Equipment For Sale

ALLEGHENY - 18-250C, ...Paper Shredder -- 20 HP Motor -- (250) Sheets per pass -- 1/2" Straight cut -- Loaded onto your Truck

ALLEGHENY 20-350C DOCUMENT SHREDDER -- 40 HP Motor -- 7/16" Cut Width -- Feed Opening 20" -- Dimension 70" x 107" x 55" -- Weight 6,295 lbs

2 unused 300 HP auto-transformer coils 460 volt open style-no enclosure 2 coil design. Price is $2500 EACH or best offer.

Allen-Bradley Centerline 600 Amp MCC w/30 Buckets

Allen-Bradley Centerline 600 Amp MCC w/34 Buckets

Alliance Forestar 343 -750-50-26.5 on Fabtek rim- low hours

ALLIED SYSTEMS H5C TRACTOR WINCH, HYDRAULIC RECOVERY STYLE WINCH TO FIT KOMATSU D51EX-24 DOZER. 68500# MAX LINE PULL, 53 FPM MAX LINE SPEED. INCLUDES: ALL ATTACHING PARTS, FREESPOOL, AND RIGID DRAWBAR. WEIGHS 2100 LBS. REQUIRES KOMATSU OEM LEVEL 1 TRACTOR RIPPER CONTROLS 4CD91-A, OR KOMATSU FIELD FIT KIT #7CB71A-A-T. (2)OPERATORS AND MAINTENANCE MANUAL W5C 3-ROLLER FAIRLEAD. WEIGHS 500 LBS. TOTAL WEIGHT = 2,600 LBS. NO ROPE

G/N H6HT1BK49 ALLIED H6H HYDRAULIC TRACTOR WINCH, POWER CONTROLLED WINCH, BUILT TO FIT KOMATSU D65E/PX-16/17/18. WINCH IS PLUG & PLAY INSTALLATION, POWERED BY RIPPER HYDRAULICS. INCLUDES ALL ATTACHING PARTS, FREESPOOL, BRAKE OFF AND DRAWBAR. 88,800# MAX LINE PULL, 137 FPM MAX LINE SPEED. WEIGHS 3050 LBS. WIRE ROPE, 2/3 LENGTH, 1" X 154', IWRC 6 X 19 EXTRA IMPROVED PLOW STEEL, EQUIPPED WITH FERRULE, TAIL CHAIN, AND HOOK. WEIGHS 304 LBS. NOT INSTALLED, SHIPPED WITH WINCH.

hr.? 12" tracks, 50% track wear, a good working machine with a smooth running engine. write for info: Deer Run Lumber 2013 Center Rd. Mifflintown, PA. 17059

Alpha Brush KS-LS Sander

The VICTORY machine is a “heavy duty” linear sanding machine, that can be supplied with sanding drums or sanding disc’s depending on the application in the different industries. The machine comes standard with motorized adjustment, but can also be supplied with 14” PLC control with memory, so different programs can be stored & the setup can easily be done. The top/bottom drums comes in diameter of 400mm (16”) & side-heads comes in 300mm (12”) diameter, which will ensure better abrasive life. When machine is supplied with disc’s, each disc is 300mm (12”) in diameter. LS-TS- Offset Heavy duty motorsEasy changing of abrasivesHeavy duty constructionExtra large sanding wheelsTiltable side-heads Thickness of work piece: Min 0mm - max 150mm (6”)Conveyor Roller width: 300mm ( 12” )Conveyor motor: 0,75 kwSpeed of conveyor belt: 3– 15 m/min. ( 9-45 f/min)

Altendorf WA6 Sliding Table Saw Adjustable Scoring Blade Single phase - 230 V Overhead guard

1999 F 92 CE Altendorf 3200 Slid Table Saw S/N 99-11-802 220 Volt

Nice Altendorf 12=14" TKR 90 Sliding Table Saw, owner is retiring 14" blade with scoring 7.5HP Motor 3 Phase

