Equipment For Sale

Nye HD Loader Bucket Unlimited options and configuration available. Nye builds standard replacement buckets as well as specialized buckets to suit our customers' demands. Models include Hot Slag buckets, High-Rollout Buckets, Heavy Duty Loader Buckets (HD Buckets), General Purpose Buckets, (GP Buckets), Tire Buckets, Scrap Aluminium Buckets, Stump Buckets, Demolition Buckets, Garbage Buckets, and loader buckets with clamps.

Nye Stump Harvester

Nyle Kiln L300 - L300 Nyle high temperature Lumber drying Kiln - 240v single phase. Capable of temps up to 160 degrees. - Bought new in 1999 Call 800-459-2148 for more info.

Nyle PHT350 Kiln System was powered up and tested, but not put into production.

350 Pallets / 6-8 Cords | 480V | 2023 | BTUh 800,000 | Dimensions 40' L x 8' W x 9' 6" H Drying Time: Summer - Drying: 2 - 3 Days / Heat Treating: 2 - 4 Hours Winter - Drying: 3 - 5 Days / Heat Treating: 3 - 6 Hours

2014 Nyle L200M with 3500 bf hardwood capacity. 220 Single phase. Does not include fans. Includes controls, switches and wires. Power vents. Last used about 6 months ago. Photo is not actual kiln. Call 800-459-2148 for more info.

Nyle Firewood Dry kiln No chamber included

Oakley Edge Sander

OAKLEY H-5 Double Sided Edge Sander. -- General Specs: With 7.5 HP -1,800 RPM TEFC motor; (2) 8-1/2" x 57-1/2" Cast Iron platens; 8" x 164" abrasive belt, 4,680 FPM belt speed. -- Equipped with: One 11" x 62" Cast iron side table on one side and (1) 19" x 64" cast table on the other side, (1) cast iron radius tilting end table, end table tilts 0 ° - 45°; 6" vertical table travel w/hand wheel adjustment. -- Features: Rubber covered direct drive pulley and idler pulley,Complete with: Magnetic starter with overload protection, (8) dead head radius ends with graphite covering, and (1) steel covered spare head roll.

OGAM - PO-340, ...Dip Chain Gang Rip Saw Specifications: -- 75 HP TEFC Motor, dip chain feed with overhead arbor. -- 4.3"; x 13.3"; Cut capacity. -- 16" Max. blade diameter. -- Power rise and fall. -- 70 mm dia. arbor. -- 2 HP Variable feed speed up to 115 FPM.Equipped with & Features: -- Automatic chain oiler. -- (3) Sets antikickback fingers. -- Adjustable infeed fence. -- Motor load meter. -- Many new saw blades.

OGAM Gang Rip 30HP Motor w/electrical still Hooked Up, Model PO 195, S/N 15149

OGAM PO/M Straight Line Rip Saw;Specifications: -- 20 HP Main motor. -- 24"; throat capacity. -- Max. cutting height: with 12" blade 3", with 16" blade 4". -- Min. diameter of circular saw blades: 8". -- Max. dia. of circular saw blades: 16". -- Min. length of working pieces: 10". -- Variable feed speed from 50 -154 Ft./minute. -- Feeding belt width: 11". -- Spindle Speed: 4,500 RPM. -- 36"; x 60"; table.Equipped with & Features: -- Fence and rail system with one stop. -- Infeed table row of anti-kick back fingers. -- Steel smooth top hold down roller. -- Top row of anti-kick back fingers. -- Steel smooth top hold down roller. -- Split hold down steel smooth roller around blade. -- Split hold down steel smooth roller around blade. -- Steel smooth top hold down roller. -- Chain is in excellent condition!

OGAM MODEL PO-340 DIP CHAIN GANG RIPSAW ( THis is a Parts machine only )Specifications: -- 60 HP arbor motor, dip chain feed with overhead arbor, 13-3/8" (340 mm) max. rip cap. (between saw blades), 12-5/8" chain width. -- 9-13/16" Mn. to 13-7/8" max. blade dia., 4-3/4" max. depth of cut (manual raise and lower of the spindle), 70 mm dia. arbor runs @ 4,200 RPM; min. board length 19-3/4" (without short stock feed plate-see photo). -- Variable speed belted feed motor 20 to 100 FPM (approximate).Note From Seller: Ogam Gang Rip Saw. 60 HP motor 230/460. I don’t know much about this machine. Bought it used but haven’t been able to hook it up due to our current electrical service. The person I bought it from says it ran well when taken out of service. Can load on a truck.

Ogden SL3660 RFS

30 brand new Oleson 10" double cut band blades. Entire lot for $20,000.00. Individual blade $1,175.00. Buyer pays for shipping. Call 800-459-2148 for more info.

OLIVER 4470 25" Shelix Cutterhead Planer; 10 HP motor Single Phase, or 15 HP 3-Phase motor. Full 25" of cutting width, over 9" of cutting capacity, and the ability to take up to 1/4" off in a single pass through , Byrd Shelix Cutterhead this planer will take whatever you can dish out. -- The Digital Thickness Controller and Powered Table Travel eliminate guesswork, make dialing in settings a breeze. But ease of operation isn't everything, this OLIVER outputs stock that's true and straight. -- A Sectional Infeed Roller and Chip Breaker apply uniform pressure on uneven stock, coupled with a Driven Outfeed Roller to keep your stock in place. -- And a powerful 10 HP motor Single Phase motor, or 15 HP 3-Phase motor.

OLIVER 4455 22" Straight Knife Planer, 5 HP single phase or 10 HP, 3-Ph.The OLIVER "4455" Planer has a super-wide capacity, it'll handle stock up to 22" wide, and takes up to 3/16" off in a single pass.Specifications: -- 4-Knife HSS straight knife cutter head. -- A Sectional Infeed Roller and Chip Breaker apply uniform pressure on an uneven stock, coupled with a Driven Outfeed Roller to keep your stock moving smoothly. -- Add (2) feed speeds for extra quality, a Digital Thickness Guage for quick reference, and a powerful 10 HP motor. -- Max depth of cut 3/16" min part length 10"; Max work pc 22" w x 9" Thickness.

Oliver Sawmill New Carriage Wheels New battery

OLIVER - 299-D, ...24" Planer (8" thickness capacity) -- Capacity: 24" x 8" Thick planes stock as short as 11". -- 3-Knife steel cutterhead motor: -- 5 HP; 3 PH. -- Sectional infeed rolls: - (12) 2" Wide sections: Sectional chip breaker. -- (12) 2" Wide sections with: 1/4" Independent Lift. -- (2) Driven bed rolls; feed motor: 1 HP - 3 PH REEVES Variable speed 15 - 60 FPM.

14" Max. blade cap., 2 HP motor, 1" dia. arbor tilts 0° - 45° via hand wheel; separate handwheel for raise and lower of the arbor. -- Includes: original miter gauge, counterweighted overhead blade guard, wrench. -- NOTE: Table and Biesemeyer Fence shown in photos have been sold and are not included with machine.