Stationary Wood Chippers For Sale
Category
Wood Chippers - Stationary
.gif)
69 Results Found
Precision 58" Chipper - Model 58-60-16 6 Knife 150 HP Motor
Call for Price
The seller has confirmed that this 96" Precision chipper is in good working/running condition and is ready to load. This was not heavily run. This came out of a chip plant in WA. Model 96.27 - Horizontal feed - Side discharge - 4-Knife whole log chipper - 8" thick chipper dissc - Built in disc brake - Extended front shaft for hydraulic starter - Hydraulic starting motor - Side discharge pipe with motorized outlet adjustment - 27" maximum log diameter - Many spare parts and knives included - Average production rate: 125 tons per hour - No hydraulic pump - No motor - an 800HP one can be added for additional cost though... The photo's show the optional extended shaft and hydraulic starting motor which is a special feature....
Complete chip plant includes: - The infeed is 12’ above ground level. They were feeding it one log at a time with a shovel. - There is a single chain 12” wide leading to the debarker. - The debarker is a Salem 20” ring debarker with mcdiarmond controls. - From the debarker it goes through I think is a metal detector. It’s is enclosed, 8’ long with a belt conveyor. - 75’ of 3-strand chain that reduces to 2-strand chain for 35’ then goes to another 2-strand chain for 12’ then goes into the chipper. - The chipper is a Precision with 2- 400 hp high efficiency 3 phase motors. - From the chipper the chips drop onto a 42”x50’ inclined belt that leads to the 2 deck screen. The screen is 92”x20’ - The waste goes on a 9”x20’ incline belt and dropped into a truck. - The chips go out on a 3-strand 100’ conveyor (strands are 14” wide) to a radial stacker for loading trucks. The stacker belt is 42”x65’ - Chips can be redirected to blower unit system that will transport them to a rail siding to so they can be loaded into a rail area. It starts out with 75’ of 12” pipe running on the ground. Then it sweeps straight up to a height of about 24’ and goes 150’ to a siding across the county road. The chip loading facility is intact. - The hog is located back by where the logs are loaded onto the chain going to debarker. Here’s a list of the conveyors going back to the Kockums hog. It has a 24”x36” opening at the top. - Conveyors: 12”x100’, 12”x 25’, 12”x60’. All of these conveyors are 1 strand steel.
Precision 58" 6 Knife Chipper w/Horizontal Feed Top Discharge S/N 3135
Precicion 66" Chipper 6 Knife Horizontal Infeed / Top Discharge S/N C-2865
48" 3 Knife Chip Pack S/N C-1029 75HP Electric Motor 5'x 5' Chip Screen
2001 Precision 58" 6 Knife Chip Pack 150HP Elec Motor S/N 3355, 6' x 6' Chip Screen, Cyclone & Pipe S/N S-2375, Precision Dual Trailer Loading System.
2017 Precision Husky Drop Feed Rechipper - $60k Model 5860 15 Serial C 3733 6 knife Comes with 150HP motor
48" Precision Chipper with 100hp motor, vibratory conveyor feed included. $12,000 Call 706-271-8444 or 423-584-7380
Precision 58" dia, 6 knives, COMPLETELY REBUILT!! comes with warranty, BRAND NEW condition! ready for production
Precision 58" dia, 6 knife, hard surfaced anvils, Kwik-Change knife system, THIS UNIT IS BRAND NEW!! in-stock and ready to ship
58” Precision - Husky Chipper - 58” RH Chipper - Chipper Size: 58-15 - Serial #: C2555 (built in 1993) - QTY 3- new sets of chipper knives (19.625” x 4” x 0.375”) - QTY 6- used sets of chipper knives (19.625” x 4” x 0.375”) - QTY 1- 150HP Motor (old style) HP: 150 RPM: 1780 FRAME: 445T HERTZ: 60 PHASE 3 - SN: U1950114132 - Spare Parts: (6) Fan Blades or “Paddles” (2) Horizontal anvils + (1) Vertical anvil (1 ea. per set) (11) Counter knives (6 per set) Feed Plate Background: - Incredibly reliable machine for 30 years (installed in July 1993) - Rebuilt most recently in April 2023 –including belly plate - Only missing component in “complete rebuilt set” is the belly plate - Previously handled waste from 5MMBF/year post mill operation for 30 years without issues, rebuilt as needed - We needed to upgrade to a larger chipper once we started adding an additional 5MMBF/year scragg mill operation and the additional sideboard waste - Spare / used parts value ~ $17,100 Call 800-459-2148 for more info.
75" Precision 4 knife chipper with side discharge. Progress 7 x 7 Chip Shaker. Will not separate. Call 800-459-2148 for more info.
Used Precision horizontal stationary chipper, 66”, 6 knife. Precision Husky stationary electric chipper Horizontal infeed Bottom discharge 6 knife Knife size: 21 ½” x 6” Choice of electric motors available Can provide a video of shaft/disk rotating with dial indicator on shaft. Chipper was cleaned & repainted, we do have photos before we painted it Additional photos, vidoes and information available. Contact us for a delivered price.
75" Precision 6 Knife Chipper S/N C-1732
Precision 58" 3 Knife Horizontal Infeed Top Discharge
48" dia. 6 knife wheel with 3 blocked, bottom discharge, good condition