Altendorf F45 Slider

Altendorf Sliding Table Saw 3400 mm

Altendorf F45 Elmo Sliding Table Saw

Altendorf Sliding Table Saw

ALTENDORF F5 (aka Herbrock F5) EDGEBANDER (W/PRE-MILL & CORNER ROUNDING) + EVA/PUR GLUING TECHNOLOGY: -- Specifications:Working Capacity:Min. workpiece width: 80 mm; min. workpiece length: 160 mm; min. workpiece height: 8 mm; max. workpiece height: 50 mm; edge thickness in coils (min./max.) 0.4 - 3 mm: 23 FPM (7 MPM) Fixed Feed Speed with indicator light for panel spacing. Features & Equipped with: 15" LED Smart Touch Control with: Touchscreen display with integrated operational/maintenance software. -- Pullout workpiece support to assist in the processing of larger work-pieces. -- Top pressure beam with (2) offset lines of rollers for equal pressure distribution on the workpiece. -- Chain feeder with a fixed speed of 7 MPM (23 FPM) and rubber grip pads for maximum grip on the workpiece. Working Units: Pre-milling unit with: (2) 1.1 kW Independent motors running at 12,000 RPM and diamond-tipped cutters; Manual positioning of the depth of cut between 0 – 2 mm; (2) diamond-tipped cutters included. -- Edge feed for coiled material: 0.4 – 3 mm Thick coil stock. -- Guillotine trimming unit for: Precutting of PVC/ABS edge band material 0.4 – 3.0 mm thick. Teflon coated gluepot with: (3.5) Minute heat up time; 1.5 kG capacity. - Glue is applied using a fine adjustable glue roller and quick-change System, as well as monitoring of the heating element; pneumatically feed controlled glue unit capable of processing PUR & EVA hot-melt glue. Pressure unit with: (1) Large motor-driven roller and (1) conical roller operating pneumatically. -- End trimming unit with: (1) Motor, 0.35 kW, 12,000 RPM. -- Multi-functional trimming unit for: Radius & flush trimming and bevel trimming of thin edges with (2) independent motors, each with 0.75 kW and 12,000 RPM; manual positioning of the edge thickness adjustment with pneumatic disengage function via the Control Panel. -- Finishing Units with: 0° - 10° Manual adjustment. Corner rounding unit for soft- and post-forming pieces for processing edges of between 0.4 and 3.0 mm in thickness and 10 – 60 mm in height. Finishing Units: 2-Axis, motor-driven, position-controlled radius trimming unit incl. pneumatic reverse function. Buffing unit with (2) motors. -- Complete with: Cleaning & Release Sprayers; T & B Buffing units. -- Actual Model is: ALTENDORF F5 (aka Herbrock F5).

--This machine is Lot#001 in an Auction on exfactoryauctions.com - NO RESERVE-- ALTENDORF ELMO CE 3,400 mm (11') 4-Axis Programmable Sliding Table Saw Specifications: Max. cutting length 3,305 mm (130.12"). Max. depth of cut with 450 mm (17.72") dia. blade: 75 - 150 mm (2.95" - 5.91") at 90°; 53 - 106 mm (2.09" - 4.17") at 45°. Dado cap. 15 mm (0.59"). Main saw: 5.5 kW (7-1/2 HP) Motor with automatic brake; blade dia. 450 mm (17.72"); arbor dia. 30 mm (1.18"); arbor tilt 0° - 45°; blade speeds 3,000, 4,000, 5,000 & 6,000 RPM. Scoring saw: 0.75 kW (1 HP) - 9,000 RPM Motor; blade dia. 120 mm (4.72"); arbor dia. 15 mm (0.59"). Equipped with: 14-1/2” x 134” x 36” H Aluminum sliding table with middle & end position locking; fixed table. Main saw blade programmable height & tilt adjustment. Automatic main saw blade height/tilt compensation. Scoring saw motorized rise & fall and Iateral adjustment. "TYPE 1160-160-30" 47” L x 3-1/2” H Programmable rip fence with: 1,300 mm (51.18") Cutting width cap.; 15 MPM (49 FPM) positioning speed; automatic dimensional correction for saw blade tilt. "TYPE 1160-160-31" Programmable crosscut fence with: 3,200 mm (125.98") Cutting cap.; 15 MPM (49 FPM) positioning speed; 700 mm (27.56") cross slide extension; (2) flip stops; sliding outrigger support. Eye level touchpad control with LED Displays for main saw blade height & tilt, rip & crosscut fences. Automatic central lubrication for saw unit tilting with: Digital oil level monitoring. Swing away, parallel blade guard.