Equipment For Sale

2002 HMC ET-10 Double End Trim Saw.

HMC MDS50 Drop Saw Trimmer s/n 076-00

HMC Two saw trimmer, Model ET10: Operator on left; NO electric setworks--manually operated hydraulic valve type; standard 10HP electric motors on saw blade; standard hydraulic system; NO belt conveyor. Offered as-is/where-is with no warranty or guaranty, as removed from service.

HMC double end trim ET-10 12ft

HMC 2-Saw Trimmer Model ET-10,;Complete with the following features: --16′ capacity. --Push Button Setworks. --Left hand (feeds from left to right). --Cuts up to 8″ thick. --Belt Conveyor for waste.NOTE: Removed from service and it was running just fine at the time of removal. Stored outside.

HMC Debarker Cab Controls 20"x20' Belt Waste Conveyor Model: V206HST S/N: 1518-93

rosser head, slant track, working condition

HMC V-2110 Slant Track Debarker w/60Hp Motor on Head, Onboard Hyds, Controls & Wood Constructed Cab S/N 1827-05 w/Patz 50' Barnsweep, Electric Drive, Counter Clockwise Rotation (20' Section Has A Cover), 10' 8" x 30' 4 Strand Log Deck w/Stop N Load, Hyd Drive, Attached Catwalks, 11" x 27' Ladderback Chain Conveyor w/Hyd Driven Gear Drive & 25Hp Hyd Power Pack

Slant track debarker with cab. New teeth on wheels.

40' x 24" x 6" Dia. Live Roll Case - Cat Walk & Cross Over Steps

HMC 8" X 30" X 22' ROLLCASE W/HYD DRV

HMC AC 50 3HB Carriage (Linier Positioning), Track and Panagraph

HMC AC 50 Serial# 606-96 Cab, Set Works, 3 Head Block Carriage, Rails & Panagraph

HMC AC 50 BD Modular Circle Sawmill with Top Saw, 3 Head Block Carriage, 50HP Carriage Drive, 55' Track, Cab & Controls S/N 551-93

2003 HMC AC40 2 Knee RH Carriage Circle Saw Mill, Cab controls, Rails, Husk

HMC RH 13' Carriage MDL AC40 w/Elect, Air, Tong Dog, 48' Track, Forestall Husk, 24" x 7' Belt w/Top Saw, Includes Cab & Mudata Comp Setworks, Control Box, Transformer & 40HP MTR, Forestall 3 Saw Verticle Edger w/40hp Elect Mtr., 150HP MTR, Forestall Hyd Carriage Drv Feed Works, Chain Type Hyd Log Turner w/Hyd Stop & Load w/Nose Skids, 22" x 18' Power Rollcase, Allen Bradley 150HP Starter, Square D 600 Vac 400 Amp 350HP Disconnect, (2) Square D Size 3 Combo Disconnect/Starters, Allen Bradley Size 2 Combo Disconnect/Starter, Steel Catwalk Around Saw.

HMC AC40 MM-10 Modular Mill Includes Track, Carriage, Cab, Controls, Husk, Top Saw & Carriage Drive S/N 281-83. Out and Ready to Ship

This mill is ready to be removed from the current location. - 4 Roll Cases 24’’ 2 center 6.5 Diameter 45’ 56’ 62’ 70’HMC All motor controls included - 7 Lumber Decks Flat Chains 10’ 12’ 16’ 20’ 24’ 40’ 82’ 5 Chains WIDC All motor controls included - 2 Log Decks - 28’ Long 12’wide 3 chains stop loader - 14’ long 12’ wide 4 chains stop loader - All motor controls included - Newman Trimmer, drop saws, scrap belt chain 100’x 24’ - Unscrambler 16’wide x 5’high 8 chains - Air Compressor Model SSREP100 HP - Air Dryer storage tank - HMC Model mm10 4 heah block carriage 49’ - HMC Saw Booth - HMC Feed Works - HMC Husk 54’ bottom saw 36’ top saw - 200 HP motor - HMC Log Turner - HMC Drop Belt Live Off Barrer - 10 Headrig saws inserted tooth 54” - Roof Top Chain 10ft 5 Chain - Blower system - Tie-Cant Deck 62’Lx13’ W 4 chain all motors & Controls - Roof Top Lumber Deck 30’L x 13’W 5 chains all motors & Controls

HMC 3 Head Block Helle 2 or 3 Vert,Edger 16' Capacity Hyd. Over Air Set Infeed Log Deck Outfeed Deck 375HP J D Power Unit Removed From Service

HMC HC-40, serial #330-1982, 4 head-block carriage, electric set-works, air powered dogs, 40' long track, was used with band head, includes cab, controls and Log Turner (Sawmill), complete unit ready to operate and in good condition