Equipment For Sale

5' x 5' Precision Chip Screen

Precision 6 X 6 Chip Screen.

Precision 55 screener, was working when pulled out of production.

Precision Rosserhead Log Debarker with 60hp motor on head and 15hp electric/hydraulic power unit with 30' carriage

Complete chip plant includes: - The infeed is 12’ above ground level. They were feeding it one log at a time with a shovel. - There is a single chain 12” wide leading to the debarker. - The debarker is a Salem 20” ring debarker with mcdiarmond controls. - From the debarker it goes through I think is a metal detector. It’s is enclosed, 8’ long with a belt conveyor. - 75’ of 3-strand chain that reduces to 2-strand chain for 35’ then goes to another 2-strand chain for 12’ then goes into the chipper. - The chipper is a Precision with 2- 400 hp high efficiency 3 phase motors. - From the chipper the chips drop onto a 42”x50’ inclined belt that leads to the 2 deck screen. The screen is 92”x20’ - The waste goes on a 9”x20’ incline belt and dropped into a truck. - The chips go out on a 3-strand 100’ conveyor (strands are 14” wide) to a radial stacker for loading trucks. The stacker belt is 42”x65’ - Chips can be redirected to blower unit system that will transport them to a rail siding to so they can be loaded into a rail area. It starts out with 75’ of 12” pipe running on the ground. Then it sweeps straight up to a height of about 24’ and goes 150’ to a siding across the county road. The chip loading facility is intact. - The hog is located back by where the logs are loaded onto the chain going to debarker. Here’s a list of the conveyors going back to the Kockums hog. It has a 24”x36” opening at the top. - Conveyors: 12”x100’, 12”x 25’, 12”x60’. All of these conveyors are 1 strand steel.

The seller has confirmed that this 96" Precision chipper is in good working/running condition and is ready to load. This was not heavily run. This came out of a chip plant in WA. Model 96.27 - Horizontal feed - Side discharge - 4-Knife whole log chipper - 8" thick chipper dissc - Built in disc brake - Extended front shaft for hydraulic starter - Hydraulic starting motor - Side discharge pipe with motorized outlet adjustment - 27" maximum log diameter - Many spare parts and knives included - Average production rate: 125 tons per hour - No hydraulic pump - No motor - an 800HP one can be added for additional cost though... The photo's show the optional extended shaft and hydraulic starting motor which is a special feature....

Precison 4k tub type knife grinder

2001 Precision 58" 6 Knife Chip Pack 150HP Elec Motor S/N 3355, 6' x 6' Chip Screen, Cyclone & Pipe S/N S-2375, Precision Dual Trailer Loading System.

Precision 58" 3 Knife Chipper S/N 1973

Precicion 66" Chipper 6 Knife Horizontal Infeed / Top Discharge S/N C-2865

48" 3 Knife Chip Pack S/N C-1029 75HP Electric Motor 5'x 5' Chip Screen

Precision 58" 6 Knife Chipper w/Horizontal Feed Top Discharge S/N 3135

Precision 58" 6 K Chipper. No Infeed Mouth

Heavy duty PRECISION rosser head type debarker model 848H with 7 sets of bull wheels, overall length approximately 45’, operator’s cab with controls, 4 7/16” bull wheel shafts, head included but not mounted on machine, heavy duty model with 12” I-beam frame and includes barn sweep in the bottom of the debarker. Hydraulic system and bull wheel drive is powered by a 25HP electric motor. Price as is/where is with no warranties or guaranties……Price $23,000.00 OBO.   As is where is $23,000.

Precision 48" 3K Chipper S/N 3193

96" PRECISION Chipper - Serial # C-3096. 1998 model, run only 7 months since new. 8 knife, 8" thick disk, bottom discharge. Out and ready to load. Motor available

Precision Husky 23 Chipper Needs engine Has Cummins KT19 650HP

Precision 58" 3K Chipper

Precision 25' Incline & 60' Chain that was in Concrete.

Precision 636 Slant Track Rosserhead Debarker w/ cab & controls