table can be lowered below disc to accommodate large workpieces.Equipped with: -- 3 HP 1,720 RPM Direct drive motor, Low voltage protection switch. -- Positive lock rack & gear table tilt.

WILTON 4421-2 DISC SANDER ---Price Negotiable---Make an Offer!--- Heavy Duty for Wood, Metal, Fiberglass, or Plastic! - Pedestal-Type Disc Sander - Table size 10-1/2" x 27-1/2", Table tilt 45° Out/30° In, Table can be lowered below disc to accommodate large workpieces - 3 HP 1,720 RPM Direct drive motor, Low voltage protection switch - Positive lock rack & gear table tilt

WINTERSTEIGER - DSG 150 ECO, ...Thin Cutting Frame SawSide & Center Guides: Fitted as standard on the basic machine to guarantee the broadest possible range of application. Specifications: -- 11 kW (15 HP) Main motor; 0.3 - 1.5 MPM feed speeds; 210 mm saw frame stroke with (450) strokes/Min. -- 30 - 216 mm Cutting height, adjustable as required; max. +/- 0.5 mm difference in block height. -- 60 - 150 mm Cutting width (side guide); (2) 23 - 70 mm cutting width (using center guide); (2) channels max. 72.5 mm using 7.5 mm guide or with (5) channels max 24.5 mm using variable block width; 300 mm min. block length. -- 1.5 mm Cutting accuracy; +/- 0.2 mm Cutting loss (depending on saw length). -- Max. (30) saw blades (excluding scraper saws); (3) 120 mm sawdust extraction tubes. -- "Air Jet" Module: Cleans the lamellas and saw blades during the sawing process by blowing away the sawdust; cools down the saw blades during the sawing process and cleans the shaving space of the saw blades. -- "Air Jet" also increases the saw blades life and improves the lamella's accuracy. Sawdust-free lamellas can then be glued immediately after cutting.Comes with transformer

Wintersteiger DSG Sonic Frame Saw

Section of WIREWAY HUSKY Teardrop Pallet Racking Equipped with: (4) 18,000 Lb. Cap. 8-1/2’ H x 3-1/3’ W Teardrop vertical frames, with 3” W x 1-5/8” Thick Frame beams, Step beams vertically adjustable on 2" Centers. (8) 9’ L x 4-3/8” H x 2-5/8” D Step beams, with 1-3/8” H x 1” D Step.

MLS Number 10684323 Wisconsin Automated Machine C-450 Tennoner Single end tennoner Automatic double head coping tennoner Model C-450 Serial: C-450-6901-00 230 volts, 3 phase, 60 Hz. Allen-Bradley and Motortronics electrical Motors are 230 volts 48 full load amps. 15.2 amps on largest motor

WISE Model 1525 Hinge Jamb Machine; Designed for quick and accurate hinge patterns.Specifications: -- Jamb length up to 8', hinge size unlimited, radius 1/4" or 5/8", jamb width unlimited. -- Equipped with: durable accurate linear glide base, quick change out for variable parts. -- No templates are required, and additional stop bars are available.

WISE 5200 Twin Stair Trencher; 2" x 12" Max. stringer size, Semi-Automatic operation.Specifications: -- 5 HP Belted motor to "top & bottom" 10,000 RPM spindles, T & B heads are arranged to jump in & out to facilitate open plan stairs; -- Automatic pneumatic clamping of stringers, spring loaded side pressure to keep stringers against the fence. Features: -- Mirror-image routing on (1) pair of stringers at one time, graduated template automatically sets up to stated tread & rise, cuts standard wedge taper for both treads and risers.Includes: -- Heavy Duty TYLER Spindles, built-in jump dado function, clamp, and feed system.

Customer machine - Wolfe Ridge 35 SHO Box Wedge is up for sale. Minneapolis, Minnesota area. $19,500 obo. ~ 50 Hrs. No expense spared. Upgraded 25Hp Honda 800 EFI w/ electric start, 30” Stroke, Sorting table extension, Safety Blue custom color, 3.5” Box Wedge, Single Knife & bolt on 4-way, 12-way Wicked Wedge on it’s own single knife, Hitch wedge holder, 24” & 30” Pull back arms, Limiter Plates for 30”, 24”, & 18” splitting, 6-second cycle time, 38 GPM double pump, Auto-cycle valve, Oil Cooler w/ thermostat control, LED Taillights. Call Brent - 952 two 1 two 122 three.