sawmill Equipment For Sale

Baker 2-Head Resaw 20 HP Motors Return Conveyor

Model 3650E with Baker (3) Strand Infeed Deck Excellent condition Hydraulic over electric general factory networks. Hooked up to power and ready to be demonstrated.

2 strand transfer deck, 28" wide x 14' long, #80 roller chain, no drive, good condition

BAKER C 4-HEAD Horizontal Resaw w/Powered Return6" Wide x 12" high cap. Resaw; standard spring blade tensioning system;Specifications: -- 13'-2" x 1-1/4" x 0.035 blade provides thin kerf savings; quick & easy blade height adjustments. -- Wheels: 28" Dia. CNC machined, dynamically balanced, all-steel band wheels, (4) bolt flange; rough top feed belt combines with opposing side feed rolls and air pressure hold over rolls; idler hold downs . -- (4) 20 HP Total Enclosed Fan Cooled Motors; Thin-kerf technology and the Baker Low Profile Flat Guide System generates up to 60-70% less sawdust and up to 25% more boards, easily out-producing a gang rip. Complete with: -- Hydraulic variable feed speed from 20 to 120 FPM (6 to 36 MPM) with a tank, flow control and remote feed shutoff; powered side feed rolls. Includes: -- Powered conveyor, powered return conveyor, NEMA electrical panel with the starters, motor overload protection, remote start/stop stations.6" x 6" Square dust collection with a 90° adapter chute to a 4" dia. outlet (can be rotated in (4) directions); 600 CFM required for each drop.

BAKER BBR-O 2-Head Horizontal Band ReSaw Specifications: -- 12" Wide x 12" high cap.; dual 30 HP (22 kW), 3-Ph. TEFC electric motors. -- 28" CNC machined dynamically balanced all-steel band wheels. -- Fully variable speed feed rate from 20-120 FPM controlled by a hydraulic flow valve to dial in your cut quality. -- Adjustable blade guides and spring blade tensioning system. -- Proven workhorse, ideal for sawmills, pallet manufacturers, and lumber processing operations looking to increase efficiency and reduce material waste.Note: Machine in excellent condition, used moderately in an inside operation.AKA Model CX 2-Head

Baker model a bandsaw with return conveyor

2008 Baker MDL BBR-O 2 HD Band Resaw S/N 08-4001

Baker Short Log Circular Tri Scragg Mill

BAKER Model 3640E Blue Streak Electric Sawmill Like New BAKER Model 3640E Blue Streak Electric Sawmill S/N 07-570. 36” diameter log x 24ft. maximum length 40 HP main motor with 10 HP HPU wired for 460 volts, separate control panel on pedestal to turn the system on/off. Includes an Inline Debarker cutter that travels with the head while it travels down the log. Has the Trailer Package, and 10” wide x 12ft. Roller Conveyor Model BCS-O S/N 07-642 for the outfeed, with manual foot pedals kickers to send the boards to the right or the left, and includes lots of extra sawblades. Current new price over $100,000. This was built in 2007 but has had very little use and has been stored inside. See photos of on our web site. Inventory No.KF1.

Baker Band Resaw BBR-O Return Conveyor

Stationary Baker Blue Streak Baker Coresets computer set works with 8 board sets and 8 core sets 74HP Kohler Diesel (Does not require DEF) Large 28'’ precision machined solid steel band wheels I-Beam frame with solid steel bunks Up to 40'’ diameter logs Moveable guide opens to 36'’ wide cut Large easy to see measurement dial Standard 1.5'’ or 2'’ blade option Cutting length 20'6'’ Board drag back return Fully hydraulic, log loader, clamp, fence arm, toe rollers, variable speed dual chain drive. head raise and lower, log turner forward and reverse up and down, movable guide, built in 10 gallon tank, & controls Blade enters clean side of log after first cut and rotation operator controls in one convenient location Four post heavy duty tube frame head 23 gallon frame mounted fuel tank Hydraulic Blade tension 5 gallon tank with dual valves for blade lube drip baker bullet guides

Baker Band DBL End Trim Saw with Belt Waste Conveyor & Hyd Drive

Accepts material up to 12" x 12" and uses a 12"-wide conveyor Main Drive Motor: 30 HP TEFC Variable feed speed from 0-95 feet (0-29 m) per minute 28" Dynamically balanced solid metal band wheels 4" diameter dust outlet requires 500 CFM REDUCED LOW HOUR MILLWORK MACHINE

12" Baker BBR-O Single Head. 30hp Motor. Located in IA. #C968

Baker Furnace Dry Kiln 110volt 3 phase Excellent condition

Baker Furnace Dry Kiln 110volt 3 phase Excellent condition

12" capacity 25HP motor 460 volt 3-phase

Baker Dual Head Re-saw (horizontal) 1 1/4" band, 16" cant capacity. 2 Baker turn arounds with cant turners and 4 Baker brush de-dusters. All machinery has been stored in a building since we stopped sawing in 2008. Please call with any questions.

1995 Baker MDL BBR-O 3HD Band Resaw

2010 Baker 2hd Resaw with return. #00901 More Photos Coming Soon!