Equipment For Sale

GANNOMAT - DB21, Construction/Line BoringVertical/horizontal drilling; (21) spindles.Specifications: -- Drills vertically from the bottom-up; horizontally from the back or any angle between 0° - 90°; tilting action of the boring head is pneumatically controlled. -- 21-Spindle head; 2 HP - 3,000 RPM motor; spindles on 32 mm centers. -- Tilts pneumatically with switch control; graduated degree scale from 0° - 90°. Complete with: -- (4) Overhead holddown clamps; frontal top stops; 70" (1,800 mm) left & right-side fence; line boring fence, and 45° Miter set-up stop.

GANNOMAT COMBI 110 CONSTRUCTION LINE BORER(23) Spindle head, 2 HP - 2,800 motor, 31-1/2" max. working width, 3" drilling stroke, drills vertically from bottom and horizontally from rear, tilts pneumatically from lower to rear position with positive stop at 45° for angle drilling. -- Holddown clamp assembly tilts 90° for clamping short panels vertically for edge boring, no need to swivel boring head, hydraulic brake for through boring. -- Complete with: (4) Pneumatic holddowns, mirror imaging fences, 4,000 mm line boring fence w/stops and 1,500 mm butt joint fence with (2) flip stops.

GANNOMAT - Elite 25, ...Construction and Line Hole Boring Machine25-Spindle construction hole & line hole 32 mm Boring Machine. -- Specification -- 2 HP - 3,400 Motor; 31" (768 mm) max. working width up to 34.4" (900 mm) through feed width. -- Adjustable drilling stroke up to 3-7/8"; line drilling up to 11-3/4" from edge. -- Drills vertically from bottom and horizontally from rear; pneumatic tilting of boring head from 0° - 90°; pneumatically operated rear stop with selector switch. -- Features: Quick, removable side stops for conversion to line boring; mirror-image fence setting device. -- Complete with: -- Side fences with micro-adjustment; optional line drilling fence; (3) flip stops. -- Pneumatic holddown clamps; foot control; emergency stop button.

Gap 960 3 Stringer Pallet Nailing Machine S/N 99929

Approx. 1999 GAP 960 3 Stringer Nailer with Stacker

Gardner Denver Electra-Saver II 75HP Screw Compressor

Gardner Denver Air Compressor - 25 HP - Gardner Denver Air Dryer - 250 Gallon reservoir and stand

50HP Gardner Denver Screw Air Conpressor

Gardner-Denver 200HP Screw Compressor S/N N2079

Gardner-Denver 50HP Air Compressor

Gardner Denver Electra Saver II 50HP Screw Air Compressor

Sutorbilt Legend 5M -- Standard, medium-pressure -- Diameter (inlet/outlet): 4" NPT -- Shaft size: 1.125" -- 2,350 Max RPM

2L Sutorbilt -- 5 HP Motor -- 5,275 Max RPM -- Pressure to 15 PSIG -- Flows to 3015 CFM

GARDNER-DENVER 2BV5121 15 HP Liquid ring pump:11.4 kW (15 HP), Volume flow 360 CFM; operates at a low noise level of 74 dBA.Specifications: -- The "2BV5121" series are compact plug-and-play systems for easy on-site installation; pumps are air-cooled, 100% oil-free, and do not require additional water during operation. -- Due to contact-free compression, they are virtually wear-free in operation and require no periodic maintenance. -- The patented discharge-air cooling system ensures that the pumps will not heat up by more than 15K above room temperature; pumps work reliably in continuous operation and are steam resistant & insensitive to condensation of the pumped air. -- Vacuum power units of the "2BV5121" split type are standardized liquid ring pump circulation systems with patented exhaust air cooling for large volume flows. -- A considerable amount of the water contained in the cool exhaust air condenses, remains in the system, and is available as operating water; as a result, many applications no longer require additional operating water.(2) Available, buy both for less than $9,000.

Air compressor was used in food processing and is very clean, variable feed, Seller will load on your truck, ref # 188, Call 931-797-6284

Laminating Rolls: 61" (155 cm) roll face with thermally conductive high release silicone surface; upper and lower main rolls internally heated; temperature controlled by state-of-the-art infrared sensors and digital PID controllers Laminating Opening: 1.5" (3.8 cm) maximum opening controlled with dual air cylinders. Laminating Material Uses heat activated and pressure-sensitive materials 0 - 55" (0 - 140 cm) wide on a 3" (7.6 cm) ID core Laminating Speeds 0 to 14.5 fmp (0 to 4.5 mpm) Post Lamination: Fanless cooling system provides uniform, filtered air for thermal shock without exposure to dangerous fan blades. Vinyl Transfer Complete roll to roll transfer, lamination, and edge trimming in one pass Safety Features • Two emitter-receiver photoelectric systems protect rolls from damage. • Emergency kick cables front and rear. • All electrical and moving mechanical parts are located in bolted cabinets • Four emergency stop buttons Installation Requirement 220 to 240 VAC, 50/60 Hz, 55A. 32 A per phase. Air: 2 cfm at 100 psi, minimum(0.5 m3 at 700 vPa)

480v | Setup for Stringers | Can be converted to Block Pallets

GBN Explorer Pallet Nailer

GBN Excalibur Pallet Nailing Machine

GBN 48" Block & Mat Assembly with Hydraulic Power Unit